Search the Community

The new Nexus 6 is very easy to program. RGERUC and RECRUC068 work out of the box on this device. Data needs simple steps by DFS. Required:- Latest Motorola BP drivers, DFS Not required:- Root, bootloader unlock 1. Boot the phone into BP tools and select port "diag mdm" with no SIM inside and airplane mode turned on. 2. Make RTRE config to RUIM pref and reboot back to BP tools (can make it RUIM only after programming is complete) 3. Write omhxxx in ppp usr and S1912xxx in ppp password 4. Continue in data section in DFS, HDR SCP force AT config= RevA_MFPA HDR SCP force rel 0= Evdo_RevA Hybrid mode=enable Data MDR HSPD mode= MDR only 5. Insert RGERUC SIM and continue programming 5. Enable all six profiles in MIP section and write omhtestxx in all the six fields with MIP=Mobile IP 6. Reboot and enjoy.

Due to a large section of buyers now opting to purchase GSM enabled CDMA device, I add another device for CDMA data provisioning. There are no special requirements to enable CDMA data on VZW G3. Root is not required. This is applicable to those users whose manual APN of #777 does not enable data. 1. From the dialpad, ##PROGRAM985, go to port test, switch it on. Diag mode will be ON. 2. With data enabled SIM inside, using DFS, go to data section and select, evdo_MFPA 3. Enable all the six profiles with omhtest@omh.relianceinfo.com in the MIP section fields and write. 4. May sometimes need to make APN as #777 if data does not start.

Verizon's Novatel, ZTE and Pantech pocket routers are very popular in US. Initially, Novatel 2200 Jetpacks were based on NV mode programming only. Now the newer Novatel 4510, 4620L, 4620LE and 5510 are based on CDMA SIM slots. The ZTE 890L and Novatel 4620L/LE are global mode MiFi devices where any GSM SIM will work on the go. While Reliance 1x works instantly upon SIM insertion, Evdo does not connect and needs to be tweaked a little. And data on Tata Indicom does not work without these tweaks. Requirements for Reliance CDMA EVDO on SIM:- 1. We have to know the 8 digit HDR password of the RUIM before begining the process. 2. Download 4620L drivers. 3. Mifi should start installing various ports after installation of the driver 4. Using DFS, connect to status port and send SPC 000000 (the Jetpacks do not listen without this port) 5. Do not read or change any settings 6. Go to data and in HDR UID/Pass write A10000xxx@ in your HDR username, and the RUIM's 8 digit password in the password field. 7. Go to MIP section, without reading write A10000xxx or 'net' in the first profile, same in the RM NAI. 8. Reboot 9. Insert SIM and 3G connected. Requirements and procedure for EVDO on Tata Indicom Photon SIM:- 1. Using DFS, send SPC 000000 and go to MIP profile, enter 'internet' in the first profile and reboot. 2. After this change, any Tata SIM can be used since it has a universal MIP, unlike Reliance. (Any data pack with any denomination works) Note:- This is only for CDMA band of the Mifi. Router configuration is done by wifi by vz.hotspot or . GSM_WCDMA is global auto APN. ZTE 890L is fully unlocked and does not require any tweaking. This tutorial pertains to 4620L, 4620LE and 5510. None tested on MTS. Important update:- For Reliance, universal username/pass = net/net working for evdo on some firmwares and some firmwares need HDR username A1000xxx@hrpd.xxxx in first MIP profile in DFS and nothing else. HDR password is no longer required to work. Mifi4620_Drivers.zip

Good news is that SPR L720 works on OMH very well with data. I received a few phones last week which were shipped on 4.3 OTA. Rooted, flashed phil's recovery and updated to NAE 4.4 modem.tar, flashed rooted stock TW NAE 4.4 flashable ROM.zip from recovery and it reads any RUIM. Have also tested other international CDMA SIM cards on this baked tutorial. Chinese tutorial:- http://www.cdmamod.com/thread-1840-1-1.html the files:- http://pan.baidu.com/s/1hqsUCJU Note 1:- that GSM unlocking requires MDC modem, s4 unlocker and such, and that hidden menu may not be operable on 4.3/4.4 so please make sure its done before this procedure. The chinese tutorial states that a stock MK2 odin file is used, and then the 4.4 zip and the NAE modem, but i have not updated to 4.3 bootloader. Note 2:- OMH/GSM/NV mode (3 networks as called in China) also works on MDC base and CM roms. *Please use your favourite CDMA software to make the phone RUIM only/RUIM if avail before proceeding to this topic. *GSM usage by this method is under development. The entire tutorial is experimental and aimed towards achieving stock like performance.

Samsung Galaxy US Cellular R530U can/will brick while on 4.3 MJA if tried downgrading by Odin or recovery or by flashable zip MB1/MD4 firmware by SD card. Firmwares contain sbl1, sbl2, tbz and some other components fatal to the bootloader. The handset will be dead completely leading to the only option of JTAG Riffbox. It is also seen than pin-outs of JTAG to R530 are not easily mappable. Here is an emergency restore to boot into download mode by which you can re-flash the stock R530uvxubmja tar odin file. Things needed are:- 1. A 16GB class 10 SD card (for 16GB handsets, 32GB for 32GB handsets), a 16GB class 4 of Transcend or Sandisk also works..Tested !! 2. Download this file in a folder http://www.4shared.com/zip/l6N9muH_ce/win32diskimager-v09-binary.html 3. Insert the SD card into the PC, we are making image partitions, SD can get corrupt or unusable, card reader will get damaged. 4. Download this resurrection file extracted by JTAG https://app.box.com/SCH-R530U (a 32GB JTAG mmblk0 file will be uploaded soon by me 5. Open the unzipped application of the extracted folder and select the JTAG bin file and write to the SD card 6. Remove the SD card and put it in the R530, remove the battery, insert a good power adapter, re-attach the battery 7. Phone will start charging in off state, get into download mode and download this tar file http://upload.teamuscellular.com/5D1?d=1 8. Your phone is saved Edited:- more details added.

For this process, HTC One Sprint M7WLS should be rooted and S-off. Google it for the procedure till here. 1. Open your favourite CDMA software and make the RUIM config as RUIM if avail 2. Boot the phone into fastboot and type the following commands a. fastboot oem rebootRUU b. fastboot flash zip CT3G_radio.zip c. fastboot reboot Link for the radio https://drive.google.com/file/d/0BylQ6RZ2mIP_UjBkcWd3T1lITFk/edit?usp=sharing 2. http://www.4shared.com/zip/Wh-_Fvsuce/CT3G_radio.html Your phone will detect CDMA SIM network upon reboot.

Verizon has launched a ditto copy of Samsung Galaxy Stellar named Samsung Legend model no. i200.PP. This phone is marketed for their so called prepaid service. US sellers are getting confused or deliberately shipping i200.PP in place of the original Samsung Stellar i200 as the handsets are identical. This handset does not have a SIM card slot and the other distinct difference is in the MEID series. This phone has a series starting from A000XXXXXXXXX. Phone ships via 4.1.2 so hidden menu and other fixes and tweaks stop here. To map the diag port, download the attached utility. Use your favorite CDMA tool and a Samsung i605 password and the SPC will be displayed. Note that the SPC of this phone is not 000000 though its Verizon. All data parameters have been successful in programming this handset on our network. PhoneUtilss.apk

Verizon Pantech Breakout is an unlocked CDMA OMH SIM handset where all SIM cards support calls and sms. There is no hidden settings involved in achieving calling and messaging. However it does not support data on RUIM of Reliance but with some minor tweaking, Tata Indicom SIM supports 3G/EVDO internet. Steps:- 1. Root the phone in few steps following this guide and the attached files. http://www.techychat.com/2013/05/28/root-pantech-breakout/ 2. After successful root, download and install root explorer 2.16 or older 3. Replace my attached build.prop in system folder and apns-conf.xml in system/etc folder, set all permissions and reboot. 4. Dial *#*#4636#*#* and select CDMA only Note:- Data on this device only works in evdo areas. there is no 1x support available on this phone. data icon will remain 1x in evdo areas and no data will work in 1x areas. Evdo speed is recorded on this 1x icon. After putting this settings, there will never be any need to change/modify any setting even after changing to any number of SIM cards. Also note that there is no success on Reliance RUIM for data on this phone till date. apns-conf.xml build.zip