dkaile 1,051 Report post Posted May 23, 2010 ^ post your relevant screenshots of qpst for guidance to others... Share this post Link to post Share on other sites
dpinal 2 Report post Posted May 23, 2010 Following where I did Change today Share this post Link to post Share on other sites
Arun 795 Report post Posted May 23, 2010 @dkaile: Firmware version: 2.1-update1 Baseand version: 2.42.01.04.27 Kernel version: 2.6.29.-bc0d2cff htc-kernel@and18-2 #1 Build number: 2.27.651.5 CL 169236 release-keys Software number: 2.27.651.5 PRI version: 2.20_003 PRL version: 00005 wierd, I never had to change anything after the upgrade to have data working Share this post Link to post Share on other sites
kshah 452 Report post Posted May 23, 2010 Why one need to change any thing for data to.work? Unless prI is reset or data services were not configured before update. IMHO Share this post Link to post Share on other sites
dkaile 1,051 Report post Posted May 23, 2010 ^ ixactly... Share this post Link to post Share on other sites
doc_anurag 46 Report post Posted May 23, 2010 (edited) @dkaile ji muje nahi bhul jaiyega. I tried as per dpinal but no internet. Again i have noticed that under MIP he has a second profile configured while mine is blank. Kya ye reason hai for my phone not connecting. I have put screenshots of my setting , pls see and advice sunny: And when i check under the set profile i get this this is the difference between my phone and both dpinal and sunny. All other setting i have matched and seen but the net refuses to connect. Edited May 23, 2010 by doc_anurag Share this post Link to post Share on other sites
@mitJ@in 256 Report post Posted May 23, 2010 ^^^ Always hide your personal information parameters while uploading any screenshot. Share this post Link to post Share on other sites
doc_anurag 46 Report post Posted May 23, 2010 ^^^ Always hide your personal information parameters while uploading any screenshot. Thanks for pointing that out. shots edited. Share this post Link to post Share on other sites
dkaile 1,051 Report post Posted May 24, 2010 (edited) ^ make pri and sec ha all 0.0.0.0 in 3rd screenshot and it will work Edited May 24, 2010 by dkaile Share this post Link to post Share on other sites
doc_anurag 46 Report post Posted May 24, 2010 ^ make pri and sec ha all 0.0.0.0 in 3rd screenshot and it will work I made all of them 0.0.0.0 but its the same no change it doesnt connect. Please advice further. Share this post Link to post Share on other sites
dkaile 1,051 Report post Posted May 24, 2010 ^ Arrey Bhaiyya Anurag ji; dang se sari settings phir se check karo; kahi na kahi tumne galti kar rakhi hai... Vo theek karte hi sab theek ho jaayega... Share this post Link to post Share on other sites
dpinal 2 Report post Posted May 24, 2010 (edited) ^ make pri and sec ha all 0.0.0.0 in 3rd screenshot and it will work I made all of them 0.0.0.0 but its the same no change it doesnt connect. Please advice further. write UTS@relianceinfo.com in 2nd profile of MIP tab and leave first row of profile as it is with 0.0.0.0. to all This will work I guess Edited May 24, 2010 by dpinal Share this post Link to post Share on other sites
doc_anurag 46 Report post Posted May 24, 2010 My data is working fine now. I entered UTS@relianceinfo.com as my NAI in the 1st profile and then configured the rworld username and password in ppp um tab and voila my internet is now working. ] Thanks to all for bearing with me and solving this. Special thanks to @dkaile ji for instructing me step by step and guiding me throught the whole process. and @dpinal for give me that last crucial settings. Share this post Link to post Share on other sites
Hellangelo 2 Report post Posted May 24, 2010 (edited) My data is working fine now. I entered UTS@relianceinfo.com as my NAI in the 1st profile and then configured the rworld username and password in ppp um tab and voila my internet is now working. ] Thanks to all for bearing with me and solving this. Special thanks to @dkaile ji for instructing me step by step and guiding me throught the whole process. and @dpinal for give me that last crucial settings. Strangely, I have done almost everything that you have done, including the same mistakes, and corrections, I still can't connect!! Edit: My MEID is not 000000000, do you think that would make any difference? Also, I get an error, when I write to phone saying The mobile reported the following errors while writing NV items: "NV Item: NV_UE_IMEI_I and Status:NV_READONLY_S" Edited May 24, 2010 by Hellangelo Share this post Link to post Share on other sites
SumitVerma 187 Report post Posted May 24, 2010 Edit: My MEID is not 000000000, do you think that would make any difference? Also, I get an error, when I write to phone saying The mobile reported the following errors while writing NV items: "NV Item: NV_UE_IMEI_I and Status:NV_READONLY_S" Dude! IMEI? on a cdma phone? I think you are doing something wrong there. Share this post Link to post Share on other sites
coolboyashok 23 Report post Posted May 24, 2010 My Data is also working fine now.thanks a lot to all gurus... Share this post Link to post Share on other sites
Hellangelo 2 Report post Posted May 24, 2010 Edit: My MEID is not 000000000, do you think that would make any difference? Also, I get an error, when I write to phone saying The mobile reported the following errors while writing NV items: "NV Item: NV_UE_IMEI_I and Status:NV_READONLY_S" Dude! IMEI? on a cdma phone? I think you are doing something wrong there. Thats what baffled me! QPST is selecting the correct phone and stuff, but when I write it gives me this error, isnt it funny? Share this post Link to post Share on other sites
SumitVerma 187 Report post Posted May 24, 2010 ^ What are you trying to write from QPST? Share this post Link to post Share on other sites
doc_anurag 46 Report post Posted May 24, 2010 (edited) My data is working fine now. I entered UTS@relianceinfo.com as my NAI in the 1st profile and then configured the rworld username and password in ppp um tab and voila my internet is now working. ] Thanks to all for bearing with me and solving this. Special thanks to @dkaile ji for instructing me step by step and guiding me throught the whole process. and @dpinal for give me that last crucial settings. Strangely, I have done almost everything that you have done, including the same mistakes, and corrections, I still can't connect!! Edit: My MEID is not 000000000, do you think that would make any difference? Also, I get an error, when I write to phone saying The mobile reported the following errors while writing NV items: "NV Item: NV_UE_IMEI_I and Status:NV_READONLY_S" I also get the same error everytime I write data to the phone. I just ignored it and nothing happened . Edited May 24, 2010 by doc_anurag Share this post Link to post Share on other sites
dkaile 1,051 Report post Posted May 24, 2010 that error is inconsequential; kindly ignore it.... and it will write to ur phone, dont worry... Share this post Link to post Share on other sites
doc_anurag 46 Report post Posted May 24, 2010 (edited) Interesting observation If we use the username sam1 under ppp um tab, mobile internet works but on trying to access the r world home page one keeps getting access denied error. But if we use UTS@relianceinfo.com we can use the net and access the home page. Edited May 24, 2010 by doc_anurag Share this post Link to post Share on other sites
Mufaddal 678 Report post Posted May 25, 2010 the nvitem imei error is going to happen in hero as well as incredible every time u write anything its non significant and inspite of error the nvitems are written on handset Interesting observation If we use the username sam1 under ppp um tab, mobile internet works but on trying to access the r world home page one keeps getting access denied error. But if we use UTS@relianceinfo.com we can use the net and access the home page. its the same thing with sprint blackberries as well Share this post Link to post Share on other sites
dkaile 1,051 Report post Posted May 25, 2010 (edited) Now that data et al is working for all, I would like to request users on 2.1 to post their small reviews about the new OS; parameters - speed, functions, usability, new features, features missing, etc... for the benefit of other users who are waiting to upgrade... I would also recommend users that in case they are facing some issues, they hard reset their phones so that the OS is refreshed, now that we know all the settings... Edited May 25, 2010 by dkaile Share this post Link to post Share on other sites
kshah 452 Report post Posted May 25, 2010 Interesting observation If we use the username sam1 under ppp um tab, mobile internet works but on trying to access the r world home page one keeps getting access denied error. But if we use UTS@relianceinfo.com we can use the net and access the home page. That is because proxy port is not configured. UTS username do not use proxy as its WM username. Share this post Link to post Share on other sites
dsgandhok 0 Report post Posted May 25, 2010 yes i must admit that the new os is snappier and fast but lacks some critical features from the past os . like in the past os we had an option of keeping data always on or when required. which is missing in the new os. the new sense ui look cool...... but i had herd that the 2.1 comes with 3d navigation but i dont see any 3d navigation here. Share this post Link to post Share on other sites
