axiprash

Data not working on Marathon M 5. cdma. Can any one post the required settngs... for cdma. Used :net & net Used : mobile no Then too not workibg. Please help

Yes it will using htc one Sprint. Flashed the latest RUU 4.4.2 of sprint but the data is not working call & text are working smooth. any solution... Please assist when going in Settings>> More>>Data USage>> Mobile Data : CHECK turning on... for a min or 2 then it comes disconnected. Network Mode 1. CDMA Only 2. LTE/CDMA Both tried but failing to conncet the data. HSD is activated already... also it has been deactivated and reactivated... DATA WOrks in other mobile but not in HTC ONE M7 Please guide

Yes of course, I am myself using a small note 2, voice, data, sms all working flawlessly. Sent from my SCH-R950 using Tapatalk 2 need help for DATA to Work. As i am using NOTE II Verizon.. Purchased forma Vendor.. all working fine... but not DATA. Can you Please Help

Dear i flashed the 4.4.4. to My MOTO G. everything is working fine... but not the DATA.. Data in not working/starting... Also i set the MObile Main Setting > DS QxMIP - to - Simple IP Then too data not working.. As prvs it was working like a charm... Any idea... Thank you, Prashant

ask Reliance to Remove the Number from your handset make handset blank... in Short Release the Handset from Your Number... TAke your Number on SIM.... Later Ask them Again to Put the Other Number On the Same MEID/HANDSET prior 2 days ... You will get the MIN Number Back.. ([{ I tried other Number.... <as i got MIN> you can also ask to Put the Same Number and Give a TRY... when i asked Reliance Store to Remove the my Number and re-insert/flash same number Again then they did as SAID. But Nothing Worked for ME...(as might the time SPAN was vin SECS/MINs so it might had not worked) WHat Worked is OTHER Number.. also FLASHING OTHER Number you NEED to KEEP THE MEID BLANK for more than 1 day... HURRY Messes the THINGS ... So you need to Give TIME & Most important Have Patience :-) bEsT LuCk }]) This is what i did and got a worth lesson...

I too had same problem... Do one thing you need to reset the DIAG by default to ENABLED. just GO to Bootloader Select BPTools (VOL Up+) now ur phone will restart in, by default DIAG Enabled... So enjoy... oPeN DFS / NV WRITER.... send SPC 000000 or PRVS one whichever u have initially Program... Success... :-) Thank you a lot for help...

Drivers for all MOTO G are same, no need for new drivers, you should have Reliance PRL and DATA dump for your phone's meid. Nothing more is required. Just did this two days back, your phone will be rebooting from Home screen or after few min of full boot. This is due to Radio / Modem, I was on same stage while downgrading. even if you install custom rom it will do same. (reboot) you need to flash 4.4.4 modem partition on this. download this partition table updater file :- https://s.basketbuild.com/filedl/devs?dev=SuperR&dl=SuperR/Motorola/falcon/falcon_KXB21.14-L1.57_partition_updater_2.zip put phone in Recovery [twrp] Push this zip file to /sdcard/ , or if you are luck you can get MTP drive for sufficient time. just copy it to phone. Flash using TWRP 2.7.0.0 Or Download this rar file, https://www.dropbox.com/s/5vpu1uj15j48v6x/Boost_4.4.4_390.81.01P.rar?dl=0 which content radio dump from 4.4.4 Extract IMG file and push it to /sdcard/ then using DD command in adb shell you can restore radio partition. ADB shell will work in recovery , you need TWRP 2.7.0.0 for that. here is command for DD from ADB shell. dd if=/sdcard/radio_firmware.img of=/dev/block/platform/msm_sdcc.1/by-name/modem tried the 1st PArt Said [before "OR"] was not on TWRP 2.7.0.0... SO got to Downloaded it from a link "http://crackflasher.com/twrp-2-7-0-0-falcon-img-moto-g-dhacker29/" (phone was not starting... in that case had to Sideload) TWRP>ADVANCED>ADB Sideload on computer/Notebook/ type -> adb sideload <file_name> the contents will be copied to tmp folder & will be renamed as sideload.zip | V tried by Sideload... Just copied the zip to sideload and was stored in the /tmp/ & was able to flash the ZIP but error flashes... ON PC ------------ then copied all the files in Fastboot folder where all adb n fastboot files are present.. RUN Script : <before running below script, extract all contents of current zip file uploaded by Hitesh sir and place/overwrite over prvs one...> SET fastboot=fastboot.exe %fastboot% flash partition gpt.bin ' this is where u will get success %fastboot% reboot-bootloader %fastboot% flash logo logo.bin %fastboot% flash boot boot.img %fastboot% flash recovery recovery.img %fastboot% flash system system.img_sparsechunk1 %fastboot% flash system system.img_sparsechunk2 %fastboot% flash system system.img_sparsechunk3 %fastboot% flash modem NON-HLOS.bin %fastboot% erase modemst1 %fastboot% erase modemst2 %fastboot% flash fsg fsg.mbn %fastboot% erase cache %fastboot% erase userdata pause here then u will get the Phone started for few mins say 1-2 mins... then immd you copy the original file Uploaded by hitesh Sir [before 'or'] {falcon_KXB21.14-L1.57_partition_updater_2} and copy to you Device then again come to TWRP 2.7.0.0 and flash ... "falcon_KXB21.14-L1.57_partition_updater_2" installation/flashing goes smooth. (PLEASE NOTE: after flashing the above code the stock recovery is been flashed, so do FLASH CUSTOME RECOVERY Again :-) ) Phone got a SOUL- A Life... all credits goes to Hitesh Sir... I just shared my Experience.. HITesh @ what i observed is Change of MIN Number...??? Can you please clarify it, if known??? thank you, Prashant No Network.. should flash PRL... but DIAG DISABLED also the SPC/MSL is not working... by default the DIAG Mode is Disabled.. when tried to enable the SPC : 000000 PRvsly set. is not working .. when read the Phone SPC / MSL it Prompeted to Nothing"NULL" and a SPACE " " or Blank was seen on the Read Status MSL utility Phone is ON ... but not SIgnal (as PRL needs to be Written) Please Assist

Dear Friends, I had updated MOTO G Boost to Kitkat 4.4.4. I had to Downgrade it. So i downloaded and flashed " falcon_boost_user_4.3_14.10.0Q3.X-84-9_11_release-keys-cid9.xml " When was flashing the above Script i had only on error, and rest all succeeded The Error WAS as follows : " C:\Users\Notebook\Desktop\fastboot>fastboot flash partion gpt.bin target reported max download size of 536870912 bytes sending 'partion' (32 KB)... OKAY [ 0.034s] writing 'partion'... (bootloader) Permission denied FAILED (remote failure) finished. total time: 0.058s " where as on Screen(Device) cmd: getvar:partion-type:partion cmd: getvar:max-download-size cmd: :Download:00008000 cmd: :flash:partion and now the phone is rebooting... and rebooting and rebooting in interval of 1-2 min in meanwhile it says Statring Service..... and again reboots.. NOTE : the Devie is UNLOCKED. Status Code:3 Please guide May i have the Solution for this...

can you let me that the Device HTC ONE is USED or NEW... the clarification i require is that the "Mobile Sharing Option" is Enable/visible if its Previously activated on Sprint. if its new then the "Mobile Sharing Option" is not Enabled/ not visible. Thank you,

Succeeded (till now only for GSM) [CDMA Part .. work in Progress]

its not the HW problem. the problem is of SW issue. What Sprint has done is, in their latest Builds and devices, they had code as if the handset is bricked in term to UNLOCK the device they have stopped the EXCHANGE OF VOICES.. but if you check the HW diag tool test which is build in the Phone it works fine all the test are succeed only Live test call is not working,,.. just flash the OLD RUU, Problem will get Solved but when it i wil stop exchange of voice, cant say. Please do Post if exact problem is detected and the solution for it... till then Keep Flashing OLD RUU SOlution GOt.. for not EXCHANGE of Voices... Dear frnds.. got to link.. OP http://forum.xda-developers.com/showthread.php?p=53407966 you will find all answers 1). YOu should be S-OFF 2). Recovery (any will do) 3) 1.01.20.0515_radio download from the above link and 4) flash the 1.01.20.0515_radio thru recovery Done Voice Exchange will be there... [ONLY FOR GSM...] (CDMA dosent work... it suits only to OTHER BASEBAND 0515: ) Please try and share and ENjOY !!!

i too have same problem... not able to detect the Problem.. i tried to flash the JB 3.04.XX.XX version it worked fine.. but not bale to get the Things y EXCHANGE OF VOICE IS not there.. anyways if again problem comes then reflash the RUU. thats all if anyonw finds exact answer then please do post and share yeah its true...

how can i find a DEC aKey of the phone HTC EVO 4G.. i don't have box

Works fine for HTC ONE MAX - Sprint ... only need to change the model id modelid: 0P3P70000 No other changes are to made. & save... other things are in OP Follow the steps in OP

i am trying ot for the ONE MAX - Sprint. but i am getting error... can you resolve.. or is there any other zip file for CDMA working on ONE MAX - SPrint. Currently using GSM on the ONE MAX. ---->Rooted. S-OFF getting following error C:\Users\Notebook\Desktop\fastboot>fastboot reboot rebooting... finished. total time: 0.044s C:\Users\Notebook\Desktop\fastboot>to_boo 'to_boo' is not recognized as an internal or external command, operable program or batch file. C:\Users\Notebook\Desktop\fastboot>to_bootloader.bat C:\Users\Notebook\Desktop\fastboot>adb reboot-bootloader C:\Users\Notebook\Desktop\fastboot>fastboot oem rebootRUU ... (bootloader) Start Verify: 0 OKAY [ 0.049s] finished. total time: 0.051s C:\Users\Notebook\Desktop\fastboot>fastboot flash zip CT3G_radio.zip target reported max download size of 1554694144 bytes sending 'zip' (18824 KB)... OKAY [ 2.367s] writing 'zip'... (bootloader) zip header checking... (bootloader) zip info parsing... (bootloader) checking model ID... FAILED (remote: 41 model id check fail) finished. total time: 5.327s C:\Users\Notebook\Desktop\fastboot>