Jump to content
Reliance Jio & Reliance Mobile Discussion Forums

mailbhupal

Members
 View Profile  See their activity

  • Content count

    3

  • Joined

  • Last visited

Everything posted by mailbhupal

  1. By Ram Bhupal Reddy IIIT, Hyderabad. Two steps to enable ZTE MC315 CDMA 1X Reliance. Step 1. Insert the card and do dmesg as root output : 0.0: ttyS0 at I/O 0x2e8 (irq = 3) is a 16C950/954 Step 2. edit /etc/wvdial.conf [Dialer Reliance] Modem = /dev/ttyS0 Baud = 57600 SetVolume = 0 Dial-AT-OK ATDT Command = Init1 = ATZ FlowControl = Hardware (CRTSCTS) Phone = #777 Username = Password = New PPPD = yes Carrier Check = no Stupid Mode = 1 Before running wvdial Reliance do following The trick is simple - you have to play with the UART and the baud_base. Just run setserial on your machine and it will give the following output for UART and baud_base * uart set UART type (none, 8250, 16450, 16550, 16550A, 16650, 16650V2, 16750, 16850, 16950, 16954) * baud_base set base baud rate (CLOCK_FREQ / 16) What i did was that i kept on changing my UART and kept the baud_base as 230400. When I changed my UART to 16550A. And i got connected to the internet running wvdial Reliance [Fyi: I am sending this information using ZTE MC315 CDMA 1X Reliance connected on OS FC5.]
  3. Two steps to enable ZTE MC315 CDMA 1X Reliance. Step 1. Insert the card and do dmesg as root output : 0.0: ttyS0 at I/O 0x2e8 (irq = 3) is a 16C950/954 Step 2. edit /etc/wvdial.conf [Dialer Reliance] Modem = /dev/ttyS0 Baud = 57600 SetVolume = 0 Dial-AT-OK ATDT Command = Init1 = ATZ FlowControl = Hardware (CRTSCTS) Phone = #777 Username = Password = New PPPD = yes Carrier Check = no Stupid Mode = 1 Before running wvdial Reliance do following The trick is simple - you have to play with the UART and the baud_base. Just run setserial on your machine and it will give the following output for UART and baud_base * uart set UART type (none, 8250, 16450, 16550, 16550A, 16650, 16650V2, 16750, 16850, 16950, 16954) * baud_base set base baud rate (CLOCK_FREQ / 16) What i did was that i kept on changing my UART and kept the baud_base as 230400. When I changed my UART to 16550A. And i got connected to the internet running wvdial Reliance [Fyi: I am sending this information using ZTE MC315 CDMA 1X Reliance connected on OS FC5.]
×