nikhilraut

hello all, seems that this post is being pinned as important.

now the steps first download the drivers fromm the following link http://www.mev.co.uk/zip/usb_232_485_drivers.zip this drivers only work with the original cable now unzipped the file now serach the FTDIPORT.INF IN THE FILE U WILL FIND THE FOLLOWING TO ENTRIES 1. [FtdiPort232.HW.AddReg] HKR,,ConfigData,1,01,00,3F,3F,10,27,88,13,C4,09,E2,04,71,02,38,41,9c,80,4E,C0,34,00,1A,00,0D,00,06,40,03,80,00,00,d0,80 2.[FtdiPort232.NT.HW.AddReg] HKR,,"UpperFilters",0x00010000,"serenum" HKR,,"ConfigData",1,01,00,3F,3F,10,27,88,13,C4,09,E2,04,71,02,38,41,9c,80,4E,C0,34,00,1A,00,0D,00,06,40,03,80,00,00,d0,80 NOW IN THE ABOVE BOTH ENTRIES REPLACE 1A,00 WITH 0D,00 NOW THE INF FILE IS MODIFIED THIS WORKS IN THE FOLOWING WAY IN THE WINDOWS VIRTUAL COMM THE SPEED 115,200 IS REPLACED BY 230,400 NOW WHEN U SELECT 115,200 IN THE COM PORT SETTINGS THE BAUD RATE IS SET TO 230,400 NOW GO IN DEVICE MANAGER UNDER UNIVERSIAL SERIAL BUS CONTROLLERS SELECT USB TO SERIAL CONTROLLER NOW UPDATE THE DRIVERS MANUALLY BY GIVING THE LOACTION WHERE U HAVE DOWNLOADED THE MODIFIED DRIVERS AFER IT ALSO UPGRADE THE DRIVERS FOR USB SERIAL PORT MANUALLY BY GIVING LOCATION OF THE MODIFIED FTDIPORT.INF FILE NOW EVERYTHING IS OK ON THE COMPUTER SIDE DO THE ABOVE PROCEDURE WHEN THE CABLE AND THE PHONE ARE CONNECTED TO THE PC. NOW REMOVE THE CABLE AND RESTART THE PC AND SELECT THE BAUD RATE IN THE PHONE TO 230,400 NOW THE PHONE WOULD BE ABLE TO CONNECT AT 230,400 SEND YOUR REPLY

here are the results

Hmpffff, Time to do some troll The DTR speed you mentioning is between phones modem and your usb-serial port, and it don't show anything about the DTR between your phones modem and service provider BST. Thought CDMA 1x RTT ideal speed is far more then 230.4 Kbps, but in practical maximum speed of around 153/76 Kbps can only be achieved. Now here lies the darn problem, because almost all PC in mass uses the serial interface having maximum DTR of 115 Kbps, so it becomes a habit to say the same about actual speed. Which is far away from truth anyway. Most of the CDMA phones have the options to select different DTR between modem and the assocaited serial interface at PC end { I am not counting about the native USB interface, CDC-ACM standard have less headache whileg negotiating DTR }. There is no such thing like original or duplicate USB-2-SERIAL converter cables, different chipsets used in them have the same objective to achieve and they being designed for the same. I am using TI( Texas instruments ) chipset based prototype card to serve my need and it's working smoothly. Most of the speed problem you guys are facing because of inherent flaws built inside the driver core of micro**** OS, where you have to define too many nonsense and what every another chipset making company try to avoid :-(. Cheers .................. 33758[/snapback] hello dacodecz, as u say shown is not DTR between phones modem and service provider BST. please sir then why do the downloding speed increase plz explain?? early i used to connect at 115kbps with the same lg rd6130 with the handset set at 115,200kbps. the downloading speed did not crept above 10 but when i tweaked the inf file and connected at 230.4kbps the downloading speed went upto 15kbps. SIR I a am a novice user which OS u use and what's your maxium downloading speed u get using your lg mobile????? Plz reply soon

hello anujit, U have a smasung 563 connected at 230kbps so why not lg cdma mobile phone connect at 230kbps. I know the actual downloading speed is far to loo than 230kbps. for me the average downloading speed for my lg rd6130 is around 15kbps. in lg mobiles there are options to change the baud speed. I am a newbie and not as advanced as u are any way for lg mobiles connected at 115.4kbps using any cable grey or original the downloading speed for me was not going above 10kbps. while the average speed was just 5-6kbps. trust me after this method i selected the baud rate on my lg phone to 230kbps and the connection was made showing 230.4kbps. now for me the average downloading speed is about 10-11kbps. samsung mobiles have direct usb interference so it does'nt make difference using a grey market cable or original one. anujit please go into the matter and tell me if i am wrong

hello ReDshift, first thanks for your comment the ftdi is the chip for the serial to usb conversion. In gray market cable the converter chipset is prolific 2303. in my original usb data cable the converter chipset is ftdi . i think this method is not handset dependent if u have a lg handset and a original data usb cable u may be able to use this method. is there option to change the baud rate in your lg 2030 handset??? in my rd6130 it has options to change the baud rate of the handset the selectable baud rates are usb/115,200/230,400 Which cable are u using?? i have not tried this method on a gray market cable though i have one of it. i will try this method on the gray market cable and reply u soon

hello every body, I recently purchased a lg original usb cable for lg rd6130. The cable is not a native USB cable but a USB to Serial interference cable having ftdi chip for the serial to usb conversion. The problem was when i was connecting to the net i had to select the baud rate on the phone and the pc to 115,200 bps. AS a result the connection was made at 115,200 bps. I tried to increase the virtual comm speed to 230,400 bps but the maximum selectable speed was 128,000bps. the downloading speed for this 115.4kbps was around 8kbps which is very slow as compared to samsung handset connected at 230,400 bps for which the downloading speed was 15kbps. I updated the ftdi drivers but the serial port speed did not increase as isit showed only 128,000bps baud speed the max. I searched the net to see whether i could increase the speed of the serial port to 230,400bps I found the following link http://www.mev.co.uk/usbbaudspoof.htm. I followed the steps and modified the fdiport.inf. now i am able to select the baud rate on my phone as 230400 kbps and my connection is made at 230.4kbps and the downloading speed is about 15kbps but this procedure is only for usb cables having ftdi chipset. if instered contact me at nikhilraut@hotmail.com

hello all, can somebody help me on how to use bitpim on lg rd 6130. does anybody knows the filesystem of 6130 where to upload ringtones and wallpapers. I was able to view the filesystem of 6130 using bitpim the file system does not show the .dat file. please help

hello dacodecz, I have lg rd 6130 handset does it has direct usb interference?? Cheers ...........................

hello I am using usb cable with usb to serial interference is any cable available with direct usb interference for lg mobiles

hello all, for the cheetah data cable we have to select the data baud rate to 115,200. Is there any restriction for the original data cable i am thinking of buying the original lg but the availablity is very poor i contacted the lg cdma department about the original data cable they said to contact MR Chetan Chetan S. Naik. Engineer ( I & C) - CS LG Electronics India Pvt. Ltd. Mumbai. E mail : chetan@lgmobiles.com for the original usb data cable if anybody are interested they can contact him for the cable I was using samsung N191 with original data cable the connection was made at 230kbps and the average downloading speed was 15kbps. for the lg rd6130 with cheetach data cable the connection is made at 115.2kbps and the average downloading speed is 8-10kbps WILL using the original data cable increase the speed??? post reply

hello all, can anybody know how to upload images and rington's by using the bitpim software for lg rd 6130. the file system directory in bitpim does not show dat file or the midlet folder. also is it safe to use bitpim please help as reliance charge too much to download a ringtone.

hello, dhiren I too use the cable from gray market. it works fine for me and i am using lg rd7130 driver'sfrom the reliance for my rd6130. AT first has your cable worked for the net if no then replace your cable. The gray market cable's are not guranteed to work.

link starter is a programme to upload pictures taken from lg mobiles to the pc

hello all, I got the lg link starter to work. Trust me it really works. first start the lg desktop lite enter the user name and password. now click the sync buttton on the desktop lite software select the usb com port (available com port) the com port where the modem is installed. now run the lg sysnc manager let the software run the software will get the contacts from the phone now the phone will restart. now start the lg link starter stop at the first sccreen do'nt click "yes" now double click the lg sync manager in the desktop tray the software will serach for the connected phone. now the IMP wait for some few seconds and cancel the lg sync manager connecting the phone. now click yes on the lg link starter. wow the lg sync software rellay works i uploaded all the picyures taken on my lg rd 6130. the above mentioned method is well tested any queries please e-mail nikhilraut@hotmail.com i will be glad to help