patelaquib 0 Report post Posted June 14, 2008 I have got a HTC TOUCH unlocking procedure but it's from Sprint and i hav got Telus HTC Touch P3050 so can anyone tell me that it will work on my mobile here is the procedure: I did this for my Sprint Touch. I am still using it in the USA but my phone has been modified to support other carriers with no problem. The steps are simple: Here is what you need to do: 1. Download GetSPC(attached below) 2. Unzip to desktop 3. Turn off phone and remove battery. 4. Write down your HEX ESN 5. Power your device back on 6. Connect via ActiveSync or WMDC 7. Copy entire folder to main memory on device. 8. Run GetSPC.exe 9. In the top box type in your HEX ESN(make sure caps is on) 10. Click generate or whatever the button is named 11. The resulting number should be a 6 digit number, your MSL, write it down. 12. Search for, download and install Qualcomm's QPST tool.(not freeware) THE FOLLOWING STEPS ARE VERY DANGEROUS SO MAKE SURE YOU FOLLOW MY DIRECTIONS EXACTLY. 13. Run QPST Configuration(run as admin if Vista) 14. From the Dialpad, dial ##3424#(##diag#) 15. Connect device to computer via USB(this will install drivers) 16. In QPST Configuration, click ports. 17. Continue to add ports until the QPST Configuration detects your phone 18. Under active phones it should display your phone. 19. Click Start Clients/Service Programming 20. Select phone and click ok. DO NOT LEAVE FIRST TAB, THE SETTINGS TAB. THIS IS THE ONLY TAB WE WILL NEED TO CHANGE ANY SETTINGS 21. Under the settings tab, click Read from phone. 22. Input your MSL you got from GetSPC earlier. 23. Under codes where it says Service Programming, change this to 000000 24. Click Write to Phone 25. Wait 1 minute 26. Close Qualcomm QPST one window at a time. 27. Disconnect the USB cable from your device 28. Perform Soft reset once 29. Test new MSL(##000000#) 30. If new code does not go through, hard reset. 31. Depending on what device you have, follow the necessary steps to unlock your phone so you can flash a new ROM to it. 32. Install OEM ROM from carrier of choice or build your own custom ROM using the new carrier's information. 33. Follow instructions to flash new OS to device. 34. Call service provider and do some sweet talking to get them to activate the phone on their network. You may need to do some serious sweet talking because Sprint ESNs are not in Verizon's database and vice versa. This goes for all CDMA carriers. Good luck. Attached Files GetSPC.zip (60.9 KB, 116 views) GetSPC.zip Share this post Link to post Share on other sites
dkaile 1,051 Report post Posted June 14, 2008 ^^^^ Nothing new, quite similar to the procedure we are using here on reliance. In fact we have gone 1 step ahead and we do not need to do any sweet talking to anybody, but I am not telling you here. Only in Techie enclave... Share this post Link to post Share on other sites
HetalDP 947 Report post Posted June 14, 2008 I have got a HTC TOUCH unlocking procedure but it's from Sprint and i hav got Telus HTC Touch P3050 so can anyone tell me that it will work on my mobile here is the procedure:I did this for my Sprint Touch. I am still using it in the USA but my phone has been modified to support other carriers with no problem. The steps are simple: Here is what you need to do: 1. Download GetSPC(attached below) 2. Unzip to desktop 3. Turn off phone and remove battery. 4. Write down your HEX ESN 5. Power your device back on 6. Connect via ActiveSync or WMDC 7. Copy entire folder to main memory on device. 8. Run GetSPC.exe 9. In the top box type in your HEX ESN(make sure caps is on) 10. Click generate or whatever the button is named 11. The resulting number should be a 6 digit number, your MSL, write it down. 12. Search for, download and install Qualcomm's QPST tool.(not freeware) THE FOLLOWING STEPS ARE VERY DANGEROUS SO MAKE SURE YOU FOLLOW MY DIRECTIONS EXACTLY. 13. Run QPST Configuration(run as admin if Vista) 14. From the Dialpad, dial ##3424#(##diag#) 15. Connect device to computer via USB(this will install drivers) 16. In QPST Configuration, click ports. 17. Continue to add ports until the QPST Configuration detects your phone 18. Under active phones it should display your phone. 19. Click Start Clients/Service Programming 20. Select phone and click ok. DO NOT LEAVE FIRST TAB, THE SETTINGS TAB. THIS IS THE ONLY TAB WE WILL NEED TO CHANGE ANY SETTINGS 21. Under the settings tab, click Read from phone. 22. Input your MSL you got from GetSPC earlier. 23. Under codes where it says Service Programming, change this to 000000 24. Click Write to Phone 25. Wait 1 minute 26. Close Qualcomm QPST one window at a time. 27. Disconnect the USB cable from your device 28. Perform Soft reset once 29. Test new MSL(##000000#) 30. If new code does not go through, hard reset. 31. Depending on what device you have, follow the necessary steps to unlock your phone so you can flash a new ROM to it. 32. Install OEM ROM from carrier of choice or build your own custom ROM using the new carrier's information. 33. Follow instructions to flash new OS to device. 34. Call service provider and do some sweet talking to get them to activate the phone on their network. You may need to do some serious sweet talking because Sprint ESNs are not in Verizon's database and vice versa. This goes for all CDMA carriers. Good luck. Attached Files GetSPC.zip (60.9 KB, 116 views) SORRY BOSS THIS WILL NOT WORK AS RELIANCE DONT ACCEPT OUT OF NETWORK ESN Share this post Link to post Share on other sites
