StaticElectricity 8 Report post Posted March 9, 2004 Here Are A Few AT Commands For The LG-2030 Using MSM5105 Chipset. I Have Only Tested These On The LG-2030. Use These Commands Very Cautiously As They Might Cause Irrepairable Damage To The Phone Hardware As Well As Software. You Can In No Way Under Any Circumstances Hold Me Responsible For Any Damage Whatsoever Caused To Your Phone. They May Differ From Handset To Handest And Also According To The Software Version Used. I Tested These Commands By Typing Them In 'HyperTerminal' LG 2030 CDMA AT Command List (Note Suffix ? To Get The Current Status Or =? To Get Possbile Setting Values. Eg- AT$QCDMR? Or AT$QCDMR=?) AT+GCAP Get Configuration And Supported Capabilities List. AT+CFG Configuration String AT+CDR UM Interface Data Compression Reporting AT+CRM Set Rm Interface Protocol AT+CBC Battery Charge AT+CQD Command Status Inactivity Timer AT+CRC Cellular Result Code AT+CMIP Mobile Station IP Address AT+CBIP Base Station IP Address AT+CSS Serving System AT+CSQ Query Received Signal Quality AT+CFC UM Interface Fax Compression AT+CDV Dial Command for Voice Calls Packet Data AT Commands AT&CX Carrier Detect Pin Settings AT&DX DTR Pin Settings AT&QCQNC Enable/Disable QNC Capability AT&QCSO Service option Set Setting AT+CTA Inactive Channel Timeout Setting AT+CMUX Multiplex option Set Setting AT$QCMDR Set Medium Data Rate Setting AT$QCSCRM SCRM Enable/Disable AT$QCTRTL R-SCH Throttling Enable/Disable AT$QCDMG Transition to DM Operation AT$QCQNC Enable/Disable Quick Net Connect AT$QCMTOM Packet Data Call Using AT$QCRLPD Dump RLP Protocol Statistics AT$QCRLPR Reset RLP Protocol Statistics AT$QCPPPD Dump PPP Protocol Statistics AT$QCPPPR Reset PPP Protocol Statistics AT$QCIPD Dump It Protocol Statistics AT$QCIPR Reset IP Protocol Statistics AT$QUDPD Dump UDP Protocol Statistics AT$QCUDPR Reset UDP Protocol Statistics AT$QCTCPD Dump TCP Protocol Statistics AT$QCTCPR Reset TCP Protocol Statistics AT&V Dump Configuration Parameters AT&C2 Carrier Detect Pin Behavior AT$QCRL3D Dump RLP 3 Protocol Statistics AT$QCRL3R Reset RLP 3 Protocol Statistics AT$QCSO Set Data Service Option Number Set AT$QCCLR Clear Mobile Error Log AT$QCPKND Enable/Disable Automatic Packet Detection AT$QCVAD Pearrangement Setting AT$QCDMR Set DM Baud Rate AT$QCMDR Set Medium Data Rate Have Fun!!!! 1 Share this post Link to post Share on other sites
Ashokjp 15 Report post Posted March 9, 2004 Hey static... Thnx for these I was searching for AT Commands.. i tried some cdma at commands for sms But i got a error.. dint work.. Do you have the right at commands for sending sms through LG 2030? Share this post Link to post Share on other sites
Chirag 5 Report post Posted March 9, 2004 Here Are A Few AT Commands For The LG-2030 Using MSM5105 Chipset. Wht is this??? can anyone explain how and wht r its uses? Share this post Link to post Share on other sites
Ashokjp 15 Report post Posted March 9, 2004 Normal modems use a set of ‘Attention Codes’ (known as AT commands) for normal operation.. These commands instructs the phone to do something specific, such as dialling a telephone number. We can control the mobile through these commands.. Such as send sms, retrieve certain settings etc.. The "AT" refers to getting the attention of your modem. Share this post Link to post Share on other sites
Chirag 5 Report post Posted March 9, 2004 alrite... so how do u enter these commands? from where? and whts the basic idea of manually giving these commands? its there already in the phone... so whts the fun? Am a lay person for all this.. hope u dont mind answering these silly question! Share this post Link to post Share on other sites
niket 0 Report post Posted March 9, 2004 Ashok, How can we use hyperterminal for that? I know AT command used in modems, how can we send sms? And can u have AT command for N191 Share this post Link to post Share on other sites
niket 0 Report post Posted March 9, 2004 Hey buddies, i have some questions Windows Help Describe this, AT+FCLASS=? Fax classes supported by the modem, if any. so i applied that and got following answer, 0,2.0 That means Fax is supported or not? Following works and dial number 31003100 at+cdv 31003100 OK for, AT+GCAP Get Configuration And Supported Capabilities List... so it display at+gcap +GCAP: +CIS707-A, +MS, +ES, +DS, +FCLASS What does all this means.. I want tutorial for this AT commands badly.... ashok , vikas pls. how can i send sms? all credits to StaticElectricity..thanx yaar Share this post Link to post Share on other sites
StaticElectricity 8 Report post Posted March 9, 2004 It's Good To See That All Of You Liked My Post. At Least 2 Days Of My Hard Work's Not Gone Waste. You See, All Those AT$'QC' I.E. qualcomm Standard Types Are Not Documented By Qualcomm. So I Had To Write A Program To Send Random Character Combinations (4 Letter) After The Prefix AT$QCXXXX And Record All Those Which Did Not Return ERROR. Enough Of That... I Did All This Just To Find Out The SMS Codes But What I Discovered Was Nasty. Qualcomm Has Put The SMS Initialization Into Its BREW Protocol. So No Ones Coming Close To Sending SMS'es Any Time Soon.. Since BREW Documentation Costs Something Like 1 Crore Of Rupees. Anyways The Main Reason For This Post Is Because I Discovered Something Called An 'SMS Trigger'. Thats All I Know If Any One Knows Any Thing About It Please Post It Here. It Will Help Everyone. Share this post Link to post Share on other sites
niket 0 Report post Posted March 9, 2004 Static, I have N191 and all your code works fine here. So change Title of Post. In N191 No way to see Area in which phone is operating.(RD 2030 shows when calling) But when I apply, AT+CDV ANYPHONENUM It shows Area e.g Gandhinagar... he he First i think we can get a way to sms form PC. but now... hope ashok or vikas finds some interesting. Share this post Link to post Share on other sites
Ashokjp 15 Report post Posted March 9, 2004 thnx niket for tat link I had seen tat stuff before.. but it doesnt give any good reply there Thnx to Static too for these commands Well i have been searching out for at commands for sms.. And i was mailing out guys seeking out for help in this matter.. Yesterday i got a reply from a guy named Vidhyadhar Dear Ashok i know how to send sms using lg rd 2030 .For that u will require Serial data cable for the lg rd 2030 and the R connect kit which can be obtained from any reliance web world. then in that kit there is a facility to send the sms .before that u have to gie thae smsc centre number. Anything more ? U r welcome Vidyadhar As i dint have the kit, i dont have any info on the soft inside it.. I replied to him asking for the soft.. Maybe i will wait till i get a response from him... Share this post Link to post Share on other sites
Ashokjp 15 Report post Posted March 9, 2004 alrite... so how do u enter these commands? from where? and whts the basic idea of manually giving these commands? its there already in the phone... so whts the fun? Am a lay person for all this.. hope u dont mind answering these silly question! Chirag u can have this tested in Hyperterminal... You might be having it under Accessories > Communication > Hyperterminal... in ur Start menu In that open a connection to the phone in the appropriate port.. And type in these commands... Ashok,How can we use hyperterminal for that? I know AT command used in modems, how can we send sms? And can u have AT command for N191 As i said above u can use Hyperterminal... You jus have to open a connection selecting the com port in which u have the phone connected... And then u get in the terminal window(main screen) .. Type in these commands.. Share this post Link to post Share on other sites
Chirag 5 Report post Posted March 9, 2004 geeezzz u guys r real geeks!!... so wht i understand from the above talk is that we can manhandle the phone using the PC?? is that right? meaning i can send sms or execute other features of the fone using the hyperterminal from my PC? Share this post Link to post Share on other sites
Ashokjp 15 Report post Posted March 9, 2004 i can use the phone's various features thru the computer? Yeh many... Share this post Link to post Share on other sites
niket 0 Report post Posted March 9, 2004 i can send sms or execute other features using the hyperterminal from my PC? For sending SMS, it is still a Question I found some thing for BREW, It is BREW SDK it may contains some info about BREW. https://brewx.qualcomm.com/bws/content/gi/p...all/install.htm But as Static said , for sms BREW is used.. i don't think RD2030 and N191 is BREW enabled. Share this post Link to post Share on other sites
Ashokjp 15 Report post Posted March 9, 2004 But as SE said ,for sms BREW is used.. i don't think RD2030 and N191 is BREW enabled. I think Bitpim is using Brew to communicate with LG 2030.. Techie guys plz correct if i am wrong Share this post Link to post Share on other sites
StaticElectricity 8 Report post Posted March 9, 2004 yeah right RD2030 *IS* most certainly BREW enabeled. Also, I Discovered That The BREW Protocol Works At 38.8 Kbps... Thats All I Know. By The Way What About That 'SMS Trigger'?? P.S. Please Don't Refer To Me As *SE* atleast say Static if not StaticElectricity. Share this post Link to post Share on other sites
niket 0 Report post Posted March 9, 2004 well i get PDF for cellular AT command.. check that. AT_cmds_CDMA.pdf Share this post Link to post Share on other sites
StaticElectricity 8 Report post Posted March 9, 2004 I found some thing for BREW, It is BREW SDK it may contains some info about BREW. https://brewx.qualcomm.com/bws/content/gi/p...all/install.htm hey niket that url dosent work...that javascript i mean. Share this post Link to post Share on other sites
niket 0 Report post Posted March 9, 2004 Hey Static, on my pc it works find.. u can goto www.qualcomm.com and then Brew site there is it available with some simple registration procedure. Share this post Link to post Share on other sites
StaticElectricity 8 Report post Posted March 9, 2004 wow thanks dude. i had tried it befor but they said that for propritery protocol information they would charge some million dollars Share this post Link to post Share on other sites
StaticElectricity 8 Report post Posted March 9, 2004 hey niket that file u uploaded dosent contain any of those commands related to propritery Qualcomm Chipset... all these codes given here are general. Share this post Link to post Share on other sites
niket 0 Report post Posted March 9, 2004 hey niket that file u uploaded dosent contain any of those commands related to propritery Qualcomm Chipset... all these codes given here are general. I don't know much about AT command, i find this file so posted... it is descriptive in some case. Share this post Link to post Share on other sites
niket 0 Report post Posted March 9, 2004 wow thanks dude.i had tried it befor but they said that for propritery protocol information they would charge some million dollars This SDK is just similar to J2ME SDK. but it contains much doc to know BREW better Share this post Link to post Share on other sites
StaticElectricity 8 Report post Posted March 9, 2004 i still couldnt get your link to work... but i'll try someway Share this post Link to post Share on other sites
Anupam 0 Report post Posted March 12, 2004 hey guys, nice to read all of your msgs flowing here. RD2030 is brew enabled j2me handset....and brew SDK is freely downlaodable. however its free for development only in emulator. for actual deployment, you must apply for verisign IDs. ( cost $400) for a year, for 100 apps. all applications on a brew handset are digitally signed by this ID. i tried this with my RD2030. i downlaoded "air-attack" game from r-world.. so rd2030 keeps it in its memory... it created a new directory under /ams called "16" ( it could be any number) and downloads 2 files , a .jar, and a .jad file ( these are J2ME files). i created a new " hello world J2me application by teh same name and replaced it via BITPIM. then when i try running air attack, it tried to run my files..teh .JAD file is read properly...however teh jar fails to load.. i feel that is because, its not signed properly( brew-verisign IDs)...but i haven't given up on that...looks like i am going to keep my phone on cable all of this sunday...:-) cheers, anupam Share this post Link to post Share on other sites
