Leaderboard

99% of people know how to change mode from NV to RUIM using DFS, This is for the rest 1% who don't know. Download DFS and install on PC. Phone Drivers I'm using a LG G2 LS980 Sprint CDMA model, so illustrating for the said model Know your SPL/MSL code: Dial ##443336772# Shows MSL code near the bottom of the screen, write it or memorize it. Put the phone into DIAG mode: Dial ##3424#, Enter SPC/MSL code and press ok. Select enable and press ok. Your phone is in DIAG mode. Enable Debug in Developer Options of the phone. If you do not have Developer Options under settings simple go to Settings/About Phone/Software Information under this tap on Build Number 10 times continuously and it will enable the Developer Options in your phone. Put the phone in Charge only Now that your phone is connected, Run DFS on PC & Select Ports marked in red. Select LGE AndroidNet USB Serial Port (COM16) -> this can be any number, its 16 in my case. Once the above port is selected it should it indicate like shown in pic below marked in red. Double click on LGE AndroidNet USB Serial Port (COM16) marked in yellow. If properly connected, it should look like its shown in red in the pic below. Enter your SPC/MSL in the SPC field marked in yellow and then press the SPC button. It should say Device Unlocked in the log window of DFS shown below marked in orange. Now select programming marked in blue and then select read in config marked in red. Select the Ruim Config marked in yellow, change it from NV_ONLY to RUIM_ONLY. Once the mode is changed from NV_ONLY to RUIM_ONLY as shown below marked in red, select write marked in yellow & finally select Reset at top right corner of DFS marked in pink. Your phone should reboot and if your phone is capable of taking a RUIM SIM, all features like voice sms and data should work at this time. I try to make my tutorials as noob friendly as possible, if you still have doubts or confused, don't hesitate to ask.

Permanent Unlock GSM LS980 G2 by LG Very Important: CODE: THIS UNLOCK WORKS ONLY ON ZV7 & ZV8 BASEBAND.SO PROCEED ONLY IF YOU ARE ON ZV7/ZV8 & COMPLETE STOCK STATE. WORKS ON ZVA(STOCK STATE) ALSO. Thanks to ankurcshah Downloads Source Phone has to be COMPLETE stock state rooted. How to achieve stock state? here How to root? here Dowload and Unrar, Put the Phone on Charge only Enable Debug from Developer Option Under Phone Settings If you do not have Developer Options under settings simple go to Settings/About Phone/Software Information under this tab on Build Number 10 times continuously and it will enable the Developer Options in your phone. Before running the TC you should change the language, its in Russian by default. Go to Total Commander and look for Language folder. Select all the files shown in the pic below and delete them Thats it now its set to English language. Run TC from the Unrared folder then click on the network icon marked in RED and then double click on ADB marked on YELLOW You should be able to see your phone there, double click on it and wait Now go to carrier folder and open it Copy the property folder from the unrared folder and paste it inside the carrier folder like shown in pic. Reboot and enjoy GSM unlock which will receive OTA also To make APN's stick please follow the method mentioned below Go to etc folder Look for apns-conf.xml, now replace it with the one from downloaded one Go to data folder Under data folder look for data folder Under the second data folder look for com.android.providers.telephony Look for database folder Delete telephony.db and reboot you phone APN's should stick after this THANKS to yasbxe Please donate to him.

Sprint Moto X & any Moto G Flashed to Reliance CDMA FINAL Photo Tutorial Updated:- 08/04/2014 New Method Works 100% Follow easy to use , Modified Photo Tutorial http://www.slideshare.net/hambarde/moto-g-ver3final _________________________________________________________________________________________________ Tested on Verizon and confirmed to be working on Boost model. 1) First we need working wifi connection on phone 2) Then an APK from this link >> http://www.mediafire.com/download/i038c12rrdcbtlj/SPCUtility.apk 3) Allow this MSL app to use WiFi, 4) It gives you SPC, [Works on Verizon and Boost both] [Also works with sprint Moto X] 5) for boost Moto G and Sprint Moto X ##diag# works, but dose not work for Verizon. 6) For verizon Diag , Turn off mobile, remove usb cable, and Press both vol key + power button. 7) As soon as you leave these keys , one menu will pop-up. 8) use vol down keys to select BP Tools then connect use cable. 9) then press vol up . Phone will boot normally with DIAG turn ON. 10) for Boost ##diag# require SPC, which you will get it by SPC apk. 11) now PC will search for drivers (even latest moto driver pack dont have drivers for this) 12) attaching drivers for moto g DIAG. (install it manually) 64Bit Drivers | 32Bit Drivers 13) Use DFS, send SPC. and Put phone in Offline-A mode 14) then you need to change phone and min number to any 1234567890 to change PRL 15) till that time PRL wont change, 16) From DFS you can write AKey. 17) But for data need to use DUMP file, 18) you can use CW nv item write and write DATA DUMP, use free NV Item writer from CW http://www.cdma-ware.com/workshop/nv-items/NV-items_reader_writer.rar (get CW3.6 Dump after registration) here also need to put phone in Offline-A mode before writing DUMP to phone 19) after writing all above, go to DFS and change Min and MDN to ZERO so you will be ready for activation (*228). 20) As you always do - Hit Like UPDATE :- If phone is on 4.3, then you should first update to 4.4.2 then do above steps, other wise you need to redo data settings and might have to flash PRL again. Here are official drivers from Motorola http://www.mymotocast.com/download/MDM?platform=windows I have not tested it but hope this works. These official driver dont work, use above 32bit or 64bit drivers Update : 19/03/2014 1)32bit Drivers mention in point no -12 are tested on WinXP 32bit and on Win7 32bit 2) 64bit Drivers are tested on Win7 & 8 64bit. 3) After factory reset, Min and akey stays as it is, But need to re-configure DATA and PRL. 4) One Click update to 4.4. for boost works perfectly from fastboot mode. Link [and it takes only 10min to update from 4.3 to 4.4.2] 5) Need to reconfigure PRL and DATA after one Click update [same as updating on Wifi] Update 25/03/2014 Photo tutorial [Drivers and Sending SPC] LINK removed, use link on top Update 08-04-2014 (use link on top) Photo tutorial [ Till voice and sms configuration] Data config will be updated sooooon...... LINK removed, use link on top Update :- 14apr14 Getting many msg about not finding software for using tutorial so here are all the software required Dfs demo http://cdmatool.com/downloadFiles/application/Setup%20DFS%2014.03.26.0.zip Nv writer 3.6 http://www.cdma-ware.com/workshop/nv-items/NV-items_reader_writer.rar Spc apk http://www.mediafire.com/download/i038c12rrdcbtlj/SPCUtility.apk 32bit drivers moto g & x https://www.mediafire.com/?ic25458youq1xd9 64 bit drivers https://www.dropbox.com/s/ucr03xx6esqtcdc/DroidX_Diag_x64.rar Moto G MTP Drivers For Win XP SP3 [Modded by Me] https://www.dropbox.com/s/37hpk21lc26h78i/wpdmtp.inf Sent by Moto G on Reliance CDMA DroidX_Diag_x64.rar

Requirements Phone needs to be rooted, How to root here Install Rom Toolbox Lite Run Rom Toolbox Lite, Select Root Browser Select system folder Select app folder Search for OmaDmclient.apk, then click and hold the file till it popups a secondary menu, in secondary menu select RENAME. Rename OmaDmclient.apk to OmaDmclient.apk.bak and press ok. Repeat the same for the below mentioned apk's Activation.apk SPR_Skyfire_observer.apk SPR_Skyfire_Toolbar.apk SprintExtensionProvider.apk SprintID.apk SprintTouch.apk Vtt-Sprint.apk Zone-Sprint.apk xtra_t_app.apk Reboot Phone. DO NOT INSTALL OTA OR UPDATE PHONE WITH THE ABOVE MODIFCATION. If you are on ZV7 or ZV8 and if you receive OTA its very very important to rename all the above apps back to original state and only then install the update.

The reason behind all the tutorial is, lotsa people call me or pm me to help them, this site has given me friends more like my family. lot of people have helped me here when i needed it. so doing the same.

^^^ suggestion - Add a LG Diag drivers link to your post.

UPDATE :- If phone is on 4.3, then you should first update to 4.4.2 then do above steps, other wise you need to redo data settings and might have to flash PRL again.

Keep rocking brother. LG G2 master ban gaya aap ne. Sent from my XT1080 using Tapatalk

Reliance has been observing that you are diverting your intrest in achieving gsm unlock in cdma handsets so they must have increased speed for your number to stop you from moving to gsm... Just kidding... Sent from my VS980 4G using Tapatalk

Requirements Root Access APN names of your GSM provider After you unlock the phone follow the steps mentioned below 1 Use root explorer or any other file explorer and get to system/build.prop 2 Click and hold till you get a popup menu, select open with Text Editor (when you do this superuser will ask you to grant permissions, click yes, you will get one more popmenu from the phone saying "the current file system is read only do you want to remount as read-write and continue the operation" CLICK YES. 3 scroll to the end of build.prop and add to lines mentioned below ril.sales_code=LOL ro.csc.sales_code=LOL 4 click the MENU button which is one the left side of PHONE HOME button, choose "Save and Exit" 5 Reboot the phone. 5 goto https://play.google.com/store/apps/details?id=ex.chinyang.android.xshortcut install the xShortcut app 6 run xShorcut app and click on EDIT your SHORTCUT 7 Add the following line in the respective fields Shortcut Name and Icon: Put any name you want here. You can also select an icon. Target Component Package: com.samsung.syncservice Target Component Class: com.samsung.syncservice.dm.hiddenmenu.OMADMHiddenMenu 8 click on OK button, you should have a shortcut on one of your screen like shown below. 9 click on it and run it. it should get you into Samsung DM Services menu 10 select APNs 11 press the MENU button which on the left side of you PHONE HOME button. 12 select + New APN, under NAME type whatever you want(ex Airtel or Idea or whichever you are using) under APN type the Access Point Name of your provider(ex airtelgprs,com for Airtel, Idea_Karnataka gprs for Idea in my state. 13 click on MENU button which is left side of PHONE HOME button and click save. Remember not to set anything else. you can add multiple APNS for different service providers. 14 dial ##3282# and enter your MSL and click on EDIT/OTHER/LET APN SETTINGS, all of your APN names which you have saved SHOULD be therem if its not there redo everything from step 10. It might just show only one APN name, thats because you have a SIM in the slot, if you have a SIM in the slot, it will show the APN of that provider only. 15 select which ever APN you want as per your service provider, you are good to go, 16 goto build.prop again and add # in front of the 2 lines you added earlier. #ril.sales_code=LOL #ro.csc.sales_code=LOL 17 reboot. 18 change from cdma mode to gsm/utms mode, data should work now. How to switch between CDMA/GSM mode in a sec without reboot 1 goto https://play.google.com/store/search?q=Telinfo&c=apps and install TELINFO 2 Run TelInfo and select Device Information 3 Scroll down and select "set preferred network type" 4 select CDMA auto (PRL) when you want Reliance, select GSM auto (PRL) when you want GSM. NO REBOOT required for the SWITCH Hope this helps all enjoy your phone and please hit THANKS if this helped. PIC with data working

I don't have words for thanking you.Really amazing.Just For helping one new user (ofcource me) you have made a entire tutorial.it is very very simple.you have helped me a lot at every step without knowing me.very helping nature.thank you very very much vinod sir.

hitesh bhai, coolpad wala seller bhi apne forum ka hi member hai..

Team venom's VIPER v3.0 Android 4.4 sense 5.5 Gsm works as well as OTA Only for verizon phone Sent from my VS950 4G using Tapatalk 2

HTC Desire 700 5" Inch, Quad Core CDMA+GSM Dual SIM Android for Rs 21,559 >> http://www.ebay.in/itm/DOW-HTC-Desire-700-8GB-Black-Smartphone-CDMA-GSM-/201039592196?pt=IN_Mobile_Phones&hash=item2ecee4bb04&_uhb=1#ht_2418wt_1035 Just 2 days back it was selling for Rs 26,000+! Official Specs Link >> http://www.htc.com/in/smartphones/htc-desire-700/

i found out that fpr getting 3G on Relinace gsm in delhi ( no idea about other cities ) all you need to do is make a new APN and enter following Name : Reliance Gsm APN : rcomnet thats it and save

Sent from my LG-LS980 using Tapatalk Please donate and thank yasbxe for all the time he's put into this. Sent from my LG-LS980 using Tapatalk DONE THAT FIRST AND AFTER THAT POSTED HERE !!!

Shop and ship member ship can be taken by rs 620 . Payment to official Aramax sns bank account thru neft tapatalking.....

How to Unlock RIMWEB Thread Link XDA Thread

^ ^ ^ Try getting 10% discount (Max discount Rs 2500 Min Purchase Rs 5000) on ebay listing of Dell Venue 7 & Nexus 7 2013 by using coupon code LAST190221 OR LAST190221 OR LAST190222

Vinod Ji Lage raho! ! +1 for good find! tapatalking.....

OfficeSuite Pro 7 at Rs 61.58 instead of the usual Rs 900+ >> https://play.google.com/store/apps/details?id=com.mobisystems.editor.office_registered&hl=en

OMG! Facebook is buying WhatsApp messaging app for $19 billion Source New York: Facebook is buying mobile messaging service WhatsApp for $19 billion in cash and stock, by far the company's largest acquisition and bigger than any that Google, Microsoft or Apple have ever done. The world's biggest social networking company said on Wednesday that it is paying $12 billion in Facebook stock and $4 billion in cash for WhatsApp. In addition, the app's founders and employees - 55 in all - will be granted restricted stock worth $3 billion that will vest over four years after the deal closes. The deal translates to roughly 9 per cent of Facebook's market value. In comparison, Google's biggest deal, Motorola Mobility, stood at $12.5 billion, while Microsoft's largest was Skype at $8.5 billion. Apple, meanwhile, has never done a deal above $1 billion. The price stunned Gartner analyst Brian Blau. "I am not surprised they went after WhatsApp, but the amount is staggering," he said.

Seems vinod ji is going for P. H. D. On LS980.... Bravo... Sent from my LG-LS980 using Tapatalk

Its only 8GB version, and we are here for all support !!

Releasing on February 24th in China, later in asian markets. HTC Desire 8 A5_DWG – Dual SIM CDMA + GSM Android Android 4.4.2, HTC Sense 6.0 1.2GHz quad-core Snapdragon 400 processor 5.5-inch 720p HD display 1GB RAM, 8GB internal storage, microSD card slot 13MP rear camera, 5MP front camera Wi-Fi 802.11 a/b/g/n/ac, Bluetooth 4.0

On Moto G do not try *#*#33666633*#*# Phone will reboot to DEMO mode and you wont be able to do anything, on every reboot all data will be lost as its in DEMO mode. to get out of DEMO mode, need to do wipe from stock recovery !! So stay away from demo code !! For bypassing initial activation screen just press home key or recent app key, phone will skip activation !

Thank you Vinod, will do my best to help

I have a nexus 5 from US playstore. The box has IMEI number as well as MEID number. I have tested with GSM and it works perfectly. Don't know how to set it in CDMA. I have tried putting OMH sim, but the phone does not show any network. Any pointers for a newbie ? Thanks