vinod6344

one more doubt. if RD5340 only support SERIAL interface, not USB, do u know , which all are the pin connections in the 24-PIN data port of RD5340? is it using the same voltage levels of +15 and -15? i hav built an usb-serial converter, which is working good with other devices. so i jz want to try that with my old data cabe of RD6230, to connect RD5340.

hi me to face the same problem with the 5340 mobile. the prob is not with the cable , its with the phone which dosent suppport direct usb as it doesnt have usb option in data settings. where as even 5130 has usb option i used the same cable with 5130 it works fine but not with 5340. so the solution is buy a usb to serial converter cable or a serial cable . the usb to serial converter cable is usb cable with chip in it so u can connect to usb port but while installing u should choose some serial port which it shows. hv fun enjoy. at present scenario i dont suggest Rconnect unless ur traveling .the other option is take a data card from bsnl and it is 300 rs unlimted /month. check it out with bsnl. regards praveen Thanks Praveen. thanks a lot for ur advice.

i previously owned an LG RD6230, by which i successfully used Rconnect for several months. but nw i have an LG RD5340. When i tried to connect RD5340 with the data cable of RD6230, my computer is not at all datecting any device being connected. Is the USB DATA CABLE of LG RD6230 compatible with LG RD 5340? if not, can i make it compatible with RD5340, by doing some alterations in the cable? i am an electronic engineer, and i hope i cud manage the rest, if some one gives me a clue to solve the problem!!!! THANKS IN ADVANCE.

@vijay You can use data cable of 5130 with your 5340, it is fully compatible. You can even use this cable in LG RD 6230 (I have tested it) I bought LG RD 5130 serial data cable from open market for my LG RD 5340 and its working fine. Cost 200/= Vishal but vishal, i tried to connect my RD5340, with the data cable of RD6230. But my computer is not at all detecting any device being connected. what can i do>

After Installation of above said application no need to install any other thing. if u want u can installation only modem driver (i.e LGUSBModemDrive_Eng_ver 3.0/3.8/4.5.exe) and go to control panel---> internet connection--->create new connection and enter the all necessary thing. this will work without Rconnect dialer also. First of all tell me which data cable did u purchase?