Genius 817 Report post Posted June 27, 2012 Motorola are not easy phone may will agree, i have Motorola Droid Razr with 2.6.6 which was in OMH card mode and wanted to shift to NV item as i was upgrading it to ICS official via droid utility 1.7 posted else where in this forum. I was trying for long 2-3 days to get it working in NV mode via CDMA whsp 2.8.5 but it failed all the time. Problem with moto sets is there is no direct COM port and then you have to use HW VSP (virtual serial port) to connect to it. for this the set has to be kept in windows PC mode for proper handshake and then too many times cdma wksp fails to read / write many times and it keeps on asking SPC. One more thing after ICS there is no Windows PC mode in Moto USB menu so there was no option to connect it to CDMA wksp or QPST i was going to net i and found solution so sharing it with you all. the main advantage is you don't need HW VSP for this (tried tested with RAZR must work with other also- can't say) and with this CDMA / QPST connected like charm without any hitch. Method: Get your Windows Droid driver - for moto and instal it connect phone in PC put your phone in “AP Fastboot” see below Let’s put your Droid Razr into Fastboot mode. You can do this by holding down Volume Up, Volume Down, and Power buttons together. Hold them down together for about 5 seconds until your phone resets (your screen will flicker and turn off), then quickly let go of the Power button then hold it down again. (See video tutorial if you don’t get it.) http://droidrazrroot...-2-3-66-12-173/ Now is the main part once in AP F mode there is a option BP tools at last - select it It will install all the drivers needed and bingo it will show in your Device manager along with the com port - thats it you don't need HW VSP at all and all your commands will work like a charm. PS: Please list if it worked in any other moto Thanks to Parin and Kapil Ji for their help at all times 5 Share this post Link to post Share on other sites
rajanmehta 4,056 Report post Posted June 27, 2012 Razr sharp info with motivating visual! All ports will open automatically! Share this post Link to post Share on other sites
nitink 279 Report post Posted June 27, 2012 thank you Share this post Link to post Share on other sites
KapilAgrawal 340 Report post Posted June 28, 2012 BP Tools is supported by Motorola Droid Bionic Motorola Droid 3 Motorola Droid 4 Motorola Droid Razr Motorola Droid Razr Max Some new bootloader on Droid X2 & Photon also support this 1 Share this post Link to post Share on other sites
pulsar220 2 Report post Posted June 28, 2012 After moving to ICS MiUi ROM I am unable to go into BP tools mode It worked earlier when I was on stock ROM. Can't find anything on the net for it as well. Neither the dialler in MiUi allows me to ##DATA#. Anyone have any ideas? Share this post Link to post Share on other sites
