Search the Community

Read more at: http://economictimes.indiatimes.com/news/company/corporate-trends/n-chandrasekaran-looks-to-cut-off-tata-tele-connection/articleshow/60523772.cms

Hello Everyone , I am experiencing hassle in setting up internet connection on my Phone ZTE NSource. It was earlier working fine with Tata Internet with EVDO. I have bought this Phone recently. But as my home is in UP and I study here in Delhi. I had to switch the networks Tata to Rel and vice versa. So, as it was working fine with Tata earlier but now I tried to set it up for Reliance. Now even Tata in not working and also facing issue like the networks are going in and out again and again networks do not sustain. Tried to take help from the google but no help. Please help me in setting up my phone to Tata internet again and if knowledge of Reliance is also given it would be a huge plus. It would be my extreme pleasure if I can get my Phone running back as it was. After trying the same for last 10 days I have got some knowledge about QPST, DFS, CDMA Wares Workshop. And ready to learn something else if there. I will be able to do any steps instructed. However, do not know the meaning of the fields. ex. NV I do not know but the mode has to be set to NV for setting internet settings and then backing it up to RUIM (Removable User Identification Module) other terms like NAI, PAP, PPP, etc Also Attached the Screenshots where the settings that are needed to be done and I have some confusion what to put in all these blocks. Please let me know the settings needed to be done from the beginning that are to be done. Like if any other settings are also be done please let me know. This forum is my last hope. As I also contacted seller, Customer care but no help. Thank You! Regards Rohit

As per the Android Police article here: http://www.androidpolice.com/2015/09/29/nexus-5x-vs-nexus-6p-differences-help-decide-one-pick/ CDMA connectivity on Nexus 6P will be avaliable for US as well as International variant (which we'll get officially in India). Nexus 6P (international version): GSM/EDGE: 850/900/1800/1900MHz UMTS/WCDMA: B1/2/4/5/6/8/9/19 TD-SCDMA: 34/39 CDMA: BC0/1 LTE (FDD): B1/2/3/4/5/7/8/9/17/19/20/28 LTE (TDD): B38/B39/40/41 CA DL: B1-B5, B1-B8, B1-B19, B3-B3, B3-B5, B3-B7, B3-B8, B3-B19, B3-B20, B3-B28, B5-B7, B7-B7, B7-B20, B7-B28, B39-B39, B40-B40, B41-B41 Nexus 6P (US version): GSM/EDGE: 850/900/1800/1900MHz UMTS/WCDMA: B1/2/4/5/8 CDMA: BC0/1/10 LTE (FDD): B2/3/4/5/7/12/13/17/25/26/29/30 LTE (TDD): B41 CA DL: B2-B2, B2-B4, B2-B5, B2-B12, B2-B13, B2-B17, B2-B29, B4-B4, B4-B5, B4-B13, B4-B17, B4-B29, B41-B41 No details whether it would be SIM or non-SIM based. But I bet it would be both MEID (non-SIM) + RUIM enabled like we have for Moto E (2nd Gen.) LTE Moment of rejoice for Reliance and other CDMA users out there! Edit: Typo corrected

Hi, I have recently got an imported 9930 Verizon (GSM Uncloked) handset. Got hold of a techie to load PRL (I guess using CDMA workshop) and registered ESN with tata, unfortunately he didn't do a good job. I couldn't activate using *228 (OTA), it throwing some error. But some how VOICE calls are working and SMS (receiving SMS but not able to send SMS). Initially they (TATA team, & Techie) both promised that BIS will be activated but now they are giving some lame reasons to activate. On other TATA Blackberry helpdesk is trying to register my MEID from past three weeks and failed to activate it. Yet they are giving some excuses that their IT team is working on the problem. How to fix BIS activation?? Should I hard reset my device to register this MEID with Reliance (because initially before PRL load *228 was able reach Reliance) - After PRL loading I can't hear Reliance / either Tata - It's just saying Welcome thank you for using our services Is there a fix for OTA to reach Tata? Or Can I switch other Service provider (GSM) and use Engg screen options to activate BIS - Is it really possible?? What is A-Key on CDMA Screen? How to get it? Would it help in any way to fix this issue?? ##000000 - Is showing some verizon related info. Can I get similar info for TATA . Would it help?? MSL (from service provider)—??? MDN (from service provider)—?? IMSI_S (from service provider) - ?? SIP-ID (from service provider)—?? SIP-Password (from service provider)—?? MIP-ID (from service provider)—?? MIP-Password (from service provider)—?? SID (from modem card)—?? NID (from modem card)—?? DMU MN Auth- ?? Primary HA Address?? Secondary HA Address?? Thanks in advance for your help....!

Verizon's Novatel, ZTE and Pantech pocket routers are very popular in US. Initially, Novatel 2200 Jetpacks were based on NV mode programming only. Now the newer Novatel 4510, 4620L, 4620LE and 5510 are based on CDMA SIM slots. The ZTE 890L and Novatel 4620L/LE are global mode MiFi devices where any GSM SIM will work on the go. While Reliance 1x works instantly upon SIM insertion, Evdo does not connect and needs to be tweaked a little. And data on Tata Indicom does not work without these tweaks. Requirements for Reliance CDMA EVDO on SIM:- 1. We have to know the 8 digit HDR password of the RUIM before begining the process. 2. Download 4620L drivers. 3. Mifi should start installing various ports after installation of the driver 4. Using DFS, connect to status port and send SPC 000000 (the Jetpacks do not listen without this port) 5. Do not read or change any settings 6. Go to data and in HDR UID/Pass write A10000xxx@ in your HDR username, and the RUIM's 8 digit password in the password field. 7. Go to MIP section, without reading write A10000xxx or 'net' in the first profile, same in the RM NAI. 8. Reboot 9. Insert SIM and 3G connected. Requirements and procedure for EVDO on Tata Indicom Photon SIM:- 1. Using DFS, send SPC 000000 and go to MIP profile, enter 'internet' in the first profile and reboot. 2. After this change, any Tata SIM can be used since it has a universal MIP, unlike Reliance. (Any data pack with any denomination works) Note:- This is only for CDMA band of the Mifi. Router configuration is done by wifi by vz.hotspot or . GSM_WCDMA is global auto APN. ZTE 890L is fully unlocked and does not require any tweaking. This tutorial pertains to 4620L, 4620LE and 5510. None tested on MTS. Important update:- For Reliance, universal username/pass = net/net working for evdo on some firmwares and some firmwares need HDR username A1000xxx@hrpd.xxxx in first MIP profile in DFS and nothing else. HDR password is no longer required to work. Mifi4620_Drivers.zip

For this process, HTC One Sprint M7WLS should be rooted and S-off. Google it for the procedure till here. 1. Open your favourite CDMA software and make the RUIM config as RUIM if avail 2. Boot the phone into fastboot and type the following commands a. fastboot oem rebootRUU b. fastboot flash zip CT3G_radio.zip c. fastboot reboot Link for the radio https://drive.google.com/file/d/0BylQ6RZ2mIP_UjBkcWd3T1lITFk/edit?usp=sharing 2. http://www.4shared.com/zip/Wh-_Fvsuce/CT3G_radio.html Your phone will detect CDMA SIM network upon reboot.

Verizon Pantech Breakout is an unlocked CDMA OMH SIM handset where all SIM cards support calls and sms. There is no hidden settings involved in achieving calling and messaging. However it does not support data on RUIM of Reliance but with some minor tweaking, Tata Indicom SIM supports 3G/EVDO internet. Steps:- 1. Root the phone in few steps following this guide and the attached files. http://www.techychat.com/2013/05/28/root-pantech-breakout/ 2. After successful root, download and install root explorer 2.16 or older 3. Replace my attached build.prop in system folder and apns-conf.xml in system/etc folder, set all permissions and reboot. 4. Dial *#*#4636#*#* and select CDMA only Note:- Data on this device only works in evdo areas. there is no 1x support available on this phone. data icon will remain 1x in evdo areas and no data will work in 1x areas. Evdo speed is recorded on this 1x icon. After putting this settings, there will never be any need to change/modify any setting even after changing to any number of SIM cards. Also note that there is no success on Reliance RUIM for data on this phone till date. apns-conf.xml build.zip

Posting this topic to save time while adding different APN'sSettings. So, those who need can just put these settings to access your internet on your smart ANDROID phone To add APN settings Go to Menu> Settings> Wireless & networks. FOR IDEA Now select “Mobile networks” and then “Access Point Names”. Click “Menu” and then “New APN”. Enter Name and APN (below). Leave Username, Password and other entries blank. Save and reboot. For Reliance Name : Reliance Net APN : rcomnet or smartnet Proxy : <Not Set> Port : <Not Set> Username : <Not Set> Password : <Not Set> Server : <Not Set> MMSC : <Not Set> MMS Proxy : <Not Set> MMS Port : <Not Set> MCC : 404 MNC : 013 Authentication type : <Not Set> or PAP APN Type : internet save For VODAFONE Name: Vodafone APN: www save For TATA Name : TATA Internet APN : TATA.DOCOMO.INTERNET Proxy : <Not Set> Port : <Not Set> Username : <Not Set> Password : <Not Set> Server : <Not Set> MMSC : <Not Set> MMS Proxy : <Not Set> MMS Port : <Not Set> MCC : 405 MNC : 025 Authentication type : < Not Set > APN Type : default save For AIRTEL Name: Airtel GPRS APN: airtelgprs.com MCC: 404 MNC: 92 APN type: Default FOR AIRCEL Name : Aircel GPRS APN : aircelgprs Proxy : <Not Set> Port : <Not Set> Username : <Not Set> Password : <Not Set> Server : <Not Set> MMSC : <Not Set> MMS Proxy : <Not Set> MMS Port : <Not Set> MCC : 404 MNC : 17 Authentication type : <Not Set> APN Type : default save For BSNL Name: bsnlnet APN: bsnlnet Proxy: Not set Port: Not set Username: Not set Password: Not set Server: Not set MMSC: Not set MMSC: Proxy Not set MMS port: Not set MCC: 404 MNC: 71 Authent. Type: PAP APN Type: default APN protocol: IPv4 Save For UNINOR Name : GPRS APN : uninor Proxy : 10.58.10.58 Port : 8080 Username : <Not Set> Password : <Not Set> Server : <Not Set> MMSC : http://10.58.2.120 MMS Proxy : 10.58.2.120 MMS Port : 8080 MCC : 405 MNC : 819 Authentication type : <Not Set> APN Type : default, supl,mms Save you can also download this app from store but it contains all worldwide network APN's and we need to search them. Hence the above output is too save time!

Hi all... While searching for packs and plans for TATA DOCOMO CDMA, i realised it is a pain in the a##... The Docomo site is no good and Tata Indicom Website shows plans only for the Delhi Circle.. I chanced upon the latest plans and packs- voice and sms (data plans are already available online so not including them). Though these are for Gujarat Circle, i do not expect there to be much of a difference in other states... Hope it is useful...