harismahesh 55 Report post Posted March 17, 2011 1. First download the CDMA workshop and QPST needed. You will get both in this link: downloads 2. Now pause the protection of your antivirus, else the CDMA workshop key will be identified as virus. 3. Open CDMA workshop. 4. Now from your phone dial ##8778#. It will screen titled - phoneutil. In that under UART - it will be in MODEM and under USB - change it to MODEM. 5. Plug your phone to PC. 6. Now to check in which port your phone is connected, open device manager in pc, and under PORT tab, check for the Samsung mobile modem diagnostic port. 7. Now in CW (cdma workshop) on the MAIN tab, under com setting, select the same tab and click connect. 8. Now go to SECURITY tab, and under SPC, enter 000000, its common one. Else ask your seller. Click SPC, now two options will come, SEND, and WRITE. Click SEND. 9. Message popup will come like phone unlocked. 10. Go to NAM tab. be careful everyone (noobs :-)) including me have a chance to make mistake. 11. Select NAM1, Click READ, and then it will read the NAM setting from your phone. And now click save and the NAM setting will be saved in your pc. Close CW. Now go to QPST. 12. Open QPST Configuration. And if the port in which phone is connected is not shown, and then add the port manually by selecting ADD NEW PORT. It will show the status as Connected. 13. Now from the tab - START CLIENTS - select - SERVICE PROGRAMING. 14. A new tab will be opened and will show your phone name as FFA6550 - ZRF6500. Click OK. 15. The tab will be shown, with ESN number and all the details. And status of phone as online. 16. Now down, there will be a button, Load from file. Click on it and select the QCN file uploaded by hetal in the above post. Click OK 17. And in QPST, now click the button, Write to phone. Now your phone will be restarted. And will be reset. 18. Close QPST - one by one. EXIT. Now with cW. 19. Open CW and connect it to the same port. 20. Now go to SECURITY tab, and under SPC, enter 000000, its common one. Else ask your seller. Click SPC, now two options will come, SEND, and WRITE. Click SEND. 21. Message popup will come like phone unlocked 22. Go to NAM tab and click the button LOAD. It will ask for the file and select the previously back up NAM file. 23. Click write button. and close the cDMA. It will ask like phone setting has been changed reboot. Click Yes. 24. Its finished. You have done radio reprogramming!!!! After this For Data to work. Please follow the thread posted by dkaile. HERE 11 Share this post Link to post Share on other sites
Dj 25 Report post Posted March 17, 2011 good job !! Share this post Link to post Share on other sites
harismahesh 55 Report post Posted March 17, 2011 heyy...its all because of u 3 - u, dkaile and hetal ! Share this post Link to post Share on other sites
rajanmehta 4,056 Report post Posted March 17, 2011 Hari, You took the effort to write down detailed step by step guide for the benefit of all...Once your own problem was solved with the help of Gurus... That's commendable... +1 Of Course Gurus can never be thanked enough for all the solutions and help they provide... Share this post Link to post Share on other sites
digitalnirvana 646 Report post Posted March 17, 2011 Good post, I echo Rajan. Share this post Link to post Share on other sites
Dj 25 Report post Posted March 17, 2011 mods and admins... please re-title this thread to include EB13 radio reset solution. may want to sticky it for some time. Share this post Link to post Share on other sites
ni0987 179 Report post Posted March 17, 2011 Superb work!! :signthankspin: Share this post Link to post Share on other sites
Anupe 14 Report post Posted March 18, 2011 Thanks, Hari Share this post Link to post Share on other sites
Pulkit Gupta 47 Report post Posted March 18, 2011 thanks a lot +1 Share this post Link to post Share on other sites
dev997 62 Report post Posted June 24, 2011 HI GURUS , Out of curiosity i tried few things and now facing constant restart problem on my epic. First I followed the steps to have Rworld working internet on my phone. Unfortunately before i could find any plans for the same I started facing phone restart problem as the mobile network fades. I'm currently on EC05 and using Syndicate rom v1.2. So as suggested I found that the problem shouldn't happen on EC05, but yet I'm still facing the problem. Please do help. Also I don't even know if my rworld internet plans is working ,as I couldn't get a plan activated .I can access internet though , but its without any plan. My internet was working earlier also , but I did this to get cheaper plans given by Rworld. Please someone also advice me how to active a good rworld mobile internet plan on my phone too. Eagerly waiting for the reply.Please also give me an estimate about how it will cost me to have EVDO activated on my phone. I'm from Pune btw. Thanks Dev Share this post Link to post Share on other sites
harismahesh 55 Report post Posted June 24, 2011 sirji check ur PM...and call me after night 10. I wil guide u..no worries... Share this post Link to post Share on other sites
abhi.r 95 Report post Posted June 24, 2011 currently Im having lot of problem with call drop, sometimes when i make/receive a call.. after some times the other person stop hearing my voice. i can hear other person's voice clearly.. but he cannot hear my voice in mid of the call. is this because of 1005 HSD Prl? will reprogramming radio solve this problem? Share this post Link to post Share on other sites
dev997 62 Report post Posted June 26, 2011 Hi All Respected gurus , I need your help asap. I'm Dev from Pune ,proud owner of Epic 4g . I purchased my epic through Ebay from Parin Bhai. Actually with the help of Hari S mahesh , extremely helpful guy from this forum , i tried to do radio reset as I was facing the problem on phone restart due to continous radio reset. I followed these steps 1. Odin back to DL18 with radio reset to Sprint. 2. load Reliance HSD local 1005 prl file. 3. load NV item (ppp.txt) dump file for netconnect. 4. load backup NAM file back. After following these steps carefully the problem of radio reset is gone but I'm facing even bigger issue. My calls are getting dropped within 10 sec , while both receiving and sending. Please advice me what to do now .. Thanks Dev Share this post Link to post Share on other sites
drmadhu 87 Report post Posted June 27, 2011 @Dev - This is the problem of akey please contact parinbhai he is done it. Share this post Link to post Share on other sites
abhi.r 95 Report post Posted June 30, 2011 is there a way to undo this radio reprogramming process? Share this post Link to post Share on other sites
joban13 0 Report post Posted July 26, 2012 Good work bro... Share this post Link to post Share on other sites