Dr.Gagan 17 Report post Posted November 19, 2009 (edited) hi Tarun dont have an answer to your qustion but an observation. I am using AIRTEL Bis on 8830 for quite some time and have never got edge or EDGE displayed it always is GPRS or gprs. At same time in same location my colleagues BB bold shows EDGE Edited November 21, 2009 by Dr.Gagan Share this post Link to post Share on other sites
tarun_kabra 204 Report post Posted November 20, 2009 (edited) hi Tarun dont have an answer to your qustion but an observation. I am using Bis on 8830 for quite some time and have never got edge or EDGE displayed it always is GPRS or gprs. At same time in same location my colleagues bb bold shows EDGE Thanks for observation, Dr Gagan. On which network are your colleagues? Why we can't get EDGE on our BB8830. I don't think it is a handset issue, BB8830 should be EDGE compatible. Anybody else getting EDGE on their BB8830, please respond. Regrads Edited November 28, 2009 by tarun_kabra Share this post Link to post Share on other sites
anuragz 4 Report post Posted November 21, 2009 @Tarun Can u test this call waiting beep option for me ? Just dial Cstomer care from ur Blackberry & from another phone call ur BB. If u'll hear the 'beep' that means it is working fine. Which OS version do u have on BB ? Generally in GSM phones dial *43# to activate call waiting & #43# is for deactivation. You are right Anurag, there is no beep for call waiting, though call waiting is working. Very strange problem, I looked for many other forums but couldn't even find any one posting any such problem. I will try some alert software like berrybuzz and alikes, let see if any of these helps. I also found one software called Missedcall on website "www.barrymax.cn" (Chinese website) but I couldn't get myself registered for downloading that. Please try if you can get that software, it may help us. one more thing you will get the call waiting option in the cdma mode on bb 8830 but not on gsm mode. anyway that option doesn't help as I think it has the codes / dialing for sprint network Tarun Tarun I'v searched & found that many other users are also facing the same problem. But in none of the forums there was'nt any solution to this problem, the only conclusion which they had reached was to 'contact your service provider'. I dont thoink that any third party software is going to work. The only solution could be installing another version of OS. I just wanted to find out that Does 4.2 version users are also facing same problem ??? Is anyone there using vesion 4.2 on Blackberry 8830 ???? Are there other users on Rimweb facing same problem ? I just dont understand that why just a very basic feature which even works on a third grade cheap 500 Rs chinese phone, does not being supported by a Blackberry Smartphone ? Any replies from the experts ??? Sadikk, Dr Mudaffal, Arun................!!!!!!!!!!!!!! So Finally I found the solution for this Call waiting trouble. First I flashed my 8830 & downgraded to Sprint ver 4.2.2.123 but in this ver there was a big error in call waiting. Although i was able to hear the call waiting 'beep' but as soon as the 2nd caller disconnects his call my first call automatically used to go to speakerphone & there was no way through which i could shut the speakerphone the only way was to pull the battery & restart. Then I upgraded to ver 4.2.2.196 (sprint). In this ver Call Waiting is working perfectly fine, I can hear the 'beep', i can take the second call, i can also go back to first call. So if u really don't want to miss any calls u have to install ver 4.2.2.196 The other benefits of this 4.2 OS which i found good over ver 4.5 are 1. Very good battery life. In ver 4.5 10% battery used to drain out in 1hr but in this OS i dont need to charge for 3 days. 2. The os is fast, it does not takes time in opening dierent applications. 3. Almost all applications are working fine like Gmail, Google Sync, gmaps, browsers, Gtalk , nimbuzz etc. Only few themes dont work. 4. Call waiting is working Perfectly fine on OS 4.2.2.196, which is a very essential feature. If u want to install this 4.2 os it is advisable to also downgrade ur Desktop Manager to ver 4.2 Share this post Link to post Share on other sites
Greatest 55 Report post Posted November 21, 2009 ^^^ good info dude... But i had a major problem in 4.2... I was not able to send or receive SMS from my reliance number... A friend of mine also had the same problem... he was not able to send/receive sms from his BB8830 OS4.2... Is there any patch or something which makes the SMS work in 4.2?? I would also love to come back to 4.2... Share this post Link to post Share on other sites
sgiitk 32 Report post Posted November 21, 2009 Is it a correct assumption that a Blackberry flashed with the Reliance BIOS will be functionally indistinguishable from an identical unit bought from Reliance. Share this post Link to post Share on other sites
amit.shippie 135 Report post Posted November 22, 2009 (edited) There's one more thing i'v noticed that my 'Flash messages' ( the msg that flash bill amt or balance amt on screen when u dial a code no like *444# , *147# etc. [no depends on service provider]) This flash msg sometimes displays result on screen & sometimes rater than processing the no. it actually dials the no. & the reply says no. invalid. same problem with me... flash msgs in my blackberry also not working.....smtimes it works when i choose DIAL FROM HOME SCREEN YES....but not everytime.... any solution techies.... Edited November 22, 2009 by amit.shippie Share this post Link to post Share on other sites
rajendra.jindal 0 Report post Posted November 22, 2009 HELLO EVERYONE, I AM PLANNING TO BUY BLACKBERRY 8330 CURVE IN FEW DAYS. I AM GOING TO USE IT WITH TATA INDICOM. PLEASE TELL ME FUNCTIONS THAT DO NOT WORK WHEN TATA INDICOM CONNECTION IS USED IN (SPRINT) UNLOCKED BLACKBERRY. ALSO PROBLEMS THAT GENERALLY ARISES IN BLACKBERRY HANDSETS(SPECIALLY BB 8330 CURVE) IN REGULAR USE. CURRENTLY I AM USING NOKIA 6275,BEFORE THAT I USED MOTOROLA MOTO Q. PLEASE TELL ME WHETHER MY DECISION OF MOVING TO BLACKBERRY IS RIGHT OR NOT?? WAITING FOR REPLY... Share this post Link to post Share on other sites
coolminilife 6 Report post Posted November 26, 2009 Hi All, Facing few Problems on my BB8830, Expert's help required. After uninstalling Opera Mini 5.0 Beta Problem 01. my BB Browser is gone, can’t download anything OTA. although my opera mini and bolt are working fine. Problem 02. When I am surfing via gprs I can’t make calls, it says (Authorization failed)(Sometimes even after closing my browser, it works only after battery pull) but I can receive calls. BB8830 (Sprint) from Ebay Environment Ver 4.5.135 Aircel Mumbai Prepaid My PC Environment XP Home SP2 BB Desktop Manager 4.7 (Without Media Manager) I have successfully enabled gprs and BB Browser via Ashoksoft’s this post http://www.rimweb.in/forums/topic/19566-blackberry-8830-review-and-hacks/ Then I successfully enabled Tethering via Dr. mufaddal’s this post Then Downloaded and installed Bolt 1.5 >Working fine. Then Downloaded and installed Opera Mini 4.2 >Working fine. Then Downloaded and installed Opera Mini 5.0 Beta >Not sure it was working as I find it a bit heavy for my mobile. So I uninstalled Opera Mini 5.0 Beta restarted my BB.. and problem starts *Thanx and Regards to Dr. Muffadal, Ashoksoft and others for sharing valuable information. Share this post Link to post Share on other sites
Mufaddal 678 Report post Posted November 27, 2009 reload service books and get browser back Share this post Link to post Share on other sites
coolminilife 6 Report post Posted November 27, 2009 reload service books and get browser back Thanx Dr. for ur reply I did restore via desktop manager, but still cant see bb browser. I couldn't do the legacy restore as i cant type anything in service book option.. although i tried caps on + SEBE, I already have two entries in service book > Wap Push Config and Email[CMIME] Share this post Link to post Share on other sites
tarun_kabra 204 Report post Posted November 27, 2009 (edited) reload service books and get browser back Hi Mufaddal, Nice to see you back. Can you please check post no. 50 to 53, I am still not able to resolve those issues. Apart from these, I am facing a few more issues: 1). Is it possible to increase the default attachment size of mails i.e. 2.9 MB; 2). In my Nokia 6265, when I used its inbuilt call barring feature, it allowed me to block calls in a way that the caller was not even able to reach to me and got the message of busy or not reachable and even I didn't come to know about who is calling (which I think was a perfect "Do not Disturb"). I tried all the call barring software posted here and on other forums also but none of those give such output. Is it possible to have barr the calls in the way of Nokia 6265. Regards Tarun Edited November 27, 2009 by tarun_kabra Share this post Link to post Share on other sites
coolminilife 6 Report post Posted December 23, 2009 Hi All, I have successfully enabled gprs and BB Browser via Ashoksoft’s this post http://www.rimweb.in...view-and-hacks/ But every time i swap another sim.. Then i have to re-load service books again through "legacy Restore" mode, though i can surf through opera 4.2 and bolt 1.6 and can do teether via PC.. But i cant see and use BB Browser until i Reload service books. I am Using Windows XP SP Desktop Manager 4.7 BB 8830 With 4.5.135 Help required.. As i do Swap my sim's as per my roaming requirements. Thanx and Regards Share this post Link to post Share on other sites
amit.shippie 135 Report post Posted December 25, 2009 as per my knowledge there is no solution for this may b Dr. can help u.... Share this post Link to post Share on other sites
amit.shippie 135 Report post Posted December 25, 2009 i downloaded the gmail..but its not working...when i start the application i get the following error msg... Class 'net.rim.device.api.ui.TouchEvent' not found help!!!! Share this post Link to post Share on other sites
coolminilife 6 Report post Posted December 25, 2009 (edited) Hi All, I have successfully enabled gprs and BB Browser via Ashoksoft’s this post http://www.rimweb.in...view-and-hacks/ But every time i swap another sim.. Then i have to re-load service books again through "legacy Restore" mode, though i can surf through opera 4.2 and bolt 1.6 and can do teether via PC.. But i cant see and use BB Browser until i Reload service books. I am Using Windows XP SP Desktop Manager 4.7 BB 8830 With 4.5.135 Help required.. As i do Swap my sim's as per my roaming requirements. Thanx and Regards hey guys.. if the solution for the above problem is there in the forum then pls someone post the link.. (though i have search all, but cant find any), Moderators .. Seniors.. Experts...Dr.'s.. pls help.. :| Edited December 25, 2009 by coolminilife Share this post Link to post Share on other sites
chintan1 6 Report post Posted December 28, 2009 (edited) Dude i never faced this problem ...even i also do swap sims between Aircel & RGSM ..browsers remains ..no need to reload service books ..I guess there you need to lock your service books ...so that it wont disappear ..even i had this issue when we load any apps thru app loader .. refer below link u might get your problem solved .... Browser Edited December 28, 2009 by chintan1 Share this post Link to post Share on other sites
Mufaddal 678 Report post Posted January 1, 2010 btw which service books are u using?? there are 2 service books in the folder Share this post Link to post Share on other sites
tarun_kabra 204 Report post Posted January 1, 2010 @Tarun Can u test this call waiting beep option for me ? Just dial Cstomer care from ur Blackberry & from another phone call ur BB. If u'll hear the 'beep' that means it is working fine. Which OS version do u have on BB ? Generally in GSM phones dial *43# to activate call waiting & #43# is for deactivation. You are right Anurag, there is no beep for call waiting, though call waiting is working. Very strange problem, I looked for many other forums but couldn't even find any one posting any such problem. I will try some alert software like berrybuzz and alikes, let see if any of these helps. I also found one software called Missedcall on website "www.barrymax.cn" (Chinese website) but I couldn't get myself registered for downloading that. Please try if you can get that software, it may help us. one more thing you will get the call waiting option in the cdma mode on bb 8830 but not on gsm mode. anyway that option doesn't help as I think it has the codes / dialing for sprint network Tarun Tarun I'v searched & found that many other users are also facing the same problem. But in none of the forums there was'nt any solution to this problem, the only conclusion which they had reached was to 'contact your service provider'. I dont thoink that any third party software is going to work. The only solution could be installing another version of OS. I just wanted to find out that Does 4.2 version users are also facing same problem ??? Is anyone there using vesion 4.2 on Blackberry 8830 ???? Are there other users on Rimweb facing same problem ? I just dont understand that why just a very basic feature which even works on a third grade cheap 500 Rs chinese phone, does not being supported by a Blackberry Smartphone ? Any replies from the experts ??? Sadikk, Dr Mudaffal, Arun................!!!!!!!!!!!!!! So Finally I found the solution for this Call waiting trouble. First I flashed my 8830 & downgraded to Sprint ver 4.2.2.123 but in this ver there was a big error in call waiting. Although i was able to hear the call waiting 'beep' but as soon as the 2nd caller disconnects his call my first call automatically used to go to speakerphone & there was no way through which i could shut the speakerphone the only way was to pull the battery & restart. Then I upgraded to ver 4.2.2.196 (sprint). In this ver Call Waiting is working perfectly fine, I can hear the 'beep', i can take the second call, i can also go back to first call. So if u really don't want to miss any calls u have to install ver 4.2.2.196 The other benefits of this 4.2 OS which i found good over ver 4.5 are 1. Very good battery life. In ver 4.5 10% battery used to drain out in 1hr but in this OS i dont need to charge for 3 days. 2. The os is fast, it does not takes time in opening dierent applications. 3. Almost all applications are working fine like Gmail, Google Sync, gmaps, browsers, Gtalk , nimbuzz etc. Only few themes dont work. 4. Call waiting is working Perfectly fine on OS 4.2.2.196, which is a very essential feature. If u want to install this 4.2 os it is advisable to also downgrade ur Desktop Manager to ver 4.2 Finally I got call waiting beep on my bb8830 with os 4.5.175. But I am still clueless about what went wrong earlier and what new I have done now which lead to resolve this call waiting issue. The only new thing I remind is that I am using a shirnked os and not all the components of os 4.5.175. I had removed the default themes, unused languages, voice activated dialing and a few more from my original os 4.5.175 to gain more memory and after that it started working. But I do not see any direct link of shrinking the os and resolution of this call waiting problem. Any way its working now. ------------------------------------------------------------------------------ Posted from my bb 8830 without BIS on my Aircel gprs and BB Browser. Share this post Link to post Share on other sites
coolminilife 6 Report post Posted January 15, 2010 Dude i never faced this problem ...even i also do swap sims between Aircel & RGSM ..browsers remains ..no need to reload service books ..I guess there you need to lock your service books ...so that it wont disappear ..even i had this issue when we load any apps thru app loader .. refer below link u might get your problem solved .... Browser Hey Dude, Help me with ur serice books .. tel me which one r u using... and how do u lock service books.. Reference post.. Share this post Link to post Share on other sites
chintan1 6 Report post Posted January 20, 2010 Dude i am using same service book provided by Ashok in 1st post itself ...try loading it twice ...& i didn't do anything for locking it while swapping sim card Share this post Link to post Share on other sites
chintan1 6 Report post Posted January 20, 2010 Finally I got call waiting beep on my bb8830 with os 4.5.175. But I am still clueless about what went wrong earlier and what new I have done now which lead to resolve this call waiting issue. The only new thing I remind is that I am using a shirnked os and not all the components of os 4.5.175. I had removed the default themes, unused languages, voice activated dialing and a few more from my original os 4.5.175 to gain more memory and after that it started working. But I do not see any direct link of shrinking the os and resolution of this call waiting problem. Any way its working now. ------------------------------------------------------------------------------ Posted from my bb 8830 without BIS on my Aircel gprs and BB Browser. Tarun bhai ..after loading many Os what i feel is Os 4.2.2.196 is the most stable ...with all features ... Share this post Link to post Share on other sites
amit.shippie 135 Report post Posted February 25, 2010 (edited) desktop manager and bmc is not detecting my blackberry.... is it data cable problem???.... on the other hand it still getting charge when connected to my laptop.... and also one more problem...from the very first day i bought it i m not able to connect to DM VIA BLUETOOTH.... plz help... Edited February 25, 2010 by amit.shippie Share this post Link to post Share on other sites
Mufaddal 678 Report post Posted February 25, 2010 try on other pc when u connect ur usb cable u should hear a "ding" Share this post Link to post Share on other sites
amit.shippie 135 Report post Posted February 26, 2010 it worked in other laptop...one more strange thing i can connect to DM via blurtooth in tht.... may be due to vista... tht is vista basic n mine is premium..... Share this post Link to post Share on other sites
savramesh 37 Report post Posted March 17, 2010 How to transfer number from balckberry to a new UIM ? Can i use HCC card ? When i tried calling *229xxxxxxxxx from blackberry it says "Request for missed call alert deactivation has been accepted".. Share this post Link to post Share on other sites