shreesh 406 Report post Posted August 24, 2012 (edited) Hello all this is a detail note about getting 1X on verizon palm pre plus 1. first turn off developer mode 2. after phone restart put phone on diag mode 3. connect phone to pc 4. install diag drivers 5. go to computer management and check the port number 6. then open qpst 2.7 build 7. in qpst configuration add the palm port 8. then open qpst service programing 9. you will see mobile esn and name if any. 10. select that phone and say read from phone 11. it will ask for SPC, SPC for all verizon phone are zero. 12. First important thing is to take backup for qpst configuration. 13. there is "save to File...." button , click on it and save the new file. 14. then go to profiles 15. put active profile=0 16. set ip = simple ip 17. then select profile 0 and then click on edit 18. then make all ip=0.0.0.0 19. in profile 0 keep user name password as it is. 20. then go to PPP tab. 21. in UM put user id and password as phone number. 22. do same in AN 23. then do write to phone, it will write all configuration to phone and phone will reboot automatically. 24. then in phone go to epst (##3836#) and put phone on 1x/rtt 25. make all IP zero in browser configuration in phone and reboot the phone So u can see 1X logo on screen and you can access to internet!! Edited August 24, 2012 by shreesh.pvg 2 Share this post Link to post Share on other sites
Genius 817 Report post Posted August 24, 2012 (edited) 21. in UM put user id and password as phone number. its better to keep it as net / net as wen you resale its easy Username / PWD thread: http://www.rimweb.in...nce-netconnect/ Data on Pre thread is existing (2nd oct 2009) my friend from out own Legendary Dr KM Mufi : http://www.rimweb.in...t-data-on-palm/ only USERNAME AND PWD has changed Edited August 24, 2012 by Genius 1 Share this post Link to post Share on other sites
shreesh 406 Report post Posted August 24, 2012 Thank you for your genius quote!!! yes because of mufy's thread it made easy!!!! Share this post Link to post Share on other sites
parag31 1 Report post Posted August 25, 2012 In my Palm Pixi Plus i am facing strange problem. Whenever I restart the Phone Net/Email works smoothly for 2-3 hours. Then it stopped. 3G icon on phone it blinks continuously, not faded. When again i restart the phone it works nicely. Worked all the tricks but not succeeded. Please enlighten the issue. Share this post Link to post Share on other sites
shreesh 406 Report post Posted August 25, 2012 (edited) NV Dump! or may be network problem Edited August 25, 2012 by shreesh.pvg Share this post Link to post Share on other sites
Aamer Hayat Khan 0 Report post Posted November 4, 2012 Yessssssssssssssssssssssss, I have done it. I am using 1x on my palm pixi Share this post Link to post Share on other sites
