sivaraj005

Hi Finally internet is connecting from UBUNTU Feisty Fawn 7.04 using RELIANCE ZTE PCMCA card. Following are the command I tried. Thanks for the group for providing the help. setserial -g /dev/ttyS* setserial -ga /dev/ttyS* setserial /dev/ttyS3 uart 16750 setserial /dev/ttyS3 baud_base 230400 wvdial Reliance or setserial /dev/ttyS3 uart 16550A setserial /dev/ttyS3 baud_base 460800 wvdial Reliance Thanks Sivaraj.v

Hi, I did above all steps.Finally it is working for me after six months.It connects to net some time. Some times it is not connecting. I also did dmesg >sample.txt When I looked into sample.txt it shows kill switch is turned on. If kill switch is turned on, wvdial says modem is not responding. Can you help me how to turn off kill switch? [ 17.380000] NTFS volume version 3.1. [ 17.716000] ipw3945: Radio Frequency Kill Switch is On: [ 17.716000] Kill switch must be turned off for wireless networking to work. [ 22.376000] PPP generic driver version 2.4.2 [ 22.416000] NET: Registered protocol family 10 OS - UBUNTU Feisfy Fawn 7.04 Laptop model- Acer 5583 Regards, Siva.

setserial /dev/ttyS3 uart XXXXX XXXXX - 16550A,16650, 16650V2, 16750, 16850, 16950 and 16954. and kept the baud_base 230400 for each try setserial /dev/ttyS3 baud_base 230400 I changed the set serial and the baud rate. Even after tried wvdial several times, I can't connect to internet from ubuntu. --> WvDial: Internet dialer version 1.56 --> Initializing modem. --> Sending: ATZ --> Sending: ATQ0 --> Re-Sending: ATZ --> Modem not responding.

setserial command does not give any output in ubuntu 7.04 feisty fawn

Hi, I am having ZTE MC315 CDMA 1X Reliance data card. I am using Ubuntu 7.04 OS. I tried the steps specified by you. Below I listed my wvdial.conf file ***************************************** #[Dialer Reliance] [Dialer Default] Modem = /dev/ttyS3 Baud = 230400 SetVolume = 0 Dial-AT-OK ATDT Command = Init1 = ATZ FlowControl = Hardware (CRTSCTS) Phone = #777 Username = (my mobile no) Password = (my password) New PPPD = yes Carrier Check = no Stupid Mode = 1 ****************************************** After saving wvdial.conf file, I executed following commands. But they are not working. Following commands are not working in my machine * set UART type (none, 8250, 16450, 16550, 16550A,16650, 16650V2, 16750, 16850, 16950, 16954) 16650, 16650V2, 16750, 16850, 16950, 16954) bash: syntax error near unexpected token `(' * baud_base set base baud rate (CLOCK_FREQ / 16) bash: syntax error near unexpected token `(' ************************************************ Then I ran wvdial. But I got the following result "Modem not responding" root@mylaptop:/etc# wvdial --> WvDial: Internet dialer version 1.56 --> Initializing modem. --> Sending: ATZ --> Sending: ATQ0 --> Re-Sending: ATZ --> Modem not responding. How to solve this problem. Please help me. Tahnks & Regards, Sivaraj.v