Leaderboard

OK so here is a simple to do guide to get 1x data on palm pre for reliance and also for tata pre requirements 1) palm pre running webos 1.1 or 1.2 ( u can just use update program on pre and do OTA update which is safe) 2) palm pre DIAG drivers 3) root acess 4) qpst 2.7 1) connect ur palm pre to qpst now i m tired of mentioning it again and again on how to root a pre for programming here i m writing it in simple steps a) install palm sdk on ur pc http://developer.pal...ter&sdkdownload make sure u have latest version of java on ur pc c) once sdk is installed its very simple to gain root access on ur palm pre enter developer mode to do so from ur keyboard type konami code it will show developer mode icon , turn it on d) go to startmenu --run --type cmd e) it will open up command prompt f) just type following then type the following now it will show root@castle:/# ←[J now just type done it will ask u for pre drivers and direct to to location where u have it g) now just go to qpst and connect to corresponding com port 2) setting data in qpst when data isn't provisioned on palm pre , u will just see signal bars and battery indicator thats all see this pic of my palm pre without data http://img230.images...7/imag0006z.jpg 1) open up qpst 2) press read from phone , it will ask for spc code , put in 000000 or whatever spc u have 3) go to mip tab and in "mobile ip behaviour" select "simple ip only" 4) u will see user profiles , click on profile 1 and press edit 5) it will open up profile 1 edit screen , clcik tab profile enable 6) in NAI write xyz@sprintpcs.com 7) teethered NAI xyz@modem sprintpcs.com 8) check rev tunnel preferred 9) make primary HA HOME HA AND SECONDARY HA ADDRESS 0.0.0.0 10) press ok and click write to phone see below two screenshots from my pre to get an idea http://img169.images...01oct020004.gif http://img101.images...02oct020004.gif 11) now go to ppp tab u will see an option of username and password, go to UM and AN TABS and write username and password , in this case i wrote it as username - UTS@ relianceinfo.com password- i4gE7DW ( u can put any other username password) click write to phone 12) now press read from phone tab and make sure all settings are there 3) setting up data on handset 1) from ur phone dialpad dial ##evdo# ie ##3836# and select 1xrtt http://img401.images...8/imag0019a.jpg 2) from ur phone dialpad dial ##data# go to browser and zero PRIMARY /SECONDAY NCG and ports done now reboot ur phone if all settings are configured properly ur data will start working u will see a 1x sign next to signal bars ( 1x sign indicates data is activated , if u dont see1x sign it means ur settings are not proper) see pic of my handset after data got provisioned http://img101.images...72/imag0008.jpg pre drivers.rar

^^^ Look here http://www.rimweb.in/forums/topic/26722-all-roms-in-one-post/

City ID cannot be removed till you root (I too dreaded to receive calls from Afghanistan thinking some terrorist was calling me... LOL); anyways, it will go away once the 15 day trial period is over... For data, you need to configure it in qpst - http://mobile5.in/vi...c.php?f=20&t=30 and enter your proper tata username and password under PPP-uM tab... also update tata prl under system tab if you have any voice/sms problem only OR COMPLETE STEP 1 BELOW AND YOUR DATA ON TATA ON THE PHONE WILL START WITHOUT PC Tethering on Incredible (Internet Sharing/Using phone as modem) - As you all know that these bloody buggers at Verizon/HTC have not included the modem driver in the HTC Sync application for reasons best known to them, we have extracted the drivers from the Verizon Access manager application for your benefit - Step 1: Reprogramming your phone from your phone, dial ##pst (##778) - Press Call click "edit mode" enter security code 000000 scroll down to M.IP Settings change MIP Mode to Simple IP only hit back scroll down to Security change the "HDR AN AUTH User Id (LONG) to "proper TATA username" change the "HDR AN AUTH Password (LONG) to "proper TATA password" change the "PPP User Id to "proper TATA username" change the "PPP Password to "proper TATA password" change the "S.IP DUN Username to "proper TATA password" hit back press menu, choose "Commit Modifications." The phone will power cycle. Step 2 - Computer Setup Download Drivers: http://rapidshare.co...r_v2.12.0.0.exe - (WModem_Driver_Installer_v2.12.0.0) - (Extracted from VZAM Setup) run Setup WModem_Driver_Installer_v2.12.0.0.exe Next, plug your phone in to the computer. Let windows take care of the driver installation. Per your version of windows, you'll need to set up a manual dial-up networking connection. Settings you'll need: Phone Number: #777 Username: "<your phone number> or any other proper TATA username" Password: "matching proper TATA password" PS - TATA CDMA User Name = wapuser Password = wapuser Tata prl is here - http://www.rimweb.in...do-prl-of-tata/ also copy prl to sd card and update prl as above in step 1 under PRL tab - Update prl- Do this only if you have any voice/sms problem