rishisuri 16 Report post Posted June 13, 2011 you must be missing something , or maybe your area is not having evdo yet. Share this post Link to post Share on other sites
abhi.r 95 Report post Posted June 13, 2011 when using CDMA Workshop 2.7 when i send SPC to phone status bar says: Failed... Phone does not answer. but when i write NV, using the TXT file. it says "You must send Current SPC to phone before write NV items. But when i do it twice, it successfully writes the NV items. Share this post Link to post Share on other sites
rishisuri 16 Report post Posted June 13, 2011 Dear abhi I think I know what u r missing now try doin it as I say First put your phone in diag mode , than connect it to qpst and see which com port it is connecting to. Close qpst and start cdma workshop now first connect the phone to cdma and select the com port than by clicking the connect tab connect the phone than click on read tab you will see all your phone details appearing on the left which now proves that u r connected, go to security tab and put your spc and click on send , u wil get a message saying phone is unloced now do the nv write process, u will get the message to send spc but ignore it and click on ok. You will get a message in the bottom saying 36 items written successfully, now shut down cdma , it will ask to rest phone press ok and your phone will reboot. U r done. Same way u can write the prl. 1 Share this post Link to post Share on other sites
abhi.r 95 Report post Posted June 14, 2011 go to security tab and put your spc and click on send This is where I was wrong i was trying sending SPC in wrong tab (main tab). Thank you NV items written successfully. +1 for you for your help Same way u can write the prl. Do i need any specific PRL for HSD/EVDO? Coz I tested my speed after successfully writing NVitems, but its still 16Kbps (1X). Share this post Link to post Share on other sites
csmart 472 Report post Posted June 14, 2011 @Rishisuri & others, pls provide info on enabling FM radio on epic... thanx in advance. Share this post Link to post Share on other sites
rishisuri 16 Report post Posted June 14, 2011 Reliance-HSD-Local-10005.prl Do i need any specific PRL for HSD/EVDO?Coz I tested my speed after successfully writing NVitems, but its still 16Kbps (1X). Share this post Link to post Share on other sites
abhi.r 95 Report post Posted June 14, 2011 link for a guide to update prl? tried to search in google, but the procedure i used dosent seems to work for me. Share this post Link to post Share on other sites
digitalnirvana 646 Report post Posted June 14, 2011 Abhishek, Before changing PRL ensure that EVDO is provisioned from backend. Only configuring hsd username password through CW will not work. Share this post Link to post Share on other sites
csmart 472 Report post Posted June 15, 2011 @rishisuri if there is no proper network or only 2 bars of network, then you will get 1x. Share this post Link to post Share on other sites
abhi.r 95 Report post Posted June 15, 2011 Abhishek, Before changing PRL ensure that EVDO is provisioned from backend. Only configuring hsd username password through CW will not work. hmm, then I have to ask Sadik bhai about it, whether EVDo services has been activated from backend or not for my number. Share this post Link to post Share on other sites
tarun_kabra 204 Report post Posted June 20, 2011 ACS Syndicate Frozen Rom v1.2 is released yesterday Whats new in v1.2 ****************************************************************** Darkkys zipalighn method Tweaked the file system for more speed and battery savings Default scheduler to BFQ Updated all apps Added Galaxy Tuner, KiesAir, SamsungApps, Voltage Control Baked in 6 lockscreen mod Updated theme ****************************************************************** XDA Link, Download Standard Share this post Link to post Share on other sites
abhi.r 95 Report post Posted June 21, 2011 anyone can please post the link to fully loaded SRF 1.2 w/ Touchwiz Share this post Link to post Share on other sites
abhi.r 95 Report post Posted June 24, 2011 i think battery drain is more on SRF1.2 than on stock. anyone else using SRF 1.2 like to share their battery info? Share this post Link to post Share on other sites
digitalnirvana 646 Report post Posted June 24, 2011 ^ Did you restore titanium backup apps + data? That is often the cause. Restore only apps not data. Share this post Link to post Share on other sites
abhi.r 95 Report post Posted June 24, 2011 I installed all my apps all from the scratch. Was painful but thought it might help to make my phone quicker than before. Sent from my SPH-D700 using Tapatalk Share this post Link to post Share on other sites
abhi.r 95 Report post Posted June 26, 2011 i think i've bricked my epic I was on SRF1.2 with purple CWM first i had problem reading SD card on my laptop. formatted it using CWM. but no use. Then I replaced my SD Card card to 1GD which i already had. it worked ok. but then I decided to go back to Stock Rom. so I wiped all data, and went for stock using Odin. but my Odin hanged at many stages.. some times hanged at .. Setup connection some times it hanged at .. data.rsf some times it hanged at .. factory.rsf then i searched XDA fourm. and a thread said to check all 3 options in Odin: repartition, auto reboot, reset time but odin hanged at set partition .. DO NOT TURN OFF TARGET!! googled and tried all methods.. but odin cannot flash stock rom Please help Share this post Link to post Share on other sites
abhi.r 95 Report post Posted June 26, 2011 My phone is bricked. USB device not recognized... (DOwnload Mode) Unknown device. I tried 2 different data cable. Win 7, Win XP, Different USB Ports but no use. My phone is not recognised by Windows. is it problem of the phone? Share this post Link to post Share on other sites
digitalnirvana 646 Report post Posted June 26, 2011 (edited) http://forum.xda-developers.com/showthread.php?t=1052813 Try a different USB port Take out battery and plug phone into computer and put into download mode without the battery installed Uninstall the drivers, reboot, and reinstall the drivers http://forum.xda-developers.com/showthread.php?t=773032 http://forum.xda-developers.com/showpost.php?p=7988098&postcount=7 Edited June 26, 2011 by dipanlahiri Share this post Link to post Share on other sites
abhi.r 95 Report post Posted June 27, 2011 (edited) yep tried all these. but my stubborn laptop does not recognize the device on any of the ports. uninstalling / reinstalling drivers, restarting PC.. tried all that. but still having the same problem. moreover I also tried on desktop using XP & Win 7. my phone is recognized by only 1 out of 4 USB ports. That too with Stock USB cable. (Not with Chinese cable i purchased yesterday). And when flash stock using Odin, it freezes at some point or the other and Screen of the phone goes off or sometimes green. ****** On pressing power on botton or Volume Down+Cam+ power button.. NOTHING HAPPENS. However I can boot into Download Mode (on battery only). 1) Computer do not recognize USB Drive. (tried uninstalling drivers > rebooting > reinstalling > rebotting ) still USB device not recognized. Even tried with different USB cable. And different ports. 2) However I managed it on my other computer. Where only 1 out of 4 USB port recognize my device. 3) Tried Odin to flash EC05 Stock... It hangs at some place or the other, and screen goes off or some times green (very rare). 4) Phone do not restart in Download mode without battery. I tried to boot download mode without battery (plugged into computer).. but it wont. Battery+USB = phone wont boot in download mode. Phone boots to download mode only on Battery. After that If i plug in the phone and remove the battery.. screen still stays on. ****** Edited June 27, 2011 by abhi.r Share this post Link to post Share on other sites
abhi.r 95 Report post Posted June 28, 2011 Okay, I unbricked Epic. thanks to Blackberry. (Now I officially love in love with BlackBerry). The data cable of Blackberry which i borrowed from my friend did the trick. Flashed odin with Repartition/Auto Reboot/ F. Reset Time / Phone EFS clear all checked. But now problem is when phone was on, i see a small triangle above the Signal Strength notifier. When i try to make a call.. i cant. When i try to call my number from another number, it says my phone is switched off. I even tried *228.. and it says my number is already been activated. I think i need to install something more. Gurus, please help. PS: I would like to repeat... Im in love with blackberry. it saved my phone. Share this post Link to post Share on other sites
kshah 452 Report post Posted June 28, 2011 Congratulations Good to know about cable, my comments were wrong Flash prl. Your phone need to be programed for MIN, PRL and other provisioning data Sent from my SPH-D700 using Tapatalk Share this post Link to post Share on other sites
abhi.r 95 Report post Posted June 28, 2011 (edited) Thanks Kshah bro. Okay, here is what i did... Radio programmed with the help of thread by harismahesh http://www.rimweb.in/forums/topic/29968-guide-for-radio-reprogramming-eb13-radio-reset-solution/ thank you harishmahesh Also updated the PRL to 10005. The triangle is gone. but still i cant make/receive calls. Signal strength is also very random.. mostly 0 or 2 bars... sometimes it bumps to 100%. Edited June 28, 2011 by abhi.r Share this post Link to post Share on other sites
ankurcshah 112 Report post Posted June 28, 2011 Hmmm try checking the Akey! That might be the problem. 1 Share this post Link to post Share on other sites
dkaile 1,051 Report post Posted June 28, 2011 ^ I think the MIN needs to be re-injected Share this post Link to post Share on other sites
abhi.r 95 Report post Posted June 28, 2011 (edited) Okay, In CDMA WOrkshop in NAM when I clicked Read.. it shows as in the pic... *PICS REMOVED* whats wrong and how to correct it? Edited June 30, 2011 by abhi.r Share this post Link to post Share on other sites