hiteshkkk1

I got 500mins free T2T from TATA Indicom for next 2yrs in Maharashtra... Retained...

Hi friends... I have 2 gateways in my network viz ADSL & VSAT. For adsl, i have wifi router. Now, I want to use both the gateways simultaneously. For that, I have done below things. My VSAT gateway ip is 177.177.3.209/255.255.255.248 Accordingly, i had changed my router's lan ip to 177.177.3.210/255.255.255.248 PCs are from 177.177.3.211 to 214 / 255.255.255.248 & default gateway is 177.177.3.210 (adsl) Now, internet works flawlessly. Also, my applications that run on vsat access just 3-4 different ips. For that, i had made batch file in following format route add 162.50.50.2 177.177.3.209 where 162.50.50.2 is ip to be accessed thru vsat Till now, everything was working fine. I can use internet as well as my vsat based application both at the same time. Coming to problem, I have now increased no. of PCs in my office to 10 & also some IP devices like wifi camera n etc. But, I am unable to assign them IP address since as far as i have read, subnet 255.255.255.248 allows only 6 series of ip address. Now, I cant change my subnet as it has been assigned by my vsat provider HCL comnet. So, what other options are available to me??? I have 2 ideas in my mind but not sure how to do it n if it is possible or not. Idea 1. Set my adsl router as 192.168.1.1 / 255.255.255.0 n all PCs in range 192.168.1.2 n so on. Now, is there any setting in router which can route requests for 167.50.50.2 thru vsat as 2nd gateway??? I have read abt static route can do it but not sure how to do it... Idea 2. Set my adsl router as 192.168.1.1 / 255.255.255.0 n all PCs in range 192.168.1.2 n so on. Also, there are only 4 pcs which access thru VSAT. So put secondary IP in those pcs as 177.177.3.210 to 213 / 255.255.255.248. Even here, I am not sure how to proceed. Hope i have been able to explain the problem correctly n awaiting foolproof solutions. Thanks in advance..

I need Zyxel ADSL Modem... Let me know how do we proceed...

You will get on-net benefits even on ported no. All operators have done necessary arrangements for the same.. Also, in case of DOCOMO, you can check if any no. is part of DOCOMO or not on this link...

For GSM, I feel SE Xperia x10 Mini should also be included. Its around 9k. Check this link..

Yes.. all of them on a single pc with names of my family members. No issues till now. I use any ac which has best coupon n have observed many times all ac will hav some diff scheme like 5% max 500, 10% max 500, 10% max 100, flat 100 on min purchase of 105 n so on. Sent from my GT-I5700 using Tapatalk

500 coupon is sent to very few ebay ac which are inactive since long. I got it for 2 ac out of 5 n used both of them. Bought belkin 8port gigabit router n micromax 3g usb modem both for 2.5k - 500. Sent from my GT-I5700 using Tapatalk

Hello friends... Sharing with you mail I had received from my Bulk SMS Provider. He says these rules will be effective from 01/02/2010... Highlights :- $ There will be two types of SMS -- (i) Transactional (only for Bank or Financial or Insurance or Credit, also Airlines or Railways also registered educational Institution to parents ,any other message specified time to time) (ii) Unsolicited commercial communication ( Promotional) $ Every Access Provider (Operators) shall maintain & operate a register i.e Provider Customer Preference Register (PCPR), its the new name of DND list at operators end. $ Now this Register will be in two part Full Blocked (all the numbers in DND will come under this) other is Partially Blocked ( means will get the sms only from his preference category- 7 such categories ...... Category 1-( START 1 to 1909)--> Banking/Insurance/Financial products/ Credit Cards " 2-( " 2 to 1909)--> Real Estate " 3-( ' 3 to 1909)--> Education " 4-( " 4 to 1909)---> Health " 5-( " 5 to 1909)----> consumer goods and automobiles " 6-( " 6 to 1909)--->Communication/Broadcasting/Entertainment/IT " 7-(START 7 to 1909)---->Tourism & Leisure " Also customer can choose multiple preferences eg. for Banking and real estate -- "START 1,2" Changes Due to New Rules :- # Fines Become too much ,,, 1st Notice - 25000/- 2nd Notice-75000/- 3rd Notice- 80000/- 4th Notice- 120000/- 5th Notice- 150000/- 6th Notice- 250000/- also can be black listed ,which will be for 2 years

Reliance evdo started in Jalgaon maharashtra. Cud not chk speed as I m not a reliance user.

My speedtest result in Jalgaon for BSNL 3G using Samsung Galaxy Spica...

Docomo 3g signals live in Jalgaon....

I am using below codes successfully... 114+10 digit local number (only tata or any other pvt operator n not bsnl) to divert all calls 115 to cancel 1220+10 digit for divert if busy 1221 to cancel 1222+10 digit for divert if sw off or out of range 1223 to cancel

Have bidded for you too... Will update u once i win the auction... PM me ur name / add / numbers..

Hi friends... Just won auction on ebay.com for below 2 products.. 1. http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=320621072030 Paid1600/- approx. Item yet to arrive. Getting same type of product on ebay.in for 2850/-. 2. http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=330493498896 Paid2830/- approx. Item received yesterday & must say its value for money... Want to buy one more but getting none below 80$... Waiting for new auctions & my max limit is 65$. FYI.. Parcel received in 10-12 days & our postman delivered it.

Can anyone throw light on what will happen to onnet plans?

Nice share parin.....+1 from me

Hello... Rajan bhai / other gurus, pls suggest me a good server config & thin client. Requirements: I need to connect 5-7 PCs thru RDP (in win7 - I have necessary cracks to enable multiple user RDP in win7). Each terminal will connect to this server & their use will be Word Excel (Heavy use, our sheets contain lot of data and some files are even upto 17-18 mb in size.) Browsing Stock Market Backoffice software (DOT NET based - Very less resources hungry) ODIN Terminal (Stock market trading software - Very resource hungry - at any given time, uses around 150-200 mb of memory) I have some configurations in my mind. Pls suggest changes if any. Server CPU/Board - Core i7 with intermediate board having atleast 4 slots for RAM. Any comments n brands pls suggest. Also, cud have selected XEON but I read it does not support Hyper Threading. Also for Win7 I feel i7 wud be good. RAM - initially 8gb & if reqd, upgrade to 16gb. Pls suggest brands / other parameters like fsb n all. Storage - 80GB Intel SSD & if budget permits, one more SSD on RAID1 (Win7 based OS RAID). IF budget doesnt, then any 500gb HDD with day end backups. Cabinet - Considering temperature in jalgaon, it goes around 48-50 deg in summers + 8-9 hours of power cut so needs good ventilation & fans, if any should be silent & of course should not dig hole in pocket. SMPS - Dont have much idea on it. But suggest based on fact that I plan to keep this server up 24x7, should not be noisy. Thin clients Atom based 512mb ram 512mb IDE DOM ITX cabinet DC-DC smps (pls throw some light on this as never used it - primary reason is power saving) SUSE Linux to use terminal services. No native use of this pc. I have thought of finalizing this one Apart from this, i have 2 ideas for software: 1. Install Win7 on server & directly access it thru RDP in suse linux. Pros - Easy installation. Cons - For ODIN, i need each client to use it on different PC bcoz if ODIN is used by 3 users all of them technically use it on same PC but different RDP session & when we close ODIN, it takes auto backup which gets over written when all 3 of them will close. Though this is not of top priority but still if can be solved then good. or 2. Install VMWARE ISX on server & make 5-7 virtual pcs & access them thru RDP in suse linux. Pros - Each thin client will use different VM. Cons - Installation seems to be difficult. Never used it. Would be happy if someone can shed light on it. One more option is, in Case no. 1, can install win server 2008 on server & install VMWARE Workstation & then make 5-7 Win7 based VMs but not sure if it can give sufficient performance or not. I need as good as native pc performance on thin clients. Hope to get some inputs from gurus. Mods can make it a new post if required as this is a kind of combination which many small offices can use & save lot of power, especially in maharashtra where there are lot of power cuts. In this combination, my thinking is, if i use Server + 7 thin clients, i will require not more than 700-800 watts of power. Where as, if i just use 7 full fledged PCs, then it will consume around 1500 watts. (all watts are including 25watts for LCD Monitor)

^^^ Good that I had installed Win7 64BIT along with UBUNTU before hand.. Will try ur suggestions.. I opted for UBUNTU desktop as was not able to setup Server. Its setup was not GUI & I cud not understand it properly so i skipped.. Will post my experience..

Finally I have marched ahead in my experiment & below are my findings... System config: Core i3 with Intel P55TC board (it is 1k costlier than gigabyte but has dual display which i needed) - 9700/- Kingston 1333mhz DDR3 RAM 2gbx2 - 3900/- Intex Cabinet - 500/- Coolermaster 400w power supply - 2000/- (its really silent) DVD Writer LG - 950/- 500gb Seagate - 1850/- (bought 2 months back) 1. Installed ubuntu 64bit desktop edition. (Tried server edition but seems its setup is not gui so i didnt take much efforts & settled down for desktop) 2. Installed Virtual Box OSE thru ubuntu software manager. 3. Installed Win 7 on 1 of the VM created with 800mb ram & 20gb hdd. 4. Setup was breeze & infact win 7 ran smoothly with all my softwares. Could even access this win7 from other pcs on network thru RDP which is the main thing i needed. Even that was breeze. 5. Cloned VDI of this VM just by making its one more copy & changed it UID thru "vboxmanage internalcommands" command in windows. Actually since i m a noob for linux, i was not able to run terminal in virtualbox folder in linux so copied vdi in windows, mades its copy there & changed its UID & re-copied in linux & then made a new VM with HDD as this new cloned VDI. 6. 2nd VM also started (1st was shut down). I changed its PC name & other conflicting parameters & then started both of them together. Still no issues. 7. Did this for 3rd & 4th too. Till 3rd, it was going smoothly with 80% ram utilisation. Once started 4th, 95% ram was utilised & it seemed that I had raped the system. Even the mouse pointer would not move as max ram was used by these 4 pcs & nothing was remaining for host pc resources. Ultimately i had to restart the pc. 8. I modified ram to 600mb for all the pcs & restarted all the 4 simultaneously. Now all 4 pcs were running perfectly with ram utilisation of 80%. Now, main stress test would be to put all this 4 pcs to use by my staff for routine work & will do it on monday. These would be accessed by RDP. Seems I can settle down to this system. Also, I have 2 ram slots free so that I can upgrade to 4gb more if required. I have some doubts & m sure my gurus will have the answer. 1. Even when RAM utilisation was 80-90% CPU utilisation was hardly 15-20%. Why this happens?? Is it because I just started this 4VMs but didnt do any work on them. Infact, I never even heard CPU fam's speed getting increased due to load. It was calm at around 1-1.5k rpm. 2. If there is so much unutilised power in CPU, then I can even upgrade the RAM to max supported of 16gb & run around 10-11 Pcs with 1 GB ram each. In that case, will processor be raped?? 3. In above system, are there any modification required like change of OS or change of VM software to vmware or esxi or xen or any other thing which can give even better performance?? 4. I have to buy one more such pc for my single use. So, should i opt for core i5 for this server & put core i3 in my system?? I mean increasing cpu capacity will make any visible difference?? if not, then even my I will go with i3. Once I am comfortable with this setting, I will continue with this & for accessing this VMs thru RDP, I have my existing ncomputing setup which as of now is being used for all the work but as i said in my earlier posts, i need seperate pcs for all the staff due to multiple instance issues of odin n other softwares so this virtual thing. One more possibility is instead of accessing these pcs thru RDP, I can install ncomputing in this system itself in ubuntu (if i find the drivers.. havent checked yet) & once linux is loaded immedly staff can start their own VM. Hope my experiment is helpful to others & I would be glad to answer queries to any other members wanting to implement this. Also, gurus, thanks for ur support till now & expecting same in future.

Just got info from my friend who is samsung distributor here... EPIC is coming to india in couple of weeks officially with TATA/Reliance at price as low as 17-19k... Is it true?? Also check this link here... http://www.gadget18.com/mobiles/samsung-epic-4g-india-price/ If this is true, then lets hope to get LEGAL & EASY way to get CDMA smartphone with EVDO...

:angry: Diwali offer is no more there............. only 2 offers... 10% & 15% discount on future purchases... bad... But.. good.. i ordered 3 things... now waiting for 2gb pen drive, 250gb hitachi external hdd & 4gb ipod shuffle.. I suggest people to try coupon codes of diwali scheme n see if they are getting free gifts if they r lucky....

Hey friends... if you check this link now, http://pages.ebay.in/diwali/ for purchase above 19999/- ebay has changed ipod shuffle from 4gb to 2gb. In parins post, it is ipod shuffle 4gb & code is XXXX10 & now on site it is XXXX13. Seems ebay has received great response... Now, best part is, even XXXX10 is working & gift name is ipod shuffle 4gb. I did order one samsung laptop worth 24.5k & applied XXXX10. Other people do note this & apply 10 instead of 13 & get 2 more gb :-)

If you print atleast 2-3 pages every 8-10 days, it wont give you any problem... For me, I use it to even photocopy so printing is there every 2-3 days. One more thing... You can check for epson inkjet mfp. Those are best compatible with CISS. I have my friends using them for years & just filling ink in the tanks. Just search CISS in ebay.in you will get supported models. Seller inkshop is really reliable n helpful & product quality is excellent.

I am using Canon MP258. It is very good inkjet based MFP. Plus, I have installed CISS ink tanks to it. Works very good. I have bought CISS from ebay thru seller inkshop (kolkatta based). MFP Cost : 3200/- 6 months back.

Hi friends.. I got a second change offer for a Acer laptop on ebay.. Below are the specs.. I need suggestions from gurus abt shud I go for it or not. Plus 2gb ipod shuffle or hitachi 250gb external hdd adds icing on the cake.. Brand New Acer Travelmate 5720 (CORE2DUO/ 2Gb Ram/ 320Gb HARD DISK) with one year International Travellers Warranty. Other specifications are, Intel Core 2 Duo Processor T7300 2.2GHz speed 4MB L2 cache 15.4" WXGA Widescreen LCD Display 2GB DDR2 RAM (Expandable upto 4GB) Integrated Intel Graphics Media Accelerator X3100 Crystal Eye Webcam 320GB 5400RPM SATA Hard Drive 8X DVD +/- dual layer recorder 53 watt-hour 6-cell battery (Around 3 hours or more battery backup) 802.11 a/b/g WLAN (WiFi) Bluetooth 1 IEEE 1394 (FireWire port); 4 Universal Serial Bus (USB 2.0 ports); 5-in-1 memory card reader; VGA monitor out port; S-Video out; RJ-45 Ethernet LAN; RJ-11 modem; PC card slot; ExpressCard 54mm; headphone/speaker jack; microphone; This item includes, 1 Acer travelmate 5720 with above specifications 1 New Carry case International Travellers Warranty Kit User Manual Driver CD Operating System Of your choice. (Please mention the operating system you prefer. If you don't mention, Windows XP will be given by default)