InfoGeek

It was the faulty serial cable. Don't know why it was replying fine to the modem commands but upon connection it wouldn't transfer any data and the remote comupter would hang up. May the send/recv pin was damaged. Anyways, I got a new serial cable for only Rs. 50. So, yay!

Hi everybody, I'm facing this strange problem with R Connect. I'm getting the following errors: But when I use the Modem diagnostics and use the "Query Modem" function. I displays the responses as ok. Here's the log file. 05-19-2006 13:39:43.453 - Send: ATH<cr> 05-19-2006 13:39:43.453 - Recv: <cr><lf>OK<cr><lf> 05-19-2006 13:39:43.453 - Interpreted response: OK 05-19-2006 13:39:43.453 - 115200,8,N,1, ctsfl=1, rtsctl=2 05-19-2006 13:39:43.453 - Initializing modem. 05-19-2006 13:39:43.453 - DSR is low while initializing the modem. Verify modem is turned on. 05-19-2006 13:39:43.468 - Send: AT<cr> 05-19-2006 13:39:43.468 - Recv: <cr><lf>OK<cr><lf> 05-19-2006 13:39:43.468 - Interpreted response: OK 05-19-2006 13:39:43.484 - Send: ATE0V1<cr> 05-19-2006 13:39:43.484 - Recv: <cr><lf>OK<cr><lf> 05-19-2006 13:39:43.484 - Interpreted response: OK 05-19-2006 13:39:43.500 - Send: AT<cr> 05-19-2006 13:39:43.500 - Recv: <cr><lf>OK<cr><lf> 05-19-2006 13:39:43.500 - Interpreted response: OK 05-19-2006 13:39:43.500 - Sending user initialization commands. 05-19-2006 13:39:43.515 - Send: AT+CRM=1;$LGPKT=3<cr> 05-19-2006 13:39:43.578 - Recv: <cr><lf>OK<cr><lf> 05-19-2006 13:39:43.578 - Interpreted response: OK 05-19-2006 13:39:43.578 - Waiting for a call. 05-19-2006 13:39:43.593 - Send: ATS0=0<cr> 05-19-2006 13:39:43.593 - Recv: <cr><lf>OK<cr><lf> 05-19-2006 13:39:43.593 - Interpreted response: OK 05-19-2006 13:39:43.593 - TSP(0000): LINEEVENT: LINECALLSTATE_IDLE 05-19-2006 13:39:43.593 - TSP Completing Async Operation(0x000102b5) Status 0x00000000 [b]05-19-2006 13:39:43.593 - TSP(0000): Closing Call[/b] 05-19-2006 13:39:43.593 - Session Statistics: 05-19-2006 13:39:43.593 - Reads : 30 bytes 05-19-2006 13:39:43.593 - Writes: 38 bytes everything seems Ok except the closing call message. Why the server closes my connection? I contacted CC and registered a complaint but they are saying that there may be a problem with my phone or my serial cable. But I don't think that's the case as the modem is responding to the AT commands. I asked the CC if there was a connetivity problem in my area but they said no there is no problem in my area. What you guys think can be the problem? and should I send an e-mail to the chairman's office regarding this problem.( I think the e-mail ID is anil.ambani@relianceinfo.com)

This month I used more 420 SMSs and was charged for 220 SMSs. That means I'm getting 200 Free SMS. I don't know why others are getting just 100.

Here's my usage and discount as cut out from my bill.

It's still showing 0 MB for me.

This month again i used 127 SMSs but wasn't charged for the excess number of SMS. Hurray!

I'm not under the freedom@night plan instead the old freedom plan.

Hi all, I'm a freedom plan subscriber. And as mentioned in the plan i get 100 free SMS/month. Earlier, i never used more than 100 but Last month i used about 195. But i wasn't charged for the 95 excess SMSs. Has reliance changed the plan. If yes, then how many free SMSs one gets in this plan?

Can it send sms to Reliance FWP as well?

Solved I was using R Connect on my Red Hat 9 installation since morning. I just thought let's give it one more try on Win XP and rebooted in XP. I tried to connect and It got connect. I'm clueless as to what was wrong. But now it's working fine. May be some problem with reliance network. But then it should give some other error and not Hardware failure in modem. It was even refusing to dial. Anyways the problem is sorted for now. Don't know for how long it will work?

Hi Rajan What kind of information you want? Let me know and i'll post it here.

I've not changed anything since it was working. Phone is connected to the same COM1 port. Nothing changed. One thing that I'm suspecting is that some other process may be using the Com port and when i try to dial through it, it finds it busy and displays the error message. I tried to figure out what other process may be using the com port but with no luck.

Here's some more info. When i open the Device Manager and choose the properties of modem and then click Query Modem. It displays the following: Command Response ATQ0V1E0 Success AT+GMM +GMM:LSP-340 AT+FCLASS=? 0,2.0 AT#CLS=? Success AT+GCI? COMMAND NOT SUPPORTED ATI1 Success ATI2 Success ATI3 Success ATI4 Success ATI5 Success ATI6 Success ATI7 Success Also the log file is: 10-31-2005 11:21:21.281 - File: C:\WINDOWS\system32\tapisrv.dll, Version 5.1.2600 10-31-2005 11:21:21.281 - File: C:\WINDOWS\system32\unimdm.tsp, Version 5.1.2600 10-31-2005 11:21:21.281 - File: C:\WINDOWS\system32\unimdmat.dll, Version 5.1.2600 10-31-2005 11:21:21.281 - File: C:\WINDOWS\system32\uniplat.dll, Version 5.1.2600 10-31-2005 11:21:21.281 - File: C:\WINDOWS\system32\drivers\modem.sys, Version 5.1.2600 10-31-2005 11:21:21.281 - File: C:\WINDOWS\system32\modemui.dll, Version 5.1.2600 10-31-2005 11:21:21.281 - File: C:\WINDOWS\system32\mdminst.dll, Version 5.1.2600 10-31-2005 11:21:21.281 - Modem type: Standard 19200 bps Modem 10-31-2005 11:21:21.281 - Modem inf path: mdmgen.inf 10-31-2005 11:21:21.281 - Modem inf section: Gen192 10-31-2005 11:21:21.281 - Matching hardware ID: mdmgen192 10-31-2005 11:21:21.281 - 115200,8,N,1, ctsfl=1, rtsctl=2 10-31-2005 11:21:21.281 - Initializing modem. 10-31-2005 11:21:21.281 - DSR is low while initializing the modem. Verify modem is turned on. 10-31-2005 11:21:21.281 - CTS is low while initializing modem. 10-31-2005 11:21:21.296 - Send: AT<cr> 10-31-2005 11:21:23.296 - Timed out waiting for response from modem 10-31-2005 11:21:23.296 - The modem failed to respond to the initialization command, Retrying one more time 10-31-2005 11:21:23.296 - 115200,8,N,1, ctsfl=1, rtsctl=2 10-31-2005 11:21:23.296 - DSR is low while initializing the modem. Verify modem is turned on. 10-31-2005 11:21:23.296 - CTS is low while initializing modem. 10-31-2005 11:21:23.296 - Failed to send command because of WriteFile() Failure, Error=000003e3. 10-31-2005 11:21:23.312 - Send: AT<cr> 10-31-2005 11:21:25.312 - Timed out waiting for response from modem 10-31-2005 11:21:25.312 - The modem failed to respond to the initialization command, Retrying one more time 10-31-2005 11:21:25.312 - 115200,8,N,1, ctsfl=1, rtsctl=2 10-31-2005 11:21:25.312 - DSR is low while initializing the modem. Verify modem is turned on. 10-31-2005 11:21:25.312 - CTS is low while initializing modem. 10-31-2005 11:21:25.312 - Failed to send command because of WriteFile() Failure, Error=000003e3. 10-31-2005 11:21:25.328 - Send: AT<cr> 10-31-2005 11:21:27.328 - Timed out waiting for response from modem 10-31-2005 11:21:27.328 - Failed to send command because of WriteFile() Failure, Error=000003e3. 10-31-2005 11:21:27.328 - Session Statistics: 10-31-2005 11:21:27.328 - Reads : 0 bytes 10-31-2005 11:21:27.328 - Writes: 0 bytes ATQ0V1E0 - ? AT+GMM - +GMM: LSP-340 AT+FCLASS=? - 0,2.0 AT#CLS=? - OK AT+GCI? - COMMAND NOT SUPPORTED AT+GCI=? - COMMAND NOT SUPPORTED ATI1 - OK ATI2 - OK ATI3 - OK ATI4 - OK ATI5 - OK ATI6 - OK ATI7 - OK

My phone is connected through serial port at COM1. And also, I've tried unplugging and plugging again. But it doesn't work out.

Hi everybody I have this strange problem. I've LG LSP-340E FWP phone. I was able to connect to the internet till yesterday. But when i started my computer today, and tried to connect, Windows displayed a message "Error 0692: There was a hardware failure in your modem.". I deleted the connection and uninstalled the modem drivers. I tried reintalling from the R Connect CD but it didn't detect my modem at the setup. I don't know what's wrong. I've Red Hat 9 on other partition(dual boot) and it's working fine in that. I don't have a clue why it's happening. Any ideas would be appreciated.