LG LSP 340E Secret Service Menu

[Vishal Gupta 4]

Guys!

Here is the way to enter into LG LSP340E Service Menu.

Follow these steps:

1. Press <Menu>+0

2. It'll ask 6-digit lock code

3. type ur SPC code

And u'll enter into service menu.

[kams19 0]

Vishal... its saying incorrect lock code try again

[emmi 3]

maybe the 6 digit code varies from circle to circle.And vishal where did u get the code from??

[Code 0]

I think the 6 digit code is MSL (master security lock) code and will there fore vary from handset to handset. I don't think we can discuss here how to obtain that ...

[Vishal Gupta 4]

U can know ur 6-digit lock code by reading FWP File System as i mentioned here:

http://www.rimweb.com/forums/index.php?showtopic=656&st=0&

[Vishal Gupta 4]

Guys!

I found 8 options in FWP Service Menu:

1. VERSION

2. SELECT NAM

3. Auto NAM

4. FIELD SERVICE

5. Set Service

6. DM/DS SET

7. THE OTHERS

8. New Lock Code

1. VERSION shows s/w version, PRL and other things.

2. SELECT NAM lets u to change between NAM #1 and NAM #2. I changed NAM #1 to NAM #2, then FWP didnt detect any network signal.

3. Auto NAM lets u to On or Off the setting. Default is Off. I changed it to On but nothing happened.

4. FIELD SERVICE shows following 5 options:

a.) Test Screen

b.) Test Call

c.) Error List

d.) Clear Error

e.) Data Test Scrn

a.),b.), and e.) options are to test settings of screen, call and data screen respectively.(Nothing special).

c.) option displays some data from 00 to 19.

d.) option Lets u to clear Error log that c) option displays.

5. Set Service display ESN and lets u to change A-Key, to exit this option press Speaker Phone or End button or switch off the phone and switch on again.

6. DM/DS SET option lets u to change between DM and DS, Default is DS.

7. THE OTHERS option displays following 8 options:

a.) Vocoder

b.) Release Time

c.) Language

d.) Banner On/Off

e.) QNC On/Off

f.) OVERLAP

g.) PCO

h.) MODE

a.) Vocoder option lets u to change between EVRC and 13k, Default is EVRC.

b.) U can edit Release Time, I think Its for setting the time of purchasing or manufacturing.

c.) Language option lets u to change language between English, Poetuguese, Spanish.

d.) Banner option is set to Off by default. If u change this option to On, then the phone will display Reliance logo instead of Date.

e.) QNC is Enable by default.

f.) OVERLAP option lets u to change between ENBLOCK, NO_LE_NO_TONE, LE_NO_TONE_OFF, LE_TONE_OFF.

Default is ENBLOCK. I changed the setting to rest of them but after changing to all i was not able to dial any number.

g.) PCO option is for PCO owner. It is set to VOICE by default. I changed it to PCO, then an extra option Metering Info is added into Security settings to check call unit, call time, etc.

h.) MODE option lets u to change between Slotted and Non Slotted. Default is Slotted.

8. New Lock Code is same as <Menu>+4+6. It lets u to change lock code.

ENJOY!!!

[Vishal Gupta 4]

Guys!

In 5th option Set Service when u enter, there r following settings:

1. 1st option is "ESN" and two buttons <OK> and <AKEY>.

If u press <AKEY>, it'll allow u to enter new AKEY.

If u press <OK> it'll show u next option.

2. Next option is "NAM1 NUMBER" (allow u to edit it)

3. "BASIC NAM1 PROGRAMMING" and two buttons <EXIT> (exit from service programming & phone restarts) and <MORE> (to set other settings).

If u'll press <MORE>

4. "SERVICE CODE" (allow u to edit it).

5. "NAM1 MCC" (allow u to edit it)

6. "NAM1 NMSID" (allow u to edit it)

7. "NAM1 TRUE MCC" (allow u to edit it)

8. "NAM1 TRUE NMSID" (allow u to edit it)

9. "NAM1 CDMA CH1" (allow u to edit it)

10. "NAM1 CDMA CH2" (allow u to edit it)

11. "NAM1 CDMA CH3" (allow u to edit it)

12. "NAM1 CDMA CH4" (allow u to edit it)

13. "NAM1 HOME SID" (allow u to edit it)

14. "NAM1 HOME NID" (allow u to edit it)

15. "NAM1 HOME Sys" (YES or NO)

16. "NAM1 FORN SID" (YES or NO)

17. "NAM1 FORN NID" (YES or NO)

18. "NAM1 NAME" (allow u to edit it)

19. "NAM1 ACCOLC" (Can't Edit)

20. "PHONE MODEL" (Can't Edit)

21. "SLOT CYCLE INDEX" (allow u to edit it)

That's all settings, that r available in "Set Service" option.

If u change NAM of the phone from NAM#1 to NAM#2 (by using 2nd option "Select NAM" in service menu), then u can edit all the settings that i've defined for NAM#2 also.

[Vishal Gupta 4]

Guys!

I am able to activate NAM#2 in my FWP.

I mean now my FWP is set to NAM#2.

I want to know the benefit and loss of it.

I mean like free calls, better network, etc.

pls tell me.

[Code 0]

I don't think it wud be of any benefit at all ... unless U can register Ur same phone with two service providers. In that case U could switch between the two providers -- but still U can be on only one network at any point of time. I don't think we can discuss the technicalities of such a thing as it may not be legal either.

[Vishal Gupta 4]

I want to know only that will NAM#2 give better network than NAM#1, cauz normally all FWP r set to NAM#1, and my FWP is set to NAM#2, so there should be better network than NAM#1.

[Utsav 0]

May be it's like Slect Line>> Line1/Line2 as available in RIM handsets. But if they deactivate the line from their towers then phone can be dead. I'm afraid the second line may be for the RIM and not for RIP. So you may be charged as per RIM!

[gadget_monk 0]

Slot Cycles

A typical CDMA phone wakes up periodically and turns on its receiver briefly to see if it has been paged, which means to find out if there is an incoming call. This happens on what is known as a slot cycle, and the period of the slot cycle is controlled by the cell and/or network. Slot cycle indices are numbers from 0 to 7, and for any index the period is 1.28 seconds multiplied by 2^index. Increasing the slot cycle will delay the receipt of incomming calls/sms but will also reduce battery consumption as the receiver will use less power. Common values for slot cycles are 1 or 2.

[Vishal Gupta 4]

U mean if i set it to 0, then it'll receive SMS and calls very quickly.

[Code 0]

I don't think the delay really maters(very small) but it can result in a significant increase the battery drain.

[Vishal Gupta 4]

I'm afraid the second line may be for the RIM and not for RIP. So you may be charged as per RIM!

May be NAM#2 for VIP persons or Web-world.

I mean we can use it for free.

Cauz i think there is no logic for using NAM#2 for RIM.

Can anybody throw some light on it?

[ami114 0]

Hi all,

When i've activate PCO option then i found that under security menu but that alwas show meter 0 no call details there. Any comment?

[Vishal Gupta 4]

i also found that option.

Its for PCO guys.

Not for us.

we can activate that option but it works only when we authorized for this service like other PCO

[ami114 0]

i also found that option.

Its for PCO guys.

Not for us.

we can activate that option but it works only when we authorized for this service like other PCO

15606[/snapback]

Oh to ye baat hai ....Thank you vishal.

[amitivl 0]

i also found that option.

Its for PCO guys.

Not for us.

we can activate that option but it works only when we authorized for this service like other PCO

15606[/snapback]

I am Looking for i-phone but i am not able to see any changes in that because i need to know the SPC and we can only know it by connecting it to PC and i need to have the cable USB type "B" to COM port. I tried all the possible things but i am not able to See any file system. :

1. I connected it by Printer USB cable and installed it at com 4.

2. Tried it with USB to COM convertor.

3. Tried All the Softwares.

Please if you can tell me how to read it from USB directly with a specific software.

Or give me a cable diagram to make a cable like WHAT I REQUIRE.

And Also i need the same solution for SAMSUNG N -191

Please help me out my email id is amit@ivl.co.in

Thanks in advance

Amit

Edited August 5, 2005 by Vishal Gupta

[rohsum 0]

Hi...

Please tell me how to get the SPC code for my handset, I use an LG LSI 110 Cordless.

I want to program it.

Rohit

Edited August 5, 2005 by Vishal Gupta

[dks89 0]

Hi,

I also need SPC lock code for LG FWP

Thanks

DKS89

[dks89 0]

hi

I am unable to detact my phone Bitpim and also any code any body tell me what is the code so as i can try it.

dks

[Vishal Gupta 4]

Pls read the whole topic carefully.

U'll get the answers...

[heme_ndra 0]

Guys!

Here is the way to enter into FWP Service Menu.

Follow these steps:

1. Press <Menu>+0

2. It'll ask 6-digit lock code

3. type ur SPC code

And u'll enter into service menu.

Can u pls tell me what is the SPC for Reliance LG rd6000

[Honest 836]

All my dear LGLSP340E users.

The SPC code for this FWP handset is 000000.

Other handset owners can also try this code, may this code work for them also.

@Vishal

You had done a good job to recognize this secret menu.

Enjoy!

Regards.