tanveer 59 Report post Posted January 3, 2010 As far as my unbilled usage is concerned, it does not show any unexpected increase though I do use data regularly. Will be sure only when I get my next bill. I am on DAPO however. I would like to know a couple of things more. I dont use google sync. Will I be able to sync my phone with outlook? Share this post Link to post Share on other sites
doc_anurag 46 Report post Posted January 3, 2010 This is very confusing!!. I would be getting my hero soon, Now my current plan is L1+99monthly internet plan. So now if i use my phone for surfing , mail etc i would be paying NUC or i would just have to pay the monthly rental. I have gone through my previous bills but have not seen any network charges applied till now, but the problem is i have just switched from DAPO to simple. Share this post Link to post Share on other sites
phonegeek 588 Report post Posted January 3, 2010 (edited) ^^^ be careful of the new plans they are bloody expensive was charged 25rs in just 12hrs of use after which i decided to switch off data on my hero and went back to GSM so bottomline is HEAVY USERS BE VERY CAREFUL IF UR DATA USAGE IS 2 /3 MB IN A DAY USE IT My data usage is 15-20mb in a day so for me its a no no So you mean CDMA users have no cheaper option ? Edited January 3, 2010 by saurabh159 Share this post Link to post Share on other sites
lijodavis 1 Report post Posted January 4, 2010 (edited) Can we add windows mobile plans to HTC hero? http://www.rcom.co.in/Rcom/personal/windows-mobile/tariff.html They have given cdma settings too.. http://www.rcom.co.in/Rcom/personal/windows-mobile/internetsettings.html They have given rates for 'Windows Mobile 500 MB' for Monthly Charge Rs 199, Allowed Monthly Usage 500 MB, Charges beyond Allowed Usage Rs 2 per MB. Just now called customer-care and their response is, we can add these plans to our existing voice plans for CDMA. Can some one clarify this point? Edited January 4, 2010 by lijodavis Share this post Link to post Share on other sites
tanveer 59 Report post Posted January 4, 2010 but what about network usage charges? Share this post Link to post Share on other sites
Maulik.Parekh 34 Report post Posted January 4, 2010 Hello Experts, Pl clarify ... RCOM has made everything so much confusing tht my head is Share this post Link to post Share on other sites
Mufaddal 678 Report post Posted January 4, 2010 ^^^ this is going off topic guys keep this thread for htc hero only if u want to discuss about data plans and usage there are alreday dedicated topics running for it Share this post Link to post Share on other sites
aces4a 0 Report post Posted January 5, 2010 Hello experts, Will the Sprint HTC Hero support OMH SIM cards, & EVDO speeds for data like the Samsung Corby Speed ? Regards, Raj Share this post Link to post Share on other sites
SumitVerma 187 Report post Posted January 5, 2010 @ mufaddal Thanks a lot for your review... Bought a Phone from dear Sadik and now I am sure this is one good handset to invest on. Share this post Link to post Share on other sites
sumatrix 1 Report post Posted January 5, 2010 sprint hero doesn has a sim slot.the no need to be programmed onto it Share this post Link to post Share on other sites
Mufaddal 678 Report post Posted January 6, 2010 @ mufaddal Thanks a lot for your review... Bought a Phone from dear Sadik and now I am sure this is one good handset to invest on. yes it is android power will post some good cracked apps soon Share this post Link to post Share on other sites
pasumark 51 Report post Posted January 6, 2010 sprint hero doesn has a sim slot.the no need to be programmed onto it The no. can be transferred by using HCC or is it some other complicated process? Share this post Link to post Share on other sites
lijodavis 1 Report post Posted January 8, 2010 Received Hero from sadik yesterday.Thanks all for helping me to take this decision. Its an excellent handset regrading call quality,reception etc.lack of keyboard is a problem for me since i was using palm treo755p.but with usage its improving. Its getting connected to net by default.No need to setup anything.I have a few doubts regarding this: Please tell me where i have to put User name: SC810@wap.relianceinfo.com ? I have activated net plan "windows mobile 500 MB",for that you need to dial to #777 with username and pass as our mobile no.Where will i create this connection? or by default it like that? Please help. Share this post Link to post Share on other sites
phonegeek 588 Report post Posted January 8, 2010 (edited) Can we add windows mobile plans to HTC hero? http://www.rcom.co.i...ile/tariff.html They have given cdma settings too.. http://www.rcom.co.i...etsettings.html They have given rates for 'Windows Mobile 500 MB' for Monthly Charge Rs 199, Allowed Monthly Usage 500 MB, Charges beyond Allowed Usage Rs 2 per MB. Just now called customer-care and their response is, we can add these plans to our existing voice plans for CDMA. Can some one clarify this point? Has anyone able to use these plans on Hero ? Please also guide on how to activate this plan on Hero.. This is the only rescue to CDMA users who want to avoid NUC. Edited January 8, 2010 by saurabh159 Share this post Link to post Share on other sites
Mufaddal 678 Report post Posted January 8, 2010 ^^^ simple just connect your phone to qpst 2.7 build 323 go to ppp tab in un/an tabs write your username and password and click write 1 Share this post Link to post Share on other sites
lijodavis 1 Report post Posted January 9, 2010 ^^^ simple just connect your phone to qpst 2.7 build 323 go to ppp tab in un/an tabs write your username and password and click write i couldn't find link for build 323. but i got QPST_2.7.348.can i use this version? can you pm link for 323? Share this post Link to post Share on other sites
Mufaddal 678 Report post Posted January 9, 2010 yes use 348 u will need to put phone in diag mode for diag mode 1) download and install htc sync on ur pc 2) on phone dial ##3424# 3) connect phone to pc 4) slide open notification bar and press htc sync 5) it will say new hardware detected and ask for diag drivers 6) locate to driver folder and install drivers 7) go to device manager on pc and see which port your phone is connected to 8) open qpst go to qpst configurator 9) add ur com port to which phone is connected 10) now open service programming and press read from phone HTC Hero DIAG Drivers.rar 1 Share this post Link to post Share on other sites
abhilove1984 0 Report post Posted January 10, 2010 pls confirm can i use EVDO(reliance) on this handset? pls confirm can i use reliance & tata with nam1 & nam2 settings? Share this post Link to post Share on other sites
lijodavis 1 Report post Posted January 11, 2010 yes use 348 u will need to put phone in diag mode for diag mode 1) download and install htc sync on ur pc 2) on phone dial ##3424# 3) connect phone to pc 4) slide open notification bar and press htc sync 5) it will say new hardware detected and ask for diag drivers 6) locate to driver folder and install drivers 7) go to device manager on pc and see which port your phone is connected to 8) open qpst go to qpst configurator 9) add ur com port to which phone is connected 10) now open service programming and press read from phone Yes i did exactly what u said.but when writing to phone i got an error "NV_UE_IMEI_I NV_READONLY_S". i just ignored it.is this a problem?i tried connecting to net after this and it got connected.Thanks for your help. Share this post Link to post Share on other sites
Mufaddal 678 Report post Posted January 11, 2010 ^ no problems Share this post Link to post Share on other sites
Sadikk 301 Report post Posted January 11, 2010 i got an error "NV_UE_IMEI_I NV_READONLY_S". Latest QPST give this error.. though it has nothing to take with CDMA phones. IMEIs are concerned only with GSM handsets.. Share this post Link to post Share on other sites
Mufaddal 678 Report post Posted January 11, 2010 (edited) ^^^ its not coz of latest versions of qpst even old versions of qpst will give error u get this error coz some nvitems in chipset have permissions for read only , but those nv items are irrelevant as the ones we want to change take up new values when we press write thats y even after error , the changes u make are saved as far as imei goes qpst does support imei also for chipsets that are made by qualcomm which includes several gsm phones like lg viewty ku990 etc etc qualcomm makes dual band radio as well ( bb 8830, storm, tp2 etc) infact its lot better even than radio lab tool ...u know what i mean here TAC = first 6 digits of imei FAC = next 2 digits SNR = next 6 digits the last 15th digit is autocalculated by chipset Edited January 11, 2010 by mufaddal_km Share this post Link to post Share on other sites
dkaile 1,051 Report post Posted January 11, 2010 ^ yeh sab biwi naa hone kaa natija hai.... kewal technology me hi dimag rahta hai.... lol... Share this post Link to post Share on other sites
Mufaddal 678 Report post Posted January 11, 2010 lol waise bhi kuch hi mahine bache hai shaadi ko , uske baad to pata nahi rimweb kya aur hero kya Share this post Link to post Share on other sites
Sadikk 301 Report post Posted January 11, 2010 @ Muf well same thing i said.. as he was doing for Juke.. its ok.. otherwise on 8830 u use any version it gives same error.. But for Mogul and other HTC CDMA only phones for example Mogul, Touch, older version didnt gave any error.. and newer 232 is giving this error.. i try to explain this to noobs in simple language.. technically we understand... Thanks for explanations though.. @Dkaile.. Meri shadi ke baad main to 30 din ke honeymoon pe ja raha hu.. aaplog morcha sambhalna.. lol Share this post Link to post Share on other sites