Jump to content
Reliance Jio & Reliance Mobile Discussion Forums
patelaquib

Unbricking Htc Vogue

Recommended Posts

Unbricking Vogue / and downgrading SPL

--------------------------------------------------------------------------------

Edited *This will help those that are stuck at the HTC welcome screen and cannot get past it to load IMCokeMan's Unlocker.**

Edit by ImCoKeMaN: If you are stuck in bootloader (3 color screen) use titanexitbl or mtty (set 16 0 then task first and try these steps only if that doesn't work.

Apparently you can not use SDHC cards with this method, please use the 512mb card that came with your phone.

I have successfully unbricked my phone due to updating the Alltel rom to a non Alltel Vogue, before IMCokeman had released his unlocker an also have downgraded to the previous SPL version. I will shortly update this post with the How to instructions. I just need to retrace my steps.

I would first like to thank IMCokeMan for his help and unlocker.

I currently have a Sprint Vogue but I assume this will work for all versions

For those that had loaded the Alltel rom without the unlocker and have bricked there phone try this procedure to unbrick your phone.

1. First download IMCokeMaN's 2.31 Unlocker. http://rapidshare.com/files/11019074...r_MFG_2.31.exe

2. Extract IMCokeMan's unlocker

Previous SPL version was 2.31 current SPL version is 0.36

Edit by ImCoKeMaN:

Note: Steps 3, 4 and 5 should not be necessary, but step 6 is critical that it is a signed rom from your carrier

3. Navigate to the extracted folder and within the folder you will find the following file called VOGUIMAG2.nbh and rename it to VOGUIMG.nbh

4. Copy the file to a fat32 memory card, and insert it back into your phone, and place it into bootloader mode.

5. The phone should display Loading... let it sit there for a minute or so. It will not go past this screen, now reboot the phone.

6. Extract your official rom using WINRAR by right click and extract files (Must be a signed EXE from your carrier get it from HTC support website)

7. Navigate to the extracted folder and within the folder you will find the files

8. Copy the files to your memory card (less than 2gb and formated fat32) and insert it back into the phone and place it back into bootloader mode(POWER+CAMERA+RESET USING STYLUS), and install the your Carrier's Official ROM.

I have attached the VOGUIMG.nbh file for those that are having problems.

VOGUIMG.zip

Share this post


Link to post
Share on other sites

I am work for my friend touch when I am load sprint new 3.03 rom my connection was lost and my phone was not start

I read this topic but when I am extracted original sprint rom folder I find to files with .nbh extention

So which file I am change the name and load through sdcard please guide me

Two file name

1.nbh and 2.nbh

So please guide

Edited by vijaymalhotra_2007

Share this post


Link to post
Share on other sites

I am found the solution

Use 2.nbh file and rename with VOGUIMG.nbh and load in to micro sd card and run bootloader after loading the cokes bootloader.

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


×