Mufaddal 678 Report post Posted February 7, 2010 but if u can make calls/recieve calls send sms , i dont think its related to programming anyways u can check ur sid/nid search on forum u will get tata sid/nid pairs also check primary secondary channels but since its programmed by sadik who is selling hero everyday i dont think there would be error in this its handset problem ur modem is bad , this is evident that ur callers get switch off tone Share this post Link to post Share on other sites
SumitVerma 187 Report post Posted February 7, 2010 but if u can make calls/recieve calls send sms , i dont think its related to programming anyways u can check ur sid/nid search on forum u will get tata sid/nid pairs also check primary secondary channels but since its programmed by sadik who is selling hero everyday i dont think there would be error in this its handset problem ur modem is bad , this is evident that ur callers get switch off tone Is it a hardware issue or can it be resolved? And moreover as I have already specified there is only 1 SID/NID entered in the phone. where as in Tata Indicom Settings there are around 8 different SID/NID which I can see in my Diamond. How to enter more of them? Share this post Link to post Share on other sites
Mufaddal 678 Report post Posted February 7, 2010 just use qpst build 323 its been posted how to connect hero to qpst in hero thread read it and do it and then update us copy sid/nid fron ur diamond as is in hero Share this post Link to post Share on other sites
SumitVerma 187 Report post Posted February 7, 2010 just use qpst build 323 its been posted how to connect hero to qpst in hero thread read it and do it and then update us copy sid/nid fron ur diamond as is in hero Doing Right Now Sir! Share this post Link to post Share on other sites
SumitVerma 187 Report post Posted February 7, 2010 Just connected the phone to QPST and found out that all SID/NID are perfect.. Its just that phone shows just first one in ##786# Share this post Link to post Share on other sites
SumitVerma 187 Report post Posted February 7, 2010 These are my settings for SMS tabs, both SMS CB and SMS Share this post Link to post Share on other sites
SumitVerma 187 Report post Posted February 7, 2010 PPP Config. Share this post Link to post Share on other sites
Mufaddal 678 Report post Posted February 7, 2010 hmm , as i said before also i dont think its related to tata programming also u can do one thing ask some other user of tata who has hero ask him his settings in qpst i think its issue with ur baseband either do ##786# reset or else talk to sadik Share this post Link to post Share on other sites
SumitVerma 187 Report post Posted February 7, 2010 hmm , as i said before also i dont think its related to tata programming also u can do one thing ask some other user of tata who has hero ask him his settings in qpst i think its issue with ur baseband either do ##786# reset or else talk to sadik Yes Will Do so. I am sorry I am consuming a lot of time of you all but I am helpless as of now. If it would have been WM OS I could have done it easily. Thanks again for giving your precious time on this. But Will request you all to stay with this topic. Share this post Link to post Share on other sites
ashoksoft 83 Report post Posted February 7, 2010 Try backing up your contacts - and formatting the phone.. Without signing into google services / restoring via HTC sync ... try to receive a few texts (before contact DB is updated) and then see if it helps. It could be an error with contact names having non-supported ascii chars in it. Just a passing thought cheers karki Share this post Link to post Share on other sites
dkaile 1,051 Report post Posted February 7, 2010 ^ What an idea Karki... long time no see... welcome back and post more... Share this post Link to post Share on other sites
SumitVerma 187 Report post Posted February 7, 2010 (edited) Try backing up your contacts - and formatting the phone.. Without signing into google services / restoring via HTC sync ... try to receive a few texts (before contact DB is updated) and then see if it helps. It could be an error with contact names having non-supported ascii chars in it. Just a passing thought cheers karki Sir I just tried what you said but still there is nothing new happening.. same force close. Just realized that even the network signal goes with a cross mark and comes and then goes again and then come. Wonder Why am I always stuck with these stupid things. Edited February 7, 2010 by sumitvrma Share this post Link to post Share on other sites
Sadikk 301 Report post Posted February 7, 2010 have u tried ##786#?? Do it.. i did best programming tata phones have.. I think its somehow related to A-Key issue.. Try ##786# and let me know.. will see what can be done.. one of my friends and one more customer who using it on tata does not have any issue.. they both in mumbai though.. Share this post Link to post Share on other sites
SumitVerma 187 Report post Posted February 8, 2010 have u tried ##786#?? Do it.. i did best programming tata phones have.. I think its somehow related to A-Key issue.. Try ##786# and let me know.. will see what can be done.. one of my friends and one more customer who using it on tata does not have any issue.. they both in mumbai though.. Sadikk Bhai I can do the reset but I don't know the further programming. Could you please spend some time and either write it here or mail me the same. Share this post Link to post Share on other sites
Sadikk 301 Report post Posted February 8, 2010 Well it shud not reset ur MEID.. just note down ur MIN before doing anything.. in case it reset MEID.. let me know.. u will need Teamviewer.com ill do it online for ya.. Share this post Link to post Share on other sites
dkaile 1,051 Report post Posted February 8, 2010 (edited) ##786# reset will 100% reset your meid... tried and tested... qpst may also stop working for some programming parameters after doing this reset... Edited February 8, 2010 by dkaile Share this post Link to post Share on other sites
Mufaddal 678 Report post Posted February 8, 2010 Well it shud not reset ur MEID.. just note down ur MIN before doing anything.. in case it reset MEID.. let me know.. u will need Teamviewer.com ill do it online for ya.. i have done it twice now it will restore original meid and leave new pesn causing radio in bad state also after this u wont be able to write am/an in ppp in qpst ( though it doesnt matter at all , cdma workshop is always there) Share this post Link to post Share on other sites
kshah 452 Report post Posted February 8, 2010 but if u can make calls/recieve calls send sms , i dont think its related to programming anyways u can check ur sid/nid search on forum u will get tata sid/nid pairs also check primary secondary channels but since its programmed by sadik who is selling hero everyday i dont think there would be error in this its handset problem ur modem is bad , this is evident that ur callers get switch off tone Is it a hardware issue or can it be resolved? And moreover as I have already specified there is only 1 SID/NID entered in the phone. where as in Tata Indicom Settings there are around 8 different SID/NID which I can see in my Diamond. How to enter more of them? In tata its very important to enter all provisioning data. What you can do is make QPST file with all provisioning data - open QPST - select off line and select right phone / device) enter all privisionind data include PRL. SAve . Then connect phone - once connected to QPST, select QCN file made and write. If you get PRL write error, dont worry, you can always use CDMA workshop 2.7 to write PRL. Also choose right PRL in tata. Tata AFAIK, uses various PRL depending on region and in you do not have right PRL then roaming causes problem. Share this post Link to post Share on other sites
SumitVerma 187 Report post Posted February 8, 2010 ##786# reset will 100% reset your meid... tried and tested... qpst may also stop working for some programming parameters after doing this reset... Sir. Done the Reset Part and the results are: 1. MEID (Hex) which was before 00000000000000 has been changed to A100000******* 2. ESN (Hex) has remained the SAME. 3. MEID (Hex) has same last 8 digits that are in ESN Hex. 4. Phone is showing cross on network status. 5 SPC has been changed. Was set to zeros before but is now something else. i.e. ##DATA# can be viewed but cant be edited. Thats the result I have got as of now.. If you need any more details please tell me. Share this post Link to post Share on other sites
dkaile 1,051 Report post Posted February 8, 2010 ^ now contact sadikk for teamviewer support Share this post Link to post Share on other sites
Sadikk 301 Report post Posted February 8, 2010 smit please be ready with Qxdm and teamviewer installed.. ill do it for ya.. right now in meeting with SEBI.. will call as soon as am back.. thanks.. Share this post Link to post Share on other sites
SumitVerma 187 Report post Posted February 8, 2010 smit please be ready with Qxdm and teamviewer installed.. ill do it for ya.. right now in meeting with SEBI.. will call as soon as am back.. thanks.. Installed Both of the programs. Now just waiting for you. Hope this time this phone doesn't piss me off. Share this post Link to post Share on other sites
Greatest 55 Report post Posted February 8, 2010 ^^ SEBI... yaar tum kaha kaha pahunch jaate ho... Share this post Link to post Share on other sites
SumitVerma 187 Report post Posted February 8, 2010 Waiting for you Sadikk bhai. Share this post Link to post Share on other sites
SumitVerma 187 Report post Posted February 9, 2010 Sadikk Bhai Did the programming part, thanks to him. Now waiting for MIN no. and use the service. Hope everything is sorted. Share this post Link to post Share on other sites
