amitjatin 0 Report post Posted October 7, 2008 I had changed to "RUIM if Available" through CDMA workshop but when i insert reliance UIM card and connect the data card to laptop on running application no network signal present and the connect button is disabled. The data card light which was Bleu previously had been turned green Pls advice what can be done Rgds Share this post Link to post Share on other sites
ashoksoft 83 Report post Posted October 7, 2008 Try restarting the application once Share this post Link to post Share on other sites
Sadikk 301 Report post Posted October 7, 2008 @Amit jatin use QPST instead Make it RUIM Only. Share this post Link to post Share on other sites
@mitJ@in 256 Report post Posted October 7, 2008 Sadik he is Amit Jatin not Amit Jain.. Share this post Link to post Share on other sites
Sadikk 301 Report post Posted October 7, 2008 Lol Thanks for pointing that. Thanks. Share this post Link to post Share on other sites
prihir 53 Report post Posted November 9, 2008 Guess whats in store now You can unlock your Huwaei EC 325 Data card to accept RUIM's from any network Enable RUIM Support 1. Connect Data Card to PC 2. Find port on which the data card is connected by checking in device manager > ports 3. Connect CDMA workshop to the said port, and read SPC using NVM_0002 method 4. Run QPST, in 1x/HDR Security, change R-UIM config to R-UIM if available. Your data modem is ready to accept Reliance RUIM Cards. Now update the firmware to the attached firmware ... and hey presto - you can use RUIM's from any network now !!!! useful for unltd internet access from garuda (399/- pm) to be used using a datacard!! cheers karki HELLO ASHOKBHAI !!!!!! I HAVE ALLREADY DONE ONE OF DATA CARD RUIM. I AM PURCHASE ONE MORE IN THIS CARD THERE IS PROBLEM IN QPST THAT " THE PHONE HAS STOPPED REPOSPONDING TO MEMORY READ/WRITE COMMANDS" WHEN DOING "IF R-UIM AVIAILABLE. I HAVE TO DONE ALL PROSESS TOW OR THREE TIME . BUT STEEL THE PROBLEM WAS THERE. WHAT TO DO ? PLEASE ADVICE HIREN Share this post Link to post Share on other sites
jacobmukalel 0 Report post Posted March 17, 2009 Guess whats in store now You can unlock your Huwaei EC 325 Data card to accept RUIM's from any network Enable RUIM Support 1. Connect Data Card to PC 2. Find port on which the data card is connected by checking in device manager > ports 3. Connect CDMA workshop to the said port, and read SPC using NVM_0002 method 4. Run QPST, in 1x/HDR Security, change R-UIM config to R-UIM if available. Your data modem is ready to accept Reliance RUIM Cards. Now update the firmware to the attached firmware ... and hey presto - you can use RUIM's from any network now !!!! useful for unltd internet access from garuda (399/- pm) to be used using a datacard!! cheers karki HELLO ASHOKBHAI !!!!!! I HAVE ALLREADY DONE ONE OF DATA CARD RUIM. I AM PURCHASE ONE MORE IN THIS CARD THERE IS PROBLEM IN QPST THAT " THE PHONE HAS STOPPED REPOSPONDING TO MEMORY READ/WRITE COMMANDS" WHEN DOING "IF R-UIM AVIAILABLE. I HAVE TO DONE ALL PROSESS TOW OR THREE TIME . BUT STEEL THE PROBLEM WAS THERE. WHAT TO DO ? PLEASE ADVICE HIREN Any body please send me the cdma work shop to "jacobmukalel@yahoo.com". It will be highly appreciated. Thank you Share this post Link to post Share on other sites
aaslaan 0 Report post Posted October 5, 2010 Guess whats in store now You can unlock your Huwaei EC 325 Data card to accept RUIM's from any network Enable RUIM Support 1. Connect Data Card to PC 2. Find port on which the data card is connected by checking in device manager > ports 3. Connect CDMA workshop to the said port, and read SPC using NVM_0002 method 4. Run QPST, in 1x/HDR Security, change R-UIM config to R-UIM if available. Your data modem is ready to accept Reliance RUIM Cards. Now update the firmware to the attached firmware ... and hey presto - you can use RUIM's from any network now !!!! useful for unltd internet access from garuda (399/- pm) to be used using a datacard!! cheers karki Hi Ashok, Im trying to unlock a HUAWEI EC325 with the CDMA Workshop 2.7 which has the options of going up to COM25. I followed the steps but did not get the 1x/HDR Security option. Instead I followed the steps: 1. Read and Enter Port No. from Devices & Printers 2. Connect the modem using CDMA Workshop 2.7 3. 'Read' the data 4. Go to the tab 'Security' 5. In SPC, select 'universal,EFS method' then click Read > Choose nv_0002 > and I see '0000' and the 6 digit code. I enter the code in the SPC space and select SPC > Write. It says 'SPC Correct. Phone unlocked.'. 6. In the 'Other' Tab, under 'R-UIM' - I select Config (the default is always blank) - Choose 'R-uim,, if avail' > Click on 'Write' and it says #1 and #2 changed successfully. Then I go to the main tab and disconnect the device. It asks me Save/Offline DM Mode - I click yes. 7. Upgrade firmware successfully with the attached file here. But using Huawei Mobile Connect - it does not read my sim card in the modem. Even other SMS softwares, detect the device/modem but are unable to send SMS's using it. I keep getting an error, CMS +501 or 301 or Timeout. Pls suggest which step is incorrect. Thanks in advance, Aaslan. Share this post Link to post Share on other sites
