Genius 817 Report post Posted July 8, 2010 Mods :: Gurus :: Friends I am facing 2 head pounding problem in my BB storm 9530 1) Tried to convert MEID based to ESN - didnt work radio was not turning on, now the problem is when i am using as MEID when i dial the number the call matures after exact 20 sec, till 20 it shows dialing and exact @ 20 it gives a beep and connects. tried switching os from 0.99 to 0.66 and vice tried JL cmd wipe. nothing worked still 20 sec wait 2) Got the GSM unlock code going to Advanced>SIM card> shows No valid sim card, doing MEPD gives menu with all "Unknown" (sim,Network, Subset, Provider, Corporate) --- now typing MEP2 dose not give MEP window it goes back to Sim personalization menu,. Standby screen shows No sim card. now how i am i supposed to unlock without MEP window, am i missing any thing?? Let me know if u need any other info, TC Thanks in advance Share this post Link to post Share on other sites
parin 857 Report post Posted July 8, 2010 Verizon ----------> Virizon Share this post Link to post Share on other sites
Mufaddal 678 Report post Posted July 8, 2010 (edited) http://www.youtube.com/watch?v=B-KtyYMcYQM BTW U NEED TO HAVE SIM IN STORM Edited July 8, 2010 by Mufaddal Share this post Link to post Share on other sites
Genius 817 Report post Posted July 8, 2010 ^^ Yes doctor i am using other network (DOCOMO, Airtel, Voda) sim card - i dont have verizon sim with me, it dose not show any SIM says insert sim and in advanced sim menu not even ID do i need a verizon sim - can it be done by any other sim. MEP2 dose not shows the mep enter window - i have not exhausted the 10 attempts. Share this post Link to post Share on other sites
parin 857 Report post Posted July 8, 2010 i think i have the Verizon sim which came with my phone need to find if of any help will send you Share this post Link to post Share on other sites
puneet_july30 36 Report post Posted July 8, 2010 I have 2 Verizon sims. Do tell me you want it I can send it to you. Share this post Link to post Share on other sites
Genius 817 Report post Posted July 8, 2010 ^^ thanks Guys first let DR KMM or any one confrm tht it will solve the problem, shall let u kno Share this post Link to post Share on other sites
Genius 817 Report post Posted July 9, 2010 Problem of sim card detection solved, the card was loosely fit so i put a paper folded behind it - SOLVED now the card has been detected, but code not working, Did someone found problem of 20 sec delay. Share this post Link to post Share on other sites
Mufaddal 678 Report post Posted July 9, 2010 unless phones detects sim it wont show u unlock code box Share this post Link to post Share on other sites
::Hitesh:: 1,763 Report post Posted July 10, 2010 have u tried installing latest OS and then downgrade ? Share this post Link to post Share on other sites
Mufaddal 678 Report post Posted July 10, 2010 yes update to latest os may be since u using old os this issue Share this post Link to post Share on other sites
Mufaddal 678 Report post Posted July 10, 2010 try the unlock code that i just send u and let me know if it worked 1 Share this post Link to post Share on other sites
Genius 817 Report post Posted July 11, 2010 @ Hitesh - i shall upgrade and then downgrade, @ DR KMM - the code worked like magic, just wondering how the forum must be without your kind contribution, u truly are a gentleman, thanks Share this post Link to post Share on other sites
aalok 442 Report post Posted November 9, 2010 Strange problem in Verizon BB 9530 Successfully activated on Reliance today.. Voice calls works fine when dialing to someone & receiving, but when i try to call from any number picked up, either from Call log or from address book, am getting message "Please contact Reliance Customer Care" This is my very first BB device, which i am playing around with, so haven't much idea about BB OS. Gurus, please help, as i need this urgently.. (have to gift this device (activated) to someone..) Thanks.. Share this post Link to post Share on other sites
puneet_july30 36 Report post Posted November 9, 2010 Bhai have you changed the country code to 91. There is one more option which says prefix 1 for international calls.. Seniors please guide as I don't have the complete solution for this problem. Share this post Link to post Share on other sites
rohitgaur 78 Report post Posted November 10, 2010 AAalok I had the same issue with mine. Got resolved only after I reloaded PRL thru QPST and then it started working. All learnt from the Great Hitesh Hambarde of Pune.... Share this post Link to post Share on other sites
Genius 817 Report post Posted November 10, 2010 YA try putting PRL again it shall get resolved. jaldi gift karo bhai ..... Share this post Link to post Share on other sites
puneet_july30 36 Report post Posted November 10, 2010 He he he what a great coincidence.. Mera bhi Hitesh bhai ne hi theek kiya tha. AAalok I suggest you better consult with him once and I promise all your problems will be solved by him. Although he is a damn busy guy you ping him say "hi" and reply comes after half an hour. This I am telling you so that you don't get disappointed and dishearten when you won't get a reply from him for a good amount of time. But one thing is assured once he is ON then he will turn all your problems OFF. So all the best. Share this post Link to post Share on other sites
aalok 442 Report post Posted November 10, 2010 its working fine now.. i bought this from hitesh bhai only & bugged him a lot already.. btw, thanks for the tip puneet.. didn't pay attention towards it.. changing country code +1 to +91 worked.. Share this post Link to post Share on other sites
puneet_july30 36 Report post Posted November 10, 2010 Yey yey yey See Arun, Hitesh bhai mera pehla shikaar , o o o I mean I helped solving a problem for first time. Now don't I deserve to be at the elite panel of RimWeb? He he he just joking, maine to tukka maara tha jo lag gaya. I am still learning and there is still a long way to go, that is why I silenty keep reading the posts to gain more knowledge Aalok bhai ka case mere bhi saath hua tha jo Hitesh bhai ne hi solve kiya tha bas mujhe yaad tha, So I shared it with him. @Aalok bhai it is all my pleassure when I get a chance to help a senior. :-D 1 Share this post Link to post Share on other sites
aalok 442 Report post Posted November 10, 2010 me - senior...!!!!! No way... am a complete noob dude.. this forum is all about sharing & even i use to be on the forum silently.. have learnt a lot by both the Docs (Dr. Vinay & Dr. Mufaddal), Hitesh Bhai, Dhiraj Sir, to name a few.. many times, when i stuck with something, i keep on hunting , hunting & hunting, rather than asking.. this is the first time i had asked this as i was not having time to search.. anyways.. thanks a ton mate.. +1 to you.. Share this post Link to post Share on other sites
aalok 442 Report post Posted December 7, 2010 another head pounding problem.. not able to do conference call.. tried the method mentioned in the manual, but didn't work.. anyone using call conferencing using BB Storm 9530, Carrier - Reliance.. please help guys.. Share this post Link to post Share on other sites
Genius 817 Report post Posted December 7, 2010 Aalok - i use to do this havent dont it in storm but try it.. How to use (CDMA) Call the first person and wait until the call is connected. Put the call on hold by pressing the call key. Dial the second call. Wait until the second call gets connected. Once the second call gets connected, you have following options: Swap between the calls: Press 2 + call key. Drop the person you just dialled and connect to the one on hold: Press 1 + call key. Establish a three-way conference: Press 3 + call key. Once a conference has been set up, you cannot split the participants into two separate calls, until one of them disconnects. http://www.rcom.co.in/Rcom/personal/postpaid/cms.html#an5 Share this post Link to post Share on other sites
aalok 442 Report post Posted December 7, 2010 not working doc.. Share this post Link to post Share on other sites
drmadhu 87 Report post Posted December 7, 2010 Call conf . problems also found in pixi Share this post Link to post Share on other sites
