kets4u 3 Report post Posted October 16, 2008 @dhirajseems like for every new user v will have to post setings .............. to all newbies PLZ PLZ read this thread properly before asking questions as most of the settings have been provided in these pages for internet settings go to -page 6 for mail settings go to -page 18 if u want to manually retrieve mails then versamail works good enough.....if u want imap push then use chatter email most of the essential softwares with their solutions have been posted in the thread ....... so plz read the thread properly n if u r not following it or still having problems so let us know Ok Dr. Sir... forry missed out ur name in SIR list... but u too are one of the names in genious list... ill go home nd read it now.... Share this post Link to post Share on other sites
dkaile 1,051 Report post Posted October 16, 2008 Ketan - Read the above post no. 273 please.... and do settings accordingly.... Share this post Link to post Share on other sites
Dj 25 Report post Posted October 16, 2008 just as i suggested... we shud post a newbies how to or a wiki for all the common tweaks and procedures to avoid hassles and constant reminding Share this post Link to post Share on other sites
Mufaddal 678 Report post Posted October 16, 2008 just as i suggested... we shud post a newbies how to or a wiki for all the common tweaks and procedures to avoid hassles and constant reminding nice idea ....i think now its time to implement this idea as it is not possible to repeatedly post the same thing ........also it would b difficult for a newbie to go through all the pages of the thread just to find out what he needs.......so for the betterment of both i support this idea and since our treo community is growing by the day its better to start a new thread/wiki for all essential settings and essential softwares Share this post Link to post Share on other sites
kets4u 3 Report post Posted October 16, 2008 just as i suggested... we shud post a newbies how to or a wiki for all the common tweaks and procedures to avoid hassles and constant reminding nice idea ....i think now its time to implement this idea as it is not possible to repeatedly post the same thing ........also it would b difficult for a newbie to go through all the pages of the thread just to find out what he needs.......so for the betterment of both i support this idea and since our treo community is growing by the day its better to start a new thread/wiki for all essential settings and essential softwares Now thats a good point... to start New topik with all the various Settings explained in Details... since the "Minority League" is steping into Major one with our entry (Thnx to Saddikbhai) DhirajSIR i posted the reply b4 u gave the step by step guide... i tried doing all the steps (except the IP add thing which ill go home nd try @ ngt) but aft doing the RelNet connect when i click connect it still does through Sprint connect nd gives me error... as for the IP thing is concerned there are IP add given there should i deleat all and just PUT one "0" as u said or wat.. dnt mind but me not v. familier with these things so gona pestor all the GURU's in here.... Share this post Link to post Share on other sites
dkaile 1,051 Report post Posted October 16, 2008 (edited) @ketan There is no way your internet will not work if you have followed the instructions in the above post no. 273 carefully and implemented it fully. Also remember to Reset your phone (by taking out the battery and reinserting it) every time after you use the internet, because this is a problem in Treo as mentioned many times before, otherwise you will get error message. So pay attention once again and follow that post carefully and your internet will run, unless you are making some mistake, because there is no other way we can guide you... or you can call me... Edited October 16, 2008 by dkaile Share this post Link to post Share on other sites
kets4u 3 Report post Posted October 16, 2008 @ketanThere is no way your internet will not work if you have followed the instructions in the above post no. 273 carefully and implemented it fully. Also remember to Reset your phone (by taking out the battery and reinserting it) every time after you use the internet, because this is a problem in Treo as mentioned many times before, otherwise you will get error message. So pay attention once again and follow that post carefully and your internet will run, unless you are making some mistake, because there is no other way we can guide you... or you can call me... Appriciate ur help will go home nd try all the steps.... Thnx bro Share this post Link to post Share on other sites
kshah 452 Report post Posted October 17, 2008 Instead of reboot entire device just recycling phone by long pressing red key will do the same job. Share this post Link to post Share on other sites
Mufaddal 678 Report post Posted October 17, 2008 exactly even i turn off /on the radio rather than removing out the battery everytime..........also if atall i have to reset the device for anything then i use uninstall manager it has an option of soft reset .....so i dont have to take out my battrey and work gets done Share this post Link to post Share on other sites
kets4u 3 Report post Posted October 17, 2008 exactly even i turn off /on the radio rather than removing out the battery everytime..........also if atall i have to reset the device for anything then i use uninstall manager it has an option of soft reset .....so i dont have to take out my battrey and work gets done Dr. Muf Guru... I need to know few things.. 1 - THere is this green light that is on all the times is thta ok? 2 - I got the 8 Gb card frm SaddikBhai to transfer the data on to the card do i need to remove the card all the time put it in the card reader and transfer the data?? coz when i try doing it from Palm Quick install it shows NO card Found.. HOw do i do it... 3 - when im transfer data via card reader the same is not being recognised by the system aft some time.... kindly advice all the guru's wats to be done Share this post Link to post Share on other sites
Mufaddal 678 Report post Posted October 17, 2008 exactly even i turn off /on the radio rather than removing out the battery everytime..........also if atall i have to reset the device for anything then i use uninstall manager it has an option of soft reset .....so i dont have to take out my battrey and work gets done Dr. Muf Guru... I need to know few things.. 1 - THere is this green light that is on all the times is thta ok? 2 - I got the 8 Gb card frm SaddikBhai to transfer the data on to the card do i need to remove the card all the time put it in the card reader and transfer the data?? coz when i try doing it from Palm Quick install it shows NO card Found.. HOw do i do it... 3 - when im transfer data via card reader the same is not being recognised by the system aft some time.... kindly advice all the guru's wats to be done which green light r u talking about ??????? the led one????the led light is not on all the times... well your device very well supports 8gb card put in an adapter....though it will only show 4gb (pointed by dhiraj) but its fine as you could read and write on your card u can put data on the card by both the ways either put in a crad reader (if will b fast enough) or use usb 1.1 transfer of palm n use card reader to transfer data is your card recognised by the device .......in card info can u see your card details also does ur system recoginse the card properly Share this post Link to post Share on other sites
dkaile 1,051 Report post Posted October 17, 2008 -Green Light comes on only when there is a message or missed call which you have not seen or dismissed, Kindly see/dismiss it and green light will be gone - U need to reformat your card by FAT32 and then reuse it - Better do it from Palm, if it does not recognise then do it from Usb Card Reader. After that you need to install it in Palm Device Once so that Palm makes it own file system. Then u can start using it normally. Just dont delete the folders created by Palm. And 8 GB is working on my Palm, though it will be recognised only as 4 GB. And what about ur other problems of internet connectivity, if they are solved, u should always put in a note in the forum before proceeding. Just basic forum manners... Share this post Link to post Share on other sites
Mufaddal 678 Report post Posted October 17, 2008 was goin to mention about fat32 format......good one dhiraj also speaking of leds ......treo 755p is programmed to blink only to indicate alerts or charge status......but if u want it to blink to show the network status like in previuos treos or like htc devices heres an application it blinks green on connecting to network and flashes yellow when u loose network ( u can also use butler) ServiceLED.zip Share this post Link to post Share on other sites
kets4u 3 Report post Posted October 17, 2008 -Green Light comes on only when there is a message or missed call which you have not seen or dismissed, Kindly see/dismiss it and green light will be gone- U need to reformat your card by FAT32 and then reuse it - Better do it from Palm, if it does not recognise then do it from Usb Card Reader. After that you need to install it in Palm Device Once so that Palm makes it own file system. Then u can start using it normally. Just dont delete the folders created by Palm. And 8 GB is working on my Palm, though it will be recognised only as 4 GB. And what about ur other problems of internet connectivity, if they are solved, u should always put in a note in the forum before proceeding. Just basic forum manners... Dhiraj GURU.. i have not yet done teh Net connectivity thing... was out of town over night... but as soon as i do.... id let u know for sure.... Thanx in advance.... ill have to check teh card reader coz it shows connected when i put it in usb port but as soon as im transfering the data perticularly the MP3 & Jpeg pics it stops and i get a error syaing Insert in F drive... But i still have not been able to transfer stuff to the card Via palm Quick install i have transfered the Pics nd MP3 on quick Install but when i sync it doensmt do the needful.... Dr. Muff Guru ill try wat u saying... hope it works.. Thnx Share this post Link to post Share on other sites
mihirf2003 7 Report post Posted October 17, 2008 as dhirajbhai menitoned there is a new rom version available on palm site...it says version 1.07 while on my phone it says 1.04... now if i upgrade it to 1.07 will i lose my reliance settings??? and wat file i need to install from the whole archive??? Thnk u.... Share this post Link to post Share on other sites
kets4u 3 Report post Posted October 17, 2008 was goin to mention about fat32 format......good one dhirajalso speaking of leds ......treo 755p is programmed to blink only to indicate alerts or charge status......but if u want it to blink to show the network status like in previuos treos or like htc devices heres an application it blinks green on connecting to network and flashes yellow when u loose network ( u can also use butler) Dr. M.. as i understands the more the Led blinks more the battry is used... so ill save teh bat.. nd let it blink only during charge.. or missed thing.. thnx.... Is there a software to lock perticular Video / photo file?? or all of them is read automatically.... Share this post Link to post Share on other sites
mihirf2003 7 Report post Posted October 17, 2008 was goin to mention about fat32 format......good one dhirajalso speaking of leds ......treo 755p is programmed to blink only to indicate alerts or charge status......but if u want it to blink to show the network status like in previuos treos or like htc devices heres an application it blinks green on connecting to network and flashes yellow when u loose network ( u can also use butler) the latest version of butler is really very good.... it helps with a lot of things... u can have an iphone style keygaurd unlock.... u can set LEDs as per ur liking etc....my phone flashes slow orange light in standby and flash fast green on miss calls or wen there is an incoming call.... it even alerts at set intervals for missed calls or unread messeages.... pretty cool.... Share this post Link to post Share on other sites
kets4u 3 Report post Posted October 17, 2008 Dhirajbhai need ur help.... This card reader doesnot seem to work..... when i put 8 gb card in the reader nd in usb port aft a sec it stps reading and says insert in F drive.... I tried putting in WMA on card but it doesnot read in the phone.... When i try doing it by inserting it IN phone the sync shows No card.... how on earth do i transfer WMA and Mpeg Files??? Share this post Link to post Share on other sites
dkaile 1,051 Report post Posted October 17, 2008 (edited) Something is wrong with your card. Try reformatting it in some other computer, if that does not work, u will have to reflash it at some neighbourhood electronic shop or search for some reflash/reformat tool on the internet. and BTW are u using a SDHC card reader, as original sandisk 8 gb cards come with attached usb reader, because 8GB cards can only be read by SDHC card readers and not the normal ones, try changing ur reader also... Edited October 17, 2008 by dkaile Share this post Link to post Share on other sites
kets4u 3 Report post Posted October 17, 2008 Something is wrong with your card. Try reformatting it in some other computer, if that does not work, u will have to reflash it at some neighbourhood electronic shop or search for some reflash/reformat tool on the internet.and BTW are u using a SDHC card reader, as original sandisk 8 gb cards come with attached usb reader, because 8GB cards can only be read by SDHC card readers and not the normal ones, try changing ur reader also... Dhirajbhai,,, its Sandisk card given by Saddikbhai.... and its the same Card Reader..... Share this post Link to post Share on other sites
dkaile 1,051 Report post Posted October 17, 2008 Better try on some other computer to format, if that does not work, talk to sadikk... Share this post Link to post Share on other sites
ami1 237 Report post Posted October 17, 2008 No you will not lose reliance settings etc. I have just updated yesterday. Just use NVBackup to make a backup first and then connect with cable to PC and run the sprint file on pc. It will give directions for the rest. Don't forget to nvbackup as apps/contacts etc. will be erased so you will need to install nvbackup after the rom update and then do restore by selecting the backup you made (on the sd card) Share this post Link to post Share on other sites
dkaile 1,051 Report post Posted October 17, 2008 Has anyone updated to Treo755p-1.07-SPNT available on Palm website ? Will all settings etc be lost if one updates to this ? No Problems at all.... I have done it on one of my Treos from 1.04 to 1.07....Just follow instructions as it is from Palm website..... As for settings and backup u can use NV backup to backup all your data and programs and messages etc... and restore once updated or everything will be back once restored. Share this post Link to post Share on other sites
Mufaddal 678 Report post Posted October 17, 2008 was goin to mention about fat32 format......good one dhirajalso speaking of leds ......treo 755p is programmed to blink only to indicate alerts or charge status......but if u want it to blink to show the network status like in previuos treos or like htc devices heres an application it blinks green on connecting to network and flashes yellow when u loose network ( u can also use butler) the latest version of butler is really very good.... it helps with a lot of things... u can have an iphone style keygaurd unlock.... u can set LEDs as per ur liking etc....my phone flashes slow orange light in standby and flash fast green on miss calls or wen there is an incoming call.... it even alerts at set intervals for missed calls or unread messeages.... pretty cool.... i already mentioned that u can use butler also for thsi purpose....but those who jus want the led functionality can use serivice led ......it does the same hing what butler does but without the other functions to update from 1.04 to 1.07 simply go on to plam webisite....all instructions r given...use nv backup to back up all ur data and settings and u need to run the desktopupdater.exe file Share this post Link to post Share on other sites
dkaile 1,051 Report post Posted October 17, 2008 (edited) Here is the link of a nice video (not for the faint of heart) to open up your 755p to replace your housing or damaged screen - Edited October 17, 2008 by dkaile Share this post Link to post Share on other sites
