dkaile 1,051 Report post Posted July 3, 2008 Is anybody else facing the GPS problem like vijay? Share this post Link to post Share on other sites
vishalsheth 19 Report post Posted July 3, 2008 (edited) HetalDP said: vishalsheth said: Whenever I connect USB to pc, it asks for which connection to be made as in RDINS, USB or storage? Why is it so? It's normally all together. As in when connected, it allows all of them. I don't need to switch. 1. RNDIS Latest Network Active Sync Protocol - Hangs too much 2. USB for Older Active Sync Protocol over Virtual Serial Port - More Stable 3. Storage is for Only Accessing Memory Card as Drive on your Computer , Faster Storage Access of SDCard Reload the Reliance PRL which is there in Cracking-6800 Folder so International things will be Cleared cannot get into diag mode. How do I load it? While roaming international, I did not get the names of the network logged into. I only got Digital roaming. Is it possible to get the names? Edited July 3, 2008 by vishalsheth Share this post Link to post Share on other sites
dkaile 1,051 Report post Posted July 3, 2008 Hetal usually places it in Programs-Advanced Settings-DMRouter. If not there you can search and download DMRouter and use it to enter diag mode. Share this post Link to post Share on other sites
drmadhu 87 Report post Posted July 3, 2008 (edited) @Vishal for DMroutor Go to PROGRAMME->TITANCODES->Diang 3424 in advance setting DMRouter not work for QPST or CDMA workshop @Hetalbhai I am downloading destinator in ur new rom when i run route in destinator error message says "Progrramme Memory is full" with this problem i am unable to caclulate the route an i am must shutdown the destinator for this problem Please Hetalbhai Give solution Edited July 3, 2008 by vijaymalhotra_2007 Share this post Link to post Share on other sites
dkaile 1,051 Report post Posted July 4, 2008 (edited) @vijay @vishal DMrouter works perfectly from advance settings in QPST and CDMA workshop, only thing is that it minimises but works in the background. Also after you finish programming in QPST/CDMA workshop, do remember to once again click the DMRouter link and then quit DMRouter before soft reset so that the settings work perfectly. Try running Destinator from Memory Card. Edited July 4, 2008 by dkaile Share this post Link to post Share on other sites
vishalsheth 19 Report post Posted July 4, 2008 (edited) dkaile said: Hetal usually places it in Programs-Advanced Settings-DMRouter. If not there you can search and download DMRouter and use it to enter diag mode. I did that too. It enters but the Tx/Rx nos don't change. they are at 0/0. The other codes are also not working. 778 does not allow me to enter the edit screen. My NID is different. Can I call for PRL from reliance by sms? Edited July 4, 2008 by vishalsheth Share this post Link to post Share on other sites
vishalsheth 19 Report post Posted July 4, 2008 I smsed prl to 53733. *228 to program it. It's cleared now. Share this post Link to post Share on other sites
jabir 5 Report post Posted July 4, 2008 Hi All I got a problem now. I dont know everyone hav the same problem i got. This happened when i turned my speaker off to enable silent mode in mogul. Now evenafter i turned speaker on there is no ringing from phone. Also i cant change my ringtone. It is always on the default "Midnight" tone when i changed it it goes changing and after press ok for confirming it resets to "midnight" tone. There is no sound while rining now. therefore i lost my calls. When i first installed it got same problem after sometime. So i reseted the os (reinstalled) it. But there is anyother way. I think this is a bug please help me. Share this post Link to post Share on other sites
@v@nit 3 Report post Posted July 4, 2008 ^^^ Yes this bug is there, You need to hard reset your phone to restore the ringtone sound. Share this post Link to post Share on other sites
tanveer 59 Report post Posted July 4, 2008 jabir said: Hi AllI got a problem now. I dont know everyone hav the same problem i got. This happened when i turned my speaker off to enable silent mode in mogul. Now evenafter i turned speaker on there is no ringing from phone. Also i cant change my ringtone. It is always on the default "Midnight" tone when i changed it it goes changing and after press ok for confirming it resets to "midnight" tone. There is no sound while rining now. therefore i lost my calls. When i first installed it got same problem after sometime. So i reseted the os (reinstalled) it. But there is anyother way. I think this is a bug please help me. True seems to be a bug in this rom Some registry hack or do we ahve to roll back to an older rom for this small but really bothering thing. Share this post Link to post Share on other sites
jabir 5 Report post Posted July 4, 2008 But i think this rom is more stable than the previuos ones except this problem and more memory usage So please provide any some registry tweak or hack or something Share this post Link to post Share on other sites
tanveer 59 Report post Posted July 4, 2008 (edited) yeah. dont want to hard reset everytime i go into vibrate mode and want to come back into normal. Must be some tweak available. Thanks hetal once again. Seems much more stable. I like the leaves ringtone much more, wish that was the default one. I could use GPS with Gmaps and mapking. Have not tried destinator till date. Also cant see why it shows RON version as 3.35 instead of 3.56. The radio is updated though. Edited July 4, 2008 by tanveer Share this post Link to post Share on other sites
drmadhu 87 Report post Posted July 4, 2008 (edited) This New rom is far better than G Rom but still eat lot of memory what is the usage of the so many GPS programe installed in new rom give me detail of use of this progrrame. And members how to increase the speaker volume of the Mogul. The speaker volumme is very low when i listen the songs in media player. Edited July 4, 2008 by vijaymalhotra_2007 Share this post Link to post Share on other sites
Saurav 22 Report post Posted July 4, 2008 I think most of the guys expect a simple ROM that does not consume much memory. Now which is the best ROM till date. I think I should use the same on my 6800 (expecting soon). Share this post Link to post Share on other sites
jabir 5 Report post Posted July 4, 2008 Hetal Bhai PLease help how to solve this problem. Now l almost lost every incoming call i recieve without ringer pLease help can i rivert back to g rom is it possible? Share this post Link to post Share on other sites
drmadhu 87 Report post Posted July 4, 2008 @Jabir Hard reset ur phone ur problem is solve and after do not go for silent mode and use same rom other wise this rom is quite good than G rom Share this post Link to post Share on other sites
jabir 5 Report post Posted July 4, 2008 (edited) jabir said: Hetal BhaiPLease help how to solve this problem. Now l almost lost every incoming call i recieve without ringer pLease help can i rivert back to g rom is it possible? I got a solution for it. Goto Registry HKEY_CURRENT_USER/ControlPanel/Sounds/RingTone0/ Name Value (Default) (value not set) (dont change values) Catgory Ring (dont change values) SavedSound \Windows\Ring-Raining.wma (I think ur selected or default ringtone dont change values) Script apw3r (I dont know what it is dont change it values) Sound *vibrate* or *none* (CHANGE this to *ring*) i think this will solve the problem If not try this HKEY_CURRENT_USER/ControlPanel/Sounds/RingTone2/ Name Value (Default) (value not set) (dont change values) Sound Ring-WindowsMobile.wma (CHANGE THIS TO UR TONE) (Type the name like shown in ri ngtone selector) But Even now i cant change my ringtone thru the ringtone setttings wizard NB: I dont know much about this is the setting worked for me please do carefully and at your risk i am just a kid considering this things.. Edited July 4, 2008 by jabir Share this post Link to post Share on other sites
dkaile 1,051 Report post Posted July 5, 2008 vijaymalhotra_2007 said: @JabirHard reset ur phone ur problem is solve and after do not go for silent mode and use same rom other wise this rom is quite good than G rom That is not a permanent solution, vijay. @jabir Dont worry, Hetal will certainly search out a permanent solution soon Share this post Link to post Share on other sites
tanveer 59 Report post Posted July 6, 2008 Where is SPB mobile shell? couldnt find it Also the default file explorer is missing, Resco one was a trial that has expired, having problems looking for files. Fixes? Share this post Link to post Share on other sites
drmadhu 87 Report post Posted July 6, 2008 @Tanveer Spb mobile shell eat lot memory so i think hetal not load this one For file explorer resco file expoler is far better than default one. for registered version u have to load menualy from 6800EX-rom u will find the registered version kindly run this cab file path is Storage card->6800-ExRom->Boot->Other->RegistryEn_p.ARN.CAB & RescoExplorerEn_p.ARN.CAB run this two cab files. Share this post Link to post Share on other sites
ashoksoft 83 Report post Posted July 6, 2008 @tanveer :open bluetooth explorer, and then navigate to storage card or anywhere else for using the normal file explorer SPB seems to have been removed - you can reinstall that. Resco - is a shareware - but there are workaround available cheers karki Share this post Link to post Share on other sites
vishalsheth 19 Report post Posted July 7, 2008 jabir said: Hetal BhaiPLease help how to solve this problem. Now l almost lost every incoming call i recieve without ringer pLease help can i rivert back to g rom is it possible? I faced the same problem on the day this got posted. Share this post Link to post Share on other sites
dkaile 1,051 Report post Posted July 7, 2008 (edited) Good news Guys, Just contacted Hetal and got the solution to this problem from him. I am attaching the set-ringer.reg file as a zip file, which is the registry solution to this problem. Kindly unzip it to find the reg file. You will need to use Resco Registry Editor which is already there in the ROM (Resco 2008 Explorer), only you will have to enter Change Device ID and enter Serial as Device ID = PPC-6800 Serial = 36284, and then load/add this registry correction file to your registry. Pls note as I am not on Hetals new rom I have not tried it personally, but I have been assured by Hetal that it will work. Kindly use it and immediately post your results for the benefit of other users. Enjoy.... and you know who to Thank - Our Hetal BOSS as always... SetRinger_reg.zip Edited July 7, 2008 by dkaile Share this post Link to post Share on other sites
drmadhu 87 Report post Posted July 7, 2008 @Dhiraj not sholwed the problme yet i am installing this registry but not solved Share this post Link to post Share on other sites
vishalsheth 19 Report post Posted July 7, 2008 jabir said: jabir said: Hetal BhaiPLease help how to solve this problem. Now l almost lost every incoming call i recieve without ringer pLease help can i rivert back to g rom is it possible? I got a solution for it. Goto Registry HKEY_CURRENT_USER/ControlPanel/Sounds/RingTone0/ Name Value (Default) (value not set) (dont change values) Catgory Ring (dont change values) SavedSound \Windows\Ring-Raining.wma (I think ur selected or default ringtone dont change values) Script apw3r (I dont know what it is dont change it values) Sound *vibrate* or *none* (CHANGE this to *ring*) i think this will solve the problem If not try this HKEY_CURRENT_USER/ControlPanel/Sounds/RingTone2/ Name Value (Default) (value not set) (dont change values) Sound Ring-WindowsMobile.wma (CHANGE THIS TO UR TONE) (Type the name like shown in ri ngtone selector) But Even now i cant change my ringtone thru the ringtone setttings wizard NB: I dont know much about this is the setting worked for me please do carefully and at your risk i am just a kid considering this things.. i changed sound to \Windows\Ring-Raining.wma, which is the same as above in ringtone0. this worked for me. after reset it was fine. if profile changed then it's back to the samething. Share this post Link to post Share on other sites