Leaderboard

Google Project Tango Official Website >> http://www.google.com/atap/projecttango/ Say hello to Project Tango Intro VIDEO!

Sprint Moto X & any Moto G Flashed to Reliance CDMA FINAL Photo Tutorial Updated:- 08/04/2014 New Method Works 100% Follow easy to use , Modified Photo Tutorial http://www.slideshare.net/hambarde/moto-g-ver3final _________________________________________________________________________________________________ Tested on Verizon and confirmed to be working on Boost model. 1) First we need working wifi connection on phone 2) Then an APK from this link >> http://www.mediafire.com/download/i038c12rrdcbtlj/SPCUtility.apk 3) Allow this MSL app to use WiFi, 4) It gives you SPC, [Works on Verizon and Boost both] [Also works with sprint Moto X] 5) for boost Moto G and Sprint Moto X ##diag# works, but dose not work for Verizon. 6) For verizon Diag , Turn off mobile, remove usb cable, and Press both vol key + power button. 7) As soon as you leave these keys , one menu will pop-up. 8) use vol down keys to select BP Tools then connect use cable. 9) then press vol up . Phone will boot normally with DIAG turn ON. 10) for Boost ##diag# require SPC, which you will get it by SPC apk. 11) now PC will search for drivers (even latest moto driver pack dont have drivers for this) 12) attaching drivers for moto g DIAG. (install it manually) 64Bit Drivers | 32Bit Drivers 13) Use DFS, send SPC. and Put phone in Offline-A mode 14) then you need to change phone and min number to any 1234567890 to change PRL 15) till that time PRL wont change, 16) From DFS you can write AKey. 17) But for data need to use DUMP file, 18) you can use CW nv item write and write DATA DUMP, use free NV Item writer from CW http://www.cdma-ware.com/workshop/nv-items/NV-items_reader_writer.rar (get CW3.6 Dump after registration) here also need to put phone in Offline-A mode before writing DUMP to phone 19) after writing all above, go to DFS and change Min and MDN to ZERO so you will be ready for activation (*228). 20) As you always do - Hit Like UPDATE :- If phone is on 4.3, then you should first update to 4.4.2 then do above steps, other wise you need to redo data settings and might have to flash PRL again. Here are official drivers from Motorola http://www.mymotocast.com/download/MDM?platform=windows I have not tested it but hope this works. These official driver dont work, use above 32bit or 64bit drivers Update : 19/03/2014 1)32bit Drivers mention in point no -12 are tested on WinXP 32bit and on Win7 32bit 2) 64bit Drivers are tested on Win7 & 8 64bit. 3) After factory reset, Min and akey stays as it is, But need to re-configure DATA and PRL. 4) One Click update to 4.4. for boost works perfectly from fastboot mode. Link [and it takes only 10min to update from 4.3 to 4.4.2] 5) Need to reconfigure PRL and DATA after one Click update [same as updating on Wifi] Update 25/03/2014 Photo tutorial [Drivers and Sending SPC] LINK removed, use link on top Update 08-04-2014 (use link on top) Photo tutorial [ Till voice and sms configuration] Data config will be updated sooooon...... LINK removed, use link on top Update :- 14apr14 Getting many msg about not finding software for using tutorial so here are all the software required Dfs demo http://cdmatool.com/downloadFiles/application/Setup%20DFS%2014.03.26.0.zip Nv writer 3.6 http://www.cdma-ware.com/workshop/nv-items/NV-items_reader_writer.rar Spc apk http://www.mediafire.com/download/i038c12rrdcbtlj/SPCUtility.apk 32bit drivers moto g & x https://www.mediafire.com/?ic25458youq1xd9 64 bit drivers https://www.dropbox.com/s/ucr03xx6esqtcdc/DroidX_Diag_x64.rar Moto G MTP Drivers For Win XP SP3 [Modded by Me] https://www.dropbox.com/s/37hpk21lc26h78i/wpdmtp.inf Sent by Moto G on Reliance CDMA DroidX_Diag_x64.rar

Click & Hold the update, it will give you app info, select that, it will give you Google framework, disable notification. Done. Sent from my LG-LS980 using Tapatalk

^^^^ This is why I love Google. They are not using their tech to snatch others money with un-fulfilable thirst like a rotten fruit co or a patent troll co like M$, which asks arm and leg for thie closed source buggy sw. Google make sci-fi like tech advancements and gives chance for even mango people to feel it. Earlier the balloon project, glass, now this, then contact lens. Thanks Rajan ji for sharing...

Mene to bola hi thaa Sent from my VS980 4G using Tapatalk

On Moto G do not try *#*#33666633*#*# Phone will reboot to DEMO mode and you wont be able to do anything, on every reboot all data will be lost as its in DEMO mode. to get out of DEMO mode, need to do wipe from stock recovery !! So stay away from demo code !! For bypassing initial activation screen just press home key or recent app key, phone will skip activation !

I am traveling right now to Delhi, (office work) will update full details by tomorrow evening. Moto G is possible now ....

Boost moto g is port locked and Verizon one is open. But can't read spc from Moto g I have tried all available apk spc. Tried all available tools like cw, dfs, radiocomm, etc Tried logcat Tried NV items No method gives u spc Also ##data And ##program codes are not working Diagnosis drivers not included even in latest Moto driver pack. BP tools method works for diag mode, and modded Moto x drivers worked. By ignorning spc in dfs, was able to read all Nam and data settings, but without spc they cannot be written. Without spc you cannot flash this phone to reliance. tapatalking.....

virtually got Moto G verizon for testing (thru team viewer) got the diag port thru bp tools just like current moto phones phone dose not respond to cw2.7, also memory is not readable thru cw 3.9 MSL apk dose not work, also verizon spc calculator dose not work.. newest radiocom dose not read the phone,... So cant find the SPC so as on date cannot be flashed ..... big disappointment

Waah Waah .. relief for endless CC calls and emails ... Any number for deactivation ? As it is sometimes needed for transfer of number to other handset. (they need to deactivate HSD to transfer afaik).

Flash & Recovery Solutions for HTC Incredible 2 Common Downloads (Working Tested 21/12/2011) :- Verizon Stock 2.3.3 ---- http://www.megaupload.com/?d=FBLX0135 (PG32IMG_RUU_Vivo_W_Gingerbread_S_VERIZON_WWE_2.18.605.4.zip) Chinese 2.3.4 ---- http://www.megaupload.com/?d=AOQ42MYO (PG32IMG_CN_3.06.1401.0_Radio_1_01_50_0817_NV_MFG_CT_2.71.zip ) HTC Drivers :- Download adb & fastboot :- Download CWM Recovery Image :- Download Remember to do following for most Flash, S-OFF, Recovery to work --- 1. Disable Fastboot (Settings -> Power -> Fastboot -- Uncheck) 2. Enable USB Debugging (Settings -> Applications -> Development -> USB Debugging --- Check & OK) Tool for S-OFF (Will work on Verizon Stock 2.3.3 / hboot 0.97 Only) --- revolutionary.io Note --- You need to S-OFF only once in Handset lifetime unless ........ Hence most of you will need it once only. Files required to get Superuser working on Phone --- Download, Copy to SD card & Flash thru recovery (Install Zip from SD card) in following order --- 1. http://downloads.and...fghi-signed.zip 2. http://downloads.and...fghi-signed.zip Make sure of the Order. Else it might not work. Note : Phone Should be S-OFF Already & CWM Recovery should be installed on Phone. Flash ROM from SD Card 1. Disable Fastboot (Settings -> Power -> Fastboot -- Uncheck) 2. Enable USB Debugging (Settings -> Applications -> Development -> USB Debugging --- Check & OK) 3. Copy ROM to SD Card & Rename to PG32IMG.zip 4. Place it into SDCards root (SDCard must be format by FAT32) 5. Switch off Phone. Press Volume Low & Power Button together & Hold to Put Phone into Bootloader mode and Flash this ROM. 6. Follow steps shown on screen. If everything is OK, Bootloader will automatically take PG32IMG.zip & show option. Volume UP to Flash the Phone & Volume Down to Reboot. After you have flashed your Phone. I suggest to Rename or Remove RG32IMG.ZIP (Rom File) from SD Card so that if you ever go to bootloader again, it does not show Flash alert again. Flash ROM from PC (Using Fastboot --- Personally I like this) 1. Disable Fastboot (Settings -> Power -> Fastboot -- Uncheck) 2. Enable USB Debugging (Settings -> Applications -> Development -> USB Debugging --- Check & OK) 3. You need android-win-tools (adb.exe & fastboot.exe). Extract zip to folder & copy the ROM to same folder. Example (D:\adb) 4. Connect Phone to PC in Charge only Mode. Make sure all drivers are installed. 5. Open Command Prompt (Windows 7 / Vista --- Run as Administrator) 6. Follow Commands --- d: cd adb adb reboot bootloader fastboot oem rebootRUU fastboot erase cache fastboot flash zip <<ROM File Name>> fastboot reboot <<ROM File Name>> --- file name for the ROM. Example :- fastboot flash zip PG32IMG_CN_3.06.1401.0_Radio_1_01_50_0817_NV_MFG_CT_2.71.zip fastboot flash zip PG32IMG_RUU_Vivo_W_Gingerbread_S_VERIZON_WWE_2.18.605.4.zip Flash CWM Recovery from PC (Using Fastboot) 1. Disable Fastboot (Settings -> Power -> Fastboot -- Uncheck) 2. Enable USB Debugging (Settings -> Applications -> Development -> USB Debugging --- Check & OK) 3. You need android-win-tools (adb.exe & fastboot.exe). Extract zip to folder & copy the recovery Image to same folder. Example (D:\adb) 4. Connect Phone to PC in Charge only Mode. Make sure all drivers are installed. 5. Open Command Prompt (Windows 7 / Vista --- Run as Administrator) 6. Follow Commands --- d: cd adb adb reboot bootloader fastboot erase cache fastboot flash recovery cwm-4.0.1.4-vivow.img fastboot reboot Flash CWM Recovery from PC (Using revolutionary --- Easy Way --- Internet Must) 1. Disable Fastboot (Settings -> Power -> Fastboot -- Uncheck) 2. Enable USB Debugging (Settings -> Applications -> Development -> USB Debugging --- Check & OK) 3. go to revolutionary.io 4. Download tool for Windows or Linux. Connect Phone to PC in Charge only Mode. Make sure all drivers are installed. 5. If Phone is already S-OFF, It will ask you to Flash CWM Recovery. 6. Press Y & Enter to flash recovery. Wait for Few minutes, Since revolutionary will download this from Internet directly. 7. Phone will end in Fastboot Menu. Select "Reboot" to restart the phone. How to go to Recovery ---- Using PC --- 1. Disable Fastboot (Settings -> Power -> Fastboot -- Uncheck) 2. Enable USB Debugging (Settings -> Applications -> Development -> USB Debugging --- Check & OK) 3. You need android-win-tools (adb.exe & fastboot.exe). Extract zip to folder Example (D:\adb) 4. Connect Phone to PC in Charge only Mode. Make sure all drivers are installed. 5. Open Command Prompt (Windows 7 / Vista --- Run as Administrator) 6. Follow Commands --- d: cd adb adb reboot recovery Using Phone ---- 1. Disable Fastboot (Settings -> Power -> Fastboot -- Uncheck) 2. Enable USB Debugging (Settings -> Applications -> Development -> USB Debugging --- Check & OK) 3. Switch Off Phone. 4. Hold Volume Low & Power Button together & you will see the Bootloader Menu (hboot menu) 5. Select "Recovery" 6. Phone will Reboot & you will be in Recovery menu. How to go to Bootloader Menu (hboot Menu) ---- Using PC --- 1. Disable Fastboot (Settings -> Power -> Fastboot -- Uncheck) 2. Enable USB Debugging (Settings -> Applications -> Development -> USB Debugging --- Check & OK) 3. You need android-win-tools (adb.exe & fastboot.exe). Extract zip to folder Example (D:\adb) 4. Connect Phone to PC in Charge only Mode. Make sure all drivers are installed. 5. Open Command Prompt (Windows 7 / Vista --- Run as Administrator) 6. Follow Commands --- d: cd adb adb reboot bootloader Using Phone ---- 1. Disable Fastboot (Settings -> Power -> Fastboot -- Uncheck) 2. Enable USB Debugging (Settings -> Applications -> Development -> USB Debugging --- Check & OK) 3. Switch Off Phone. 4. Hold Volume Low & Power Button together & you will see the Bootloader Menu (hboot menu) ------------------------------------------------------------------------------------------------------------------------------------------------------------------- Please post here for all issues relating to HTC Incredible 2. Please Note --- I shall reply to Post made within this Topic. No PM's shall be replied unless I ask for.