New To Treo!

[Hellangelo 2]

Hi Guys,

I managed to get one of these from Sadikbhai, can you guys guide me as to how can I connect the phone to the reliance netconnect, I tried making a new "virtual modem" connection and entered the username and password, and #777 to dial, but every time i try to connect, it says "Your phone must be configured for vision services", and also suggest some helpful software and where to get them?

[dkaile 1,051]

^^^^

What phone are u using. You have not mentioned the model no. If it is Treo 755p then kindly do not open new topics on whim, when one topic is running. Kindly post all queries in the Treo 755p topic, in future...

Anyways, from what I gather, if the vision services message is coming, that means u have not properly configured your phone to reliance settings.

First check whether you have created a new connection by the name of Rel Netconnect. Go to Preferences-Network-Services. If it is there, select it, if not create it. To create Click Menu Button (Lowest in Right Corner) and select New-It will show untitled-give it the name RelNetConnect- Connection should be High Speed Wireless, Username and Password will be your 10 digit Reliance Phone no., Untick Mobile IP Tab in Details. In Advanced IP Address should be Automatic (Ticked), Query DNS should be Ticked. You should be able to connect to Internet by selecting and making this your default connection.

You may also create a similar RelMobile World connection where the username will be "UTS@relianceinfo.com", password-kindly search the forum, as I dont remember.

If for some reasons you are still not able to do so, then we will have to check your service programing data-

Dial ##data# (##3282#) and u will come on data main screen. You will have to click modify and enter your SPC (u should have changed it to 000000 otherwise enter your correct spc) and u will have to change the parameters. After unlocking, enter username - (anything u like-preferably your name without spaces), then enter password (anything), HA password (anything), ensure IP address is automatic (ticked),. Then go to next menu by pressing the Menu Button (Lowest in Right Corner), the go to Browser - enter one "0" in port in both Pri NGG and Sec NGG, then go to Advance, Unlock, then enter as follows: Vocoder EVRC:1, Home NID:65535, Home SID: 14655, MCC: 404, MNC: 0, ACCOLC: (should be last digit of your MIN), Home Sys Reg:1, FNID:1, FSID:1 - Click OK. After loading Reboot once again.

You should be able to connect to internet.

Remember, any further queries post in Treo 755p topic ONLY and give reference of this post...

Edited September 4, 2008 by dkaile

[Dj 25]

Dhiraj,

every time u successfully connect to rconnect, the following attempt to connect comes up with error #303?

[dkaile 1,051]

Have u downloaded and installed modem drivers. Is Palm visible as a modem in Control Panel.

To install modem drivers put the enclosed CD and use the install modem link.

Further to use phone as modem, a connection shortcut has to be created on the desktop of your PC.

Edited September 5, 2008 by dkaile

[Dj 25]

i was talking about using net on the treo itself... not tethering

[dkaile 1,051]

Gotchha now, problem being researched, kshah also says no resolution yet, except reboot.

[kshah 452]

error 3000 is problem of time out values in ROM, Even if it is configured by PST it remain there. Verizon had this problem so severe that they suspended sale of treo 755p for time being. It is said to be partially resoved after rom ver 1.07.

It was there in my treo 700p too. Recycle phone and error goes away.

[Hellangelo 2]

@Dkaile

Thanks a million, I am sorry I forgot to mention 755, but let me take the opportunity to really appreciate all the time and effort you put in to help me connect. Thanks once again, brother. And, yes now I am able to connect. And sorry for posting out of Treo, I didnt realize a thread already existed on it.

^^^^

What phone are u using. You have not mentioned the model no. If it is Treo 755p then kindly do not open new topics on whim, when one topic is running. Kindly post all queries in the Treo 755p topic, in future...

Anyways, from what I gather, if the vision services message is coming, that means u have not properly configured your phone to reliance settings.

First check whether you have created a new connection by the name of Rel Netconnect. Go to Preferences-Network-Services. If it is there, select it, if not create it. To create Click Menu Button (Lowest in Right Corner) and select New-It will show untitled-give it the name RelNetConnect- Connection should be High Speed Wireless, Username and Password will be your 10 digit Reliance Phone no., Untick Mobile IP Tab in Details. In Advanced IP Address should be Automatic (Ticked), Query DNS should be Ticked. You should be able to connect to Internet by selecting and making this your default connection.

You may also create a similar RelMobile World connection where the username will be "UTS@relianceinfo.com", password-kindly search the forum, as I dont remember.

If for some reasons you are still not able to do so, then we will have to check your service programing data-

Dial ##data# (##3282#) and u will come on data main screen. You will have to click modify and enter your SPC (u should have changed it to 000000 otherwise enter your correct spc) and u will have to change the parameters. After unlocking, enter username - (anything u like-preferably your name without spaces), then enter password (anything), HA password (anything), ensure IP address is automatic (ticked),. Then go to next menu by pressing the Menu Button (Lowest in Right Corner), the go to Browser - enter one "0" in port in both Pri NGG and Sec NGG, then go to Advance, Unlock, then enter as follows: Vocoder EVRC:1, Home NID:65535, Home SID: 14655, MCC: 404, MNC: 0, ACCOLC: (should be last digit of your MIN), Home Sys Reg:1, FNID:1, FSID:1 - Click OK. After loading Reboot once again.

You should be able to connect to internet.

Remember, any further queries post in Treo 755p topic ONLY and give reference of this post...

Edited September 6, 2008 by Hellangelo

[brainbraym 0]

error 3000 is problem of time out values in ROM, Even if it is configured by PST it remain there. Verizon had this problem so severe that they suspended sale of treo 755p for time being. It is said to be partially resoved after rom ver 1.07.

It was there in my treo 700p too. Recycle phone and error goes away.

Hi, does this problem persist or has a solution been found for the Error 3000. I too am getting this error on my Palm Treo 700p - Any solutions yet.

Thanks

[dkaile 1,051]

@BB

were ur other problems solved by acting according to post no.2, if they were, u should at least post a comment, whether they were or were not...

[aviator 3]

Dear Techies,

I am facing a strange problem while installing software on my Treo 755P.

While i am able to drop the prc file in install folder (In palm dekstop by ACCESS) since i am using vista.

While installing it says, "the file will be installed next time ur Palm Hotsyncs".

While using Hotsync, the sync is stopping at installing media and doesn't show progress even for an hour.

I am unable to understand why this is happening?

Is there anyother method to install softwares in treo 755P?

Kindly guide.............

Regards,

[Genius 817]

Mods all this has been discussed and posted in Sticky thread of palm please close and merge and hey HELLANgelo search and look understand before you post.

[Arun 795]

OK, for others who haven't noticed the sticky topic, here it is: http://www.rimweb.in/forums/index.php?showtopic=16215