Using Rcdma Number In Fwp Classic 2258

[::Hitesh:: 1,763]

I have successfully converted my FWP Classic 2258 to RUIM base,

This set was laying with me from long time without any use,

Now i can use any RCDMA sim card with 93 number in FWP.

Just took 5 min to do all process

Also TATA sim can be used in it, after uploading TATA prl.

[konquerror 21]

Can you give more details like how you did it, what tools did you use etc. etc.?

[::Hitesh:: 1,763]

I can provide all info,

But dose our forums rules allow us to do so?

Admin Plz help, should i post full details here?

Edited October 28, 2009 by hitesh123

[konquerror 21]

Anything except ESN would be fine I think...

[ramtech 47]

I have ZTE MG880 1X data card lying which has disconnected nearly 10months back.Can some one provide information on how to unlock it to use it with Reliance or TATA UIM Card

Thanks in advance

[::Hitesh:: 1,763]

Anything except ESN would be fine I think...

Need CDMA Workshop and Data cable driver

( Data cable and driver CD comes free with this FWP)

[::Hitesh:: 1,763]

I have ZTE MG880 1X data card lying which has disconnected nearly 10months back.Can some one provide information on how to unlock it to use it with Reliance or TATA UIM Card

Thanks in advance

I never used this card, so dont have details with me

but can be done with CDMA Workshop.

Give me more details and i will try to you the steps to solve it.

[Greatest 55]

@hitesh, you can provide a comprehensive step-by-step guide in this forum.... It is not against the rules... make sure you do not mention your e$n anywhere...

[rangasamy 0]

Hitesh, I sent you a PM for help. please reply me. thanks ..

[::Hitesh:: 1,763]

""@hitesh, you can provide a comprehensive step-by-step guide in this forum.... It is not against the rules... make sure you do not mention your e$n anywhere...""

I know about ESN and MEID, both can be missused, so no worry

[Greatest 55]

^^

[supernova 47]

from where to get cdma workshop

[::Hitesh:: 1,763]

for FWP you dont req latest version, even 2.7 ver is ok,

You can search rapidshare or megaupload website for the same,

If you dont get PM me i will give u the proper working link.

[::Hitesh:: 1,763]

Here are the steps for Making Classic 2258 RUIM enable.

List of require things

1) win 2k or XP PC with USB port

2) Data cable of FWP 2258 with drivers (both comes free with FWP)

3) CDMA workshop 2.7

Step -1

Do all physical connections and install data cable drivers,

It will create a virtual Com port on your system.

(Say after installing driver it took com port 8)

Step -2

close all application and start CDMA workshop.

From Main screen select com port 8 (or select your port which connected to your FWP)

Then click CONNECT.

Then click on READ.

Step-3

Select SECURITY tab,

In SPC, Select Universal EFS Method.

Then click on READ.

One box will pop up, Select NVM_0002.

Then click on OK.

You will see one screen with lots off dots, in between dots you will see continues 6 digits.

(It will be like ............320530......)

Write down these 6 digits, This is your SPC code.

Click on OK and close the SPC screen.

In SPC box type the 6 digit SPC code. and click SPC button.

Step-4

Select "OTHER" Tab

In R-UIM section

Select Config = R-UIM only and click on WRITE.

One box will appear it will say programing successful . . then click on OK.

Step - 5

After completing step -4 , close CDMA workshop, Switch off your FWP,

insert R-UIM and power ON your FWP.

And you are done.

[parin 857]

thanks for the great info