How To Get Data On Palm

[girish_sahu 0]

^^^

you are on which version of WebOS ?

Sir,

palm webOS 1.4.5

[::Hitesh:: 1,763]

scan area 0x00A50000-0x00A60000

[::Hitesh:: 1,763]

or 0753:075F

[girish_sahu 0]

scan area 0x00A50000-0x00A60000

sir, how to scan the area?

do you mean scan memory?

if this is memory, then CDMA workshop has in different format, like

start address:0000:0000

end address:FFFFFF

sir pls tell the full procedure also.

I apologize sir if you have already posted the method somewhere, i am doing first time.

[::Hitesh:: 1,763]

0x00A50000 = 00A5:0000

0x00A60000 = 00A6:0000

if you cant understand above, you are not eligible to do anything to your phone !!

[girish_sahu 0]

0x00A50000 = 00A5:0000

0x00A60000 = 00A6:0000

if you cant understand above, you are not eligible to do anything to your phone !!

Sir,

in memory tab-->scan memory section

i put start address :00A5:0000

end address:00A6:0000

sizes(byte)=65536 (Default)

when i click on read button

one message come: Unreadable area from:00A5:0000

&

memory tab-->Memory/Eeprom section

Entered Start address=0753:075F

sizes(byte)=65536 (Default)

when click on 'Read' Button, it has read uptp 67%, after that error has come

"process is stopped. phone does not answer"

tried this process so many times, but didn't complete upto 100%.

i opened bin file in winhex, all values were 0, no other values were there.

[::Hitesh:: 1,763]

give me your readable and unreadable areas

[cdmaexpert 2]

For data. Use. Nvdump without spc.

[tanmaykumar 0]

i have palm pixi Verizon on tata network. & done all these seeting.. but still 1x logo has not come.

in ppp tab , UM and AN TABS and have written mobile number in username and password , is this correct.

Detail process that i have done, pls check, is this correct

1) opened qpst and given spc code 000000 , then it has read the phone
2) gone in mip tab and in "mobile ip behaviour" then "simple ip only" ( already selected)
3) In user profiles , clicked on profile 1 and press edit
4) profile 1 edit screen , clicked tab profile enable
5) in NAI write xyz@sprintpcs.com
6) teethered NAI xyz@modem sprintpcs.com
7) checked rev tunnel preferred
8) made primary HA HOME HA AND SECONDARY HA ADDRESS 0.0.0.0
9) pressed ok and write to phone

10)Gone in ppp tab, then UM and AN TABS and written username and password

username - <mobile no>
password- <mobile no>
11) then dialed ##evdo# and selected 1xrtt

12) then dialed ##data#

then browser and PRIMARY /SECONDAY NCG to 0

13) data usage is On

Phone Rebooted automatically and manually , but 1x icon didn't come.

OK
so here is a simple to do guide to get 1x data on palm pre for reliance and also for tata

[::Hitesh:: 1,763]

try profile zero

Better try QNC from other thread ..

Edited October 26, 2013 by ::Hitesh::

[tanmaykumar 0]

try profile zero

Better try QNC from other thread ..

i have opened 1xData_tata_pixiplus.qcn file ( that is provided in other fourm). as per this file , configured for my palm pixi

but still 1x data is not coming.

Attaching image of my configuration, pls check, is this correct? is something wrong !!

MIP Setting

Profile 0

Profile 1

Profile 2

PPP Config (UM)

PPP Config (AN)

Edited October 28, 2013 by tanmaykumar

[::Hitesh:: 1,763]

^^^

try switching profile 0 to 1 and back to 0, every time write and phone will reboot

also you can try data on off app from palm store.

[tanmaykumar 0]

^^^

try switching profile 0 to 1 and back to 0, every time write and phone will reboot

also you can try data on off app from palm store.

hitesh,

Tried this also. but not working.

what to do now?

[::Hitesh:: 1,763]

Put NAI = internet

see if it sticks

[tanmaykumar 0]

Put NAI = internet

see if it sticks

hitesh, i have put this also, then data off-on and selected 1xrtt & rebooted.

but still no luck...