Captain Minus

Dear Friends, Just to inform you that i had given my v9m for second repair. and since it came it is working fine now i dont face in network hang on my mobile now any one can reach me without anyproblem. if any one of you facing the same problem in which people cant reach you irrespective of the signal strength on your phone showing good please take it to service center and tell them about the problem they will certainly help you. regards capt. minus

Dear All, As i alsready told that iam also facing problem with this v9m handset. my callers are unable to reach me irrespect of full singnal strength/. i spoke to relaince ccust care techincal helpdesk, they told me they are getting this kinds of complaint. some times if the phone is idle it gets hanged in network even though the network strength is full but u will not recive any phone until and unless you 1) Restart The phone or 2) make a outgoing call so as to break the idle & network hang after that phone will again become active with network. I gave my phone to motorola service center with the same problem. I got it after 12 days and they work done says they checked the capacitor and reflowed it or so....but again iam facing the same problem....i will take it back to them..........and let you know.............. regards Capt. Minus

hope u have selected "Other CDMA phone " in phone list.... and a correct COM port dear bro did your problem got solved? sorry for late reply.. u have to click on file system to veiw content. regards

hope u have selected "Other CDMA phone " in phone list.... and a correct COM port

I was Facing the same problem. I got my handset replaced from the dealer. The New Handset worked fine for Only One Day. and Now again the Same Problem. Now the dealer says... this may be probably Reliance Service Problem... Please let me know if you get some clue to takle this problem. My Mail id is meghaniravi@hotmail.com I do agree with you. even iam facing the problem when somebody tries to call me they get short beeps and latter it says unavailable..irrespect of the phone is showing the full signals...

Dear sir, You are wellcome. sorry that was a typing mistake. i bought this phone 18.7 as nobody had this phone except the web word. so had no choice . regards

dear sir, load this default thing back everything will be fine..

hi, try by OVERWRITING it rather than deleting and changing the file name. use the default file name i.e., rim_cli.gif

ye siam totally agree with abc2005. i faced the same problem whil installing diego 3.09, just removed ur newer version of cable driver..and let diego to install his own.. once done u can again downlaod the latest version of cable driver from nokia.co.in its just 800KB or so. and install teh latest version coz after installing diego's cable driver my comp was unable to detect my nokia 6275. so i have to download the latest version after that everythingw as fine.. plus you have to run a patch also.. to crack 3.09 regards Nokia_Diego_3.09_Crack.exe

sir according to the source.. the file shld be at the same place. may its has some other file name... Krzr K1M (Verizon firmware) - External Graphic when Flip open -> /mobile/verizon.gif... 96x80 8Bit (256 color) gif - Startup Sound -> /motorola/system/ui_start_up_mono.mp_ is a 4 second 128kbit/44khz/Stereo mp3, renamed to .mp_ - Shutdown Sound -> /motorola/system/ui_start_dn_mono.mp_ is a 2 second 128kbit/44khz/Mono mp3, renamed to .mp_ - Startup Picture -> /motorola/shared/picture/customer_opening.gif is an Animated 176x220 32bit non-interlaced Gif89a, 23 Frames - Shutdown picture -> /motorola/shared/picture/customer_closing.gif is an Animated 176x220 32bit non-interlaced Gif89a, 14 Frames regards

Dear Members, This may be my first thread in rimweb. I find this forum very usefull. I want to share the above thing with you. Most of you may be aware of this but for me this was nothing less than a discovery. I just bought this V9m for 19.8k from web world. But however i didnt liked the company logo on the LCD when it is open. plus the start and shutdown sequence was irritating me so i decided to do some changes internally. so iam goining to share that with you. You require 1. Phone V9m 2. Data Cable(shipped with it.) 3. BitPim installer http://bitpim.org/ use the latest version you have to configure BitPim before this you have to install phone driver(which you may have done when installing MPT) for checking wheather drivers are correctly installed go to device manager and under Modems check if you can see " Motorola USB Modem" and under USB Controllers "Motorola USB composite device" Since the V9M is NOT natively supported in Bitpim, the Autodetect feature will fail to find the phone. So manually configure it... Do this by clicking Settings from the Edit pull down menu. Use the Phone Type Box to select "Other CDMA phone" Even if you know the "com port" DO NOT manually set it. Instead, click the Browse button to the right of the Com Port box A Choose Com Port window will pop-upscan ports. It will have 3 "sections" listing Available Ports, Ports Not Available, and Inoperable Ports Select "Motorola USB Modem " from the listing of Available Ports and Click OK. The BitPim settings window show now reflect your phone choice and com port... Making use of the File System feature of BitPim... For ALL PHONES... even those not NATIVELY Supported.... You can make use of the File System "tab" to copy files back to your PC, over write them, and in some cases, even ADD files or folders to the phone... Right Click and get a pop-up menu with actions... Use the VIEW pull down menu and select File System BitPim will now have a File System icon along the left. Click on it In the center column, Click the + next to the folder to expand the listing. Now time for action:- V9M (Verizon firmware) - External Graphic when Flip open -> /mobile/rim_cli.gif... 240x320x8bit (256 color) gif - Startup Sound -> /motorola/system/ui_start_up_mono.mp_ is a 128kbit/44khz/Stereo mp3, renamed to .mp_ (u wont find this file, as the shutdown is used for startup also) - Shutdown Sound -> /motorola/system/ui_start_dn_mono.mp_ is a 128kbit/44khz/Mono mp3, renamed to .mp_ - Startup Picture -> /motorola/system/customer_opening.gif is an Animated 240x320 32bit non-interlaced Gif89a, 17 Frames - Shutdown picture -> /motorola/system/customer_closing.gif is an Animated 240x320 32bit non-interlaced Gif89a, 14 frames you can delete the shutdown tone plus the customr openg and clsing file. This will make your phone start and shutdown fast. put any pic of ur choice 240x320 in the place of rim_cli.gif you will get plenty on net or put of ur own(who cares) regards Capt. Minus p.s. any queries can be sent to me on my email. Source : WWW