Leaderboard

Requirements 1 Stock LG G2 LS980 Firmware 2 LG Flash Tool 3 Dll file for LG G2 LS980 (LGLS980_20130904_LGFLASHv151.dll) 4 MegaLock.dll All the above can be found on zip file here LG G2 LS980 Drivers Once the required files are downloaded and unzipped, install the LG Flash Tool to default C:\LG\LGFlashTool\ Then unzip the MegaLock.dll.zip file and place the MegaLock.dll file in same directory (C:\LG\LGFlashTool\) Very Important Connect your phone to Pc/Laptop Under Pull Down notification of your phone change the USB settings From MTP to Charge Only Under Device Manager of your Pc/Laptop, Right click on Ports(COM & LPT) as show below in red and select properties in yellow. Select Port Settings as show below Select Advanced as show below Select COM Port Number marked in red and choose COM41 marked in yellow as shown below. It should look like as shown below in red Unplug your phone from Pc/Laptop, switch it of. Put the phone in DOWNLOAD mode by pressing and holding VOL UP key and plug in the USB cable, If you see download mode on phone, give it 5 secs and unplug the USB cable from the phone. Phone has to be in DOWNLOAD mode even after unplugging the USB cable. Run LG Flash Tool & select manual mode marked in red as shown below in pic Once you have selected Manual mode, we have to choose the dll related to LS980, select browse as shown in pic below. Choose the dll file as shown in pic below, This dll file should be found in the main unzipped folder. After choosing the dll file now we have to add the firmware which needs to be flashed. so select "add" shown in red in pic below. Now select the firmware file with the extension *.tot (LS980ZV7_1.tot in our case) as shown in pic below. Once both the dll and the firmware are select choose ok as show in pic below. Now press the yellow arrow mark marked in red as shown in pic below. When you select the yellow arrow, you might get a popup saying "MilkyWay Control Port Open FAIL" just select ok as shown below in pic. Wait for it !!!!! IF YOU GET THE ABOVE PIC !!! its time to connect your phone. Its very important for your phone to be in CHARGE ONLY mode. This you have done earlier in the beginning. Simple connect your phone and wait for the tool to get connected and the flash process to start. Roughly it should take 2 to 3 minutes to flash. The phone will reboot when its still in flash process at around 85% or more. Thats it your phone is fully flashed to complete stock, since its a full flash wait for the phone to boot as if its booting first time. WAIT FOR IT. UNPLUG and enjoy your phone. Feel free to ask questions before proceeding.

Thanks Prihir/Aalok/Kalpesh/Chirag for your valuable inputs. Bought the 10400 mAh Ambrane PowerBank from Paytm for 1349/-. Will test once I receive but it says it will take 7-9 days Have never bought anything from Paytm so hoping its a smooth experience.

Happy b'day admin..!!

Happy birthday Arun.. Sent from my SPH-D710

Happy Birthday Admin ji...

Happy Birthday Arun ji.

Dear Arun ji, many many happy returns of the day, Happy B'day 2 U sent from my HTC EVO design using tapatalk

Happy birthday....god bless

Many Many Returns of the Day Arun ji Triggered from My Moto G

Happy Birthday Arun

Many Many Happy Returns of the day Arun sir

Happy vala birthday Arun Ji ! Sent from my Moto G using Tapatalk 2

HAPPY BIRTHDAY DAY ARUN BHAI Sent From Samsung Galaxy AXIOM

Dear Arun, Wishing you a happy Birthday

@Arun - wish you a very HAPPY BIRTHDAY! Sent from my SCH-I535 using Tapatalk

@HP - Belated BIRTHDAY WISHES Sent from my SCH-I535 using Tapatalk

Happy Birthday Arun!

My Recent Hardware Purchases... A] SANDISK 16GB 2in1 USB Disk As my both phones lack SD slot, there is a need for this one. This comes with protective covers (both USB and microUSB sides) and doesn't gets heat like other 2in1 drives. Got it from Chut!yaKart (my last purchase from them) for Rs599/- B] SONY BT Stereo Headset For killing boredom during my long travel period. It accepts pairing via NFC, the in-ear headset given is good enough, battery life is also good. Got from offline shop Poorvika, damages to pocket 2400 C] 64GB OnePlus ONE phone Got my love phone after too many hassles... Had to pay a little Premium, in order to escape Mi3 style drama and importing from USA - but its worth it, imho... Damages, almost same as DroidMAXX..

Bought a Xiaomi Mi TV 2 yesterday The biggest challenge now is to get this to india its really huge, the subwoofer bundled alone weights 11kg and the TV along with the soundbar will be around 26 kg Sent from Mi3 CDMA on China Telecom

FIX for people who have installed TWRP and stuck after OTA update Source If you see TWRP everytime you boot after OTA update, Follow the code below. VERY IMPORTANT: CODES HAVE TO BE TYPED EXACTLY AS SHOWN WITH SPACES & PUNCTUATION, ONE SMALL MISTAKE CAN GIVE YOU A HARD UNRECOVERABLE BRICK. You should have ADB access, connect phone and use this command. Code: adb shell dd if=/dev/block/platform/msm_sdcc.1/by-name/fota of=/sdcard/fota-backup.img dd if=/dev/zero of=/dev/block/platform/msm_sdcc.1/by-name/fota After all the code is sent, use TWRP menu to reboot the phone. or use adb reboot command. If you dont have ADB, then use TWRP terminal command and follo the code below. Code: dd if=/dev/zero of=/dev/block/platform/msm_sdcc.1/by-name/fota Reboot