Leaderboard

Edit : - 11/3/14 Here Is tool kit for Boost 4.4.2 restore :- https://www.dropbox.com/sh/ryfp0in10o4wyzs/AAAo4-wwJwRptWsi9pXcLU4Ua _____________________________________________________________ 1- Download and install Motorola Drivers: Windows 2- Download and extract the stock firmware of your choosing from: Link-1 or Link-2 The firmwares with '_umtsds' in the file name are for the 'dual-sim' versions of the Moto G DONT FLASH WRONG FIRWARES !! select correct carrier and sim preference we will need 7zip like software to extract .tar.gz 3- if the firmware file you downloaded is a .xml.zip file then download Motorola Fastboot mfastboot-v2.zip and extract the .exe into the same folder as the stock firmware files (the same folder as the .bin and .img files). If your firmware is a .tar.gz file then skip this step. 4- Get ADB (if you don't already have this), I suggest downloading and installing Minimal ADB and Fastboot by shimp208 Here Now real process begins 1) Reboot the phone into bootloader mode. There are 2 ways to do this. The 'hardware' way. a) Unplug the USB cable and power off the phone. Press and hold 'Volume down' then power on the phone. c) Connect USB cable to your computer. The 'software' way. a) Enable developer mode on the Moto G (Settings-> 'About Phone'. Tap 7 times on 'Build Number') Enable USB debugging. (Settings -> 'Developer options' -> 'USB Debugging' -> check) c) Connect phone to computer via USB, you should see a new ADB device detected and drivers installed. d) Open "Minimal ADB and Fastboot". Type: adb reboot-bootloader You should see the Moto G bootloader screen with the following options: Normal Powerup Recovery Factory Switch Console [NULL: null] Barcodes BP Tools 2) Open a command prompt / terminal (Start -> cmd.exe in Win7) and browse to the folder with the extracted firmware. In my case: cd c:\falcon_boost_user_4.4.2_KXB20.9-1.10-1.18_18_release-keys-cid9 3a) If you downloaded and extracted a firmware in .tar.gz format In windows, run the 'flashall.bat' script Type: flashall.bat /eu The "/eu" switch forces userdata to be erased from the device, this is the same as a factory reset or wipe this is recommended when restoring stock firmware. In Linux/OSX run the flashall.sh script. Type: chmod +x flashall.sh ./flashall.sh Downgrading: The scripts will fail with an error on downgrading from 4.4.2 to 4.3. Open the script in a text editor (notepad) and delete (or comment) the following: Lines 89-90 in the flashall.bat file: CALL :fastboot_flash partition gpt.bin IF %errorlevel% NEQ 0 EXIT /b 1 Lines 120-121 in the flashall.sh file: run $fastboot -s "$serial_number" flash partition gpt.bin if [ $? -ne 0 ]; then echo "ERROR: fastboot failed."; exit -1; fi 3b) If you downloaded and extracted a firmware in .xml.zip format. Flash each of the partitions in sequence using mfastboot, you need to enter the following commands one-by-one checking that each one returns an [OKAY] mfastboot flash partition gpt.bin mfastboot flash motoboot motoboot.img mfastboot flash logo logo.bin mfastboot flash boot boot.img mfastboot flash recovery recovery.img mfastboot flash system system.img_sparsechunk1 mfastboot flash system system.img_sparsechunk2 mfastboot flash system system.img_sparsechunk3 mfastboot flash modem NON-HLOS.bin mfastboot erase modemst1 mfastboot erase modemst2 mfastboot flash fsg fsg.mbn mfastboot erase cache mfastboot erase userdata mfastboot reboot Downgrading: The 1st command "mfastboot flash partition gpt.bin" will fail on 4.4.2 to 4.3 downgrade. Skip this command if you are downgrading and continue with the other commands, which should work. 4) Wait, you should now be rebooted into a fully stock Moto G firmware. These steps can be done on unlocked or locked Boot-Loader ! Follow these instructions at your own risk. If something goes wrong don't blame me! most of this info taken from t-bon3 on xda [Moto G thread]

u need a USC Sim to make data working

got this on 9gag

Sprint Moto X & any Moto G Flashed to Reliance CDMA FINAL Photo Tutorial Updated:- 08/04/2014 New Method Works 100% Follow easy to use , Modified Photo Tutorial http://www.slideshare.net/hambarde/moto-g-ver3final _________________________________________________________________________________________________ Tested on Verizon and confirmed to be working on Boost model. 1) First we need working wifi connection on phone 2) Then an APK from this link >> http://www.mediafire.com/download/i038c12rrdcbtlj/SPCUtility.apk 3) Allow this MSL app to use WiFi, 4) It gives you SPC, [Works on Verizon and Boost both] [Also works with sprint Moto X] 5) for boost Moto G and Sprint Moto X ##diag# works, but dose not work for Verizon. 6) For verizon Diag , Turn off mobile, remove usb cable, and Press both vol key + power button. 7) As soon as you leave these keys , one menu will pop-up. 8) use vol down keys to select BP Tools then connect use cable. 9) then press vol up . Phone will boot normally with DIAG turn ON. 10) for Boost ##diag# require SPC, which you will get it by SPC apk. 11) now PC will search for drivers (even latest moto driver pack dont have drivers for this) 12) attaching drivers for moto g DIAG. (install it manually) 64Bit Drivers | 32Bit Drivers 13) Use DFS, send SPC. and Put phone in Offline-A mode 14) then you need to change phone and min number to any 1234567890 to change PRL 15) till that time PRL wont change, 16) From DFS you can write AKey. 17) But for data need to use DUMP file, 18) you can use CW nv item write and write DATA DUMP, use free NV Item writer from CW http://www.cdma-ware.com/workshop/nv-items/NV-items_reader_writer.rar (get CW3.6 Dump after registration) here also need to put phone in Offline-A mode before writing DUMP to phone 19) after writing all above, go to DFS and change Min and MDN to ZERO so you will be ready for activation (*228). 20) As you always do - Hit Like UPDATE :- If phone is on 4.3, then you should first update to 4.4.2 then do above steps, other wise you need to redo data settings and might have to flash PRL again. Here are official drivers from Motorola http://www.mymotocast.com/download/MDM?platform=windows I have not tested it but hope this works. These official driver dont work, use above 32bit or 64bit drivers Update : 19/03/2014 1)32bit Drivers mention in point no -12 are tested on WinXP 32bit and on Win7 32bit 2) 64bit Drivers are tested on Win7 & 8 64bit. 3) After factory reset, Min and akey stays as it is, But need to re-configure DATA and PRL. 4) One Click update to 4.4. for boost works perfectly from fastboot mode. Link [and it takes only 10min to update from 4.3 to 4.4.2] 5) Need to reconfigure PRL and DATA after one Click update [same as updating on Wifi] Update 25/03/2014 Photo tutorial [Drivers and Sending SPC] LINK removed, use link on top Update 08-04-2014 (use link on top) Photo tutorial [ Till voice and sms configuration] Data config will be updated sooooon...... LINK removed, use link on top Update :- 14apr14 Getting many msg about not finding software for using tutorial so here are all the software required Dfs demo http://cdmatool.com/downloadFiles/application/Setup%20DFS%2014.03.26.0.zip Nv writer 3.6 http://www.cdma-ware.com/workshop/nv-items/NV-items_reader_writer.rar Spc apk http://www.mediafire.com/download/i038c12rrdcbtlj/SPCUtility.apk 32bit drivers moto g & x https://www.mediafire.com/?ic25458youq1xd9 64 bit drivers https://www.dropbox.com/s/ucr03xx6esqtcdc/DroidX_Diag_x64.rar Moto G MTP Drivers For Win XP SP3 [Modded by Me] https://www.dropbox.com/s/37hpk21lc26h78i/wpdmtp.inf Sent by Moto G on Reliance CDMA DroidX_Diag_x64.rar

Moto G Boost - 8 Gb version

It is already posted in the First page itself or else you can download the file "http://anything-android.co/getdownload.php?file=D2USC%20Fix/md4_to_mja_ota_update_2.zip"

There is no reliance specific rom of zip U need to use original carrier file. If u have boost use boost file. If Verizon use Verizon. Just save your min before doing this ! tapatalking.....

thanks vinod bhai unlocking done with screen instructions it was easy as 1-2-3....

@ndr696969. I ordered the Boost Moto G again from GEB from i2c since they had already processed the refund for the last cancelled order. This time I spoke to them & they confirmed that if You give 'no complaint undertaking', they would fulfil the order. I've sent them a mail. Fingers crossed now.

Currently Ishop is refusing buying of used phones.. And people are generally refraining from buying through ishop due to their high duty and taxes.. But if you are ordering a new phone then it is still one of the best package forwarders for me since the price you pay while booking is not changed after landing no matter what the package weight turns out to be later on.. ishopinternational "Currently we have kept Used & Refurbished phone purchases on hold for the new calc to be updated for these categories as per the customs policy. We really apologize for the inconvenience caused & will surely keep you updated once the calc is updated by the back end team."

@invisiblebond Just mention "First Time Buyer" in quotation, They are offering rs 500/ off for first time user.

Solution is posted above in this thread. Sent from my HTC One dual sim using Tapatalk

^^^^^ NO... I won't agree... Band-Aid has less number of holes (and that too tiny holes) and its looking much beautiful than stup!d S5, imho... Further the arrangement of holes is also looking good in Band-Aid... Sammy should have fired the one who designed this BullSh!t by now. Even Note2's glossy is looking OK than this.

As we started to live in digital age, remembering passwords for every site became a biggest headache. Offlate, may services have started and we also started using it like, lastpass, 1password, keepass, etc. I myself using lastpass for last 2 years. All these services do good job in managing passwords but none of the above can autofill your credentials on your phone which makes it little useful on mobile. So, here is another services known as paswordbox. Its a freemium service and you can store and use 25 passwords for free but for saving more, you need premium account. Also there is referral program where if you refer to friends, you can get all the premium features for free. Here is my referral link, http://j.pbox.io/1OGEcR5o I am sure, you wont be disappointed. Here are its features:

On your kin device go to the phone application. Once there dial ##77647266488 and call. It will ask you for your Service Programming Code. The default code is 000000. You will now be in a menu labeled "SETTINGS". Navigate to OTHER and then swipe to the left. Here you will see PPro, USB Pass-Through, and USB VID Stream. All of these options will be off. You will want to turn USB Pass-Through on. and here are drivers for you LINK rest is same like normal programing

Even I wanted to ask the same. Guess this time, there would be flood of sale threads.

Sir i am on 4.3 can u let me know how to switch to NV mode instead on NV,RUIM R530's MEID needs to be registered, but not programmed. Before programming it on Reliance, open DFS and goto NV tab and download R530U.nvf file from DFS server, re flash factory NV items, then program it on Reliance. NAM may not stick easily, may require quite an attempts. For RUIM to NV mode change use any CDMA pc software, spc=000000 and use 16 digit password of R970. Setting this phone on Reliance is little tricky (like Axiom) so as always, its our own responsibility to achieve success.

hello,guys,j am using tataindicom in my mts unlocked dongal, i using this setting APN:MEID@omh.ttsl.in usename:internet password:internet NOTE:IT IS IMPORTANT TO SEE UPERCASE ND LOWERCASE ON APN.