Leaderboard

LED backlighting in TVs has been a real boon for end users, while manufactures have been able to create stunningly slim televisions. It also keeps the environmentalists happy since there is no mercury used in LED backlit TVs there by giving you a greener product. We tested quite a few LED based LCD TVs in the past and the difference in power consumption is certainly visible while still maintaining a good brightness level. The problem with the term "LED backlit LCD" is that it's a bit too long, which does not look good in advertisements and posters. Manufacturers have conveniently eliminated LCD and simply highlight "LED", duping customers into thinking they are LED TVs, which they clearly aren't. Today we'll have a look at the different types of LED LCD TVs currently available that offer improved picture quality over the other or even traditional LCD TVs. All LED Backlit TVs are not created equal The first thing that you should know is that not all LED LCD TVs are created equal. Just because the TV may have a sticker that says "LED" on it does not mean you'll get the same performance as the flagship model. Stop and think for a moment, if companies used the same technologies in their high-end and low-end products, no one would look at the higher end models, right? There are predominantly two types of LED backlighting technologies; Edge-lit LEDs and Full array LEDs. The first batch of LED TVs that came out in 2009 were based on this technology and was first showcased by Samsung. Today you'll find everyone using this technology in their "cheaper" LED LCD TVs. Edge-lit typically means the LEDs are placed around the edge, which allow companies to make slimmer TVs. There are no major advantages in this type of LED LCD over conventional LCDs when it comes to picture quality. In fact there are many uniformity issues with edge-lit LEDs, like certain areas of the TV tend to be brighter than others, which we noticed when we reviewed the Sony ZX1. This is cheaper to produce than Full array LED LCDs, since they use a fewer number of LEDs. The other technology that can be found on most of high-end TVs of today is Full array LEDs. As the name suggests, there is a full array of LEDs (see pic) sitting behind the LCD panel. This obviously gives you a more even backlighting with little or no uniformity issues. Mid-range to high end models typically have this sort of backlighting, like the Samsung UNC6500 series. In terms of picture quality, there is no real perceptible difference when compared to an LCD. The only advantage here is lower power consumption and again a slimmer profile. The latest crop of LED LCD TVs feature Local Dimming LED technology, which changes the game altogether. What is Local Dimming LEDs? LG was the first to push out this technology in India and today almost all major brands have Local Dimming (LD) in their flagship models. LD on Full array LED TVs give you the better picture quality compared to the LD on Edge-lit TVs, which was introduced this year in the Samsung UNC8000 series and LG LE5500 series. The LEDs used here are similar to the Full array models except that the array is broken into different zones and the LEDs in each zone can be dimmed or brightened depending on the scene at hand. This gives you very good black levels that rival plasmas, since the LEDs in the dark areas can be completely turned off. There is a little catch here though. The side effect of this is a slight blooming effect noticed up close when a brighter image appears suddenly over a dark background. This happens because when displaying a dark background, the LEDs in that area are mostly off and when a bright object suddenly comes into that area, the LED's light up to full brightness and then dim down to the current selected picture mode. This happens very quickly and isn't very noticeable when watching a movie, but if you connect a PC to it with a static background, it's visible. Despite this, these TV's are capable of delivering the best picture quality among LCD TVs. Commercial true LED TVs don't exist yet How would one define a LED TV? It's when a single LED is responsible for illuminating a single pixel on the screen, which is when you could do away with the LCD panel altogether. Today's high-end LED LCD TVs pack in around 1500 LEDs and a typical full HD panel will have around 2 million pixels. So in order for a TV to be classified as a true LED TV, we would have to have 2 million LEDs powering individual pixels, which is simply not possible today, and probably won't be commercially viable for some time. So you see, no matter how companies try to spin and twist words and create fancy slogans, if a TV uses an LCD panel, it's still an LCD TV and not a LED TV. Sony and LG clearly mention this on their site as LED LCD TV, but Samsung seem to have conveniently dropped the "LCD" from all of their LED TVs, which would easily fool the misinformed. Aren't LED backlit TV's supposed to be cheap? Technically LEDs should be cheaper to produce compared to CCFL based LCDs, but our guess is that manufacturers seem to be cashing in on the hype and buzz generated by none other than them. Everybody wants a slimmer TV for easier installation, more bragging rights, etc. and we seemed to have conditioned ourselves into thinking the extra price is justified. Another reason for LED LCDs being expensive could very well be the manufacturing process not being that mature as yet compared to LCDs. It's probably cheaper to manufacture an LCD, since this technology has been around for a while now and manufacturing units are more wide spread as compared to LED LCDs, which just started hitting selves a year back. What the Future holds In the next three to five years we should be able to see a considerable drop in prices as we adopt newer technology for cheaper and better LED LCD TVs. QD Vision is a company that claims to have developed a breakthrough technology called Quantum dots based on nano technology that is capable of delivering up to 40% more power efficiency and a color gamut over 100% of the NTSC spectrum. This is achievable due to the use of nano sized semiconductor crystals capable of emitting pure red, green and blue light. You should see this technology hitting LED LCD models of 2011, which isn't far away. If you were on the fence on getting an LED LCD TV then we'd say get the one with Local Dimming LEDs if you can afford it, or else simply stick with a cheaper LCD TV, as the color reproduction will be better than the "cheaper" Edge-lit models. Better still, if you have a well functioning CRT at home, stick with that and take the plunge maybe next year when prices go down south. SOURCE: Techtree

For Mannual Setup Follow Below Instruction if u dont want more software on ur taskbar or download the connectify software from below This article will help you convert your Windows XP , Vista and Windows7 based laptop in a Wirelss HotSpot Once you setup your laptop as HotSpot then you do not need a router, switch, hub, etc… to form a network, in fact other laptops or PC's can connect or access the internet through this newly created HotSpot What do I need to set a HotSpot? 1. Active Cable Internet 2. Laptop 3. Wifi on Laptop 4. Wired net connection 5. Or USB Data Card Once you have all the above things mentioned, you are all set to follow the steps: How to setup HotSpot on Windows7 1. Got to Control Panel 2. Click on "Network and Sharing Centre" 3. Under Tasks choose "Setup New Connection" 4. Wireless "Ad-hoc network" 5. Now type in a "Network Name" 6. Choose "WEP" from drop down menu, input the password if you don't want to share the connection with the entire world 7. Click "Internet connection sharing" 8. Done! How to setup HotSpot on Windows Vista: 1. Got to Control Panel 2. Click on "Network and Sharing Centre" 3. Under Tasks choose "Setup New Connection" 4. Wireless "Ad-hoc network" 5. Now type in a "Network Name" 6. Choose "WEP" password if you don't want to share the connection with the entire world 7. Click "Internet connection sharing" 8. Done! Now a WiFi enabled machine will be able to connect to the network you have just setup with the WEP password Lets setup a HotSpot on a Windows XP machine: 1. Go into Control panel 2. Open "Network Connections" 3. Right click on "Wireless Connection" and click on "Properties" 4. Click on the "Wireless Networks" tab and select the check-box which says "Use Windows to configure my wireless network settings" 5. Under "Prefered networks" click "Add" 6. Type a name in "Network name" text box 7. Select "Shared" from the options under "Network Authentication" 8. Under Data encryption select "WEP" and type in your password in "Network Key" field and now click "OK" 9. Now the new HotSpot should show in the list of preferred networks. 10. Click on the "Advance" button and select "Computer-to-computer (ad hoc) networks only" and press close 11. Hit "OK", we are done with the wireless connection properties One more step, we have to change something in the wired connection setting so that it knows that it has to share connection with the computers accessing our HotSpot. 1. Go to local Area Connections(if wired) or Data Card Connection, right click it and select properties 2. Go to the "Advanced" tab or Sharing in Win7 & Vista and under Internet Connection Sharing check the box which says "Allow other network users to connect through this computer's internet connection" and make sure the box under that is NOT selected so that no one can disable the network remotely. 3. Hit "OK" 4. In Case of Win7 & Vista use Wireless Connection from Dropdown Menu I hope this helps setting up a wireless connection without a WiFi router. Have FuN! Update ...... U can use the Software Connectify too Credits to Tushar for pointing out here's the Link Download Update 12/09/2011 Here are some of the options available to configure a windows 7 laptop as a wifi hotspot or router. http://www.mhotspot.com/ http://virtualrouter.codeplex.com/ http://www.connectify.me/ http://www.mypublicwifi.com/publicwifi/en/index.html Hope this will be helpful to some on this list.

Yey yey yey See Arun, Hitesh bhai mera pehla shikaar , o o o I mean I helped solving a problem for first time. Now don't I deserve to be at the elite panel of RimWeb? He he he just joking, maine to tukka maara tha jo lag gaya. I am still learning and there is still a long way to go, that is why I silenty keep reading the posts to gain more knowledge Aalok bhai ka case mere bhi saath hua tha jo Hitesh bhai ne hi solve kiya tha bas mujhe yaad tha, So I shared it with him. @Aalok bhai it is all my pleassure when I get a chance to help a senior. :-D