dnyanu11 0 Report post Posted December 11, 2013 I have got USC note 2 .need support for evdo activation Today transfered mdn frm ma evo lte to note 2 1) Phone is activated. 2) PRL 10005 is flashed using Cdma Workshop. 3) 1x data is working fine. But no Evdo. 4)all evdo parameters are correct as suggested by parin. My phone settings are as follows. 1)Baseband-R950VXAME2 2)Build number-JZO54K.R950VXAME2 3)Android -4.1.2 4)Under mobile network –Mobile data & Data roaming both ticked. Also Network Mode is CDMA/LTE/EVDO. 5)USC 4g lte SIM is their in handset. So anyone know the solution ???? Sent from my SCH-R950 using Tapatalk Share this post Link to post Share on other sites
kshah 452 Report post Posted December 12, 2013 Try downgrading radio and see if endo comes up. I assume that programming is proper and evdo active for given handset. Share this post Link to post Share on other sites
dnyanu11 0 Report post Posted December 12, 2013 Any working radio link u have ??? Sent from my SCH-R950 using Tapatalk Share this post Link to post Share on other sites
csmart 472 Report post Posted December 12, 2013 I have got USC note 2 .need support for evdo activation Today transfered mdn frm ma evo lte to note 2 Is EVDO active on your account from Reliance? I know it a basic, but many times, we forget this basic out of excitement. I will suggest to request Reliance activate EVDO again. I had to do the same when I changed to Note 2. Share this post Link to post Share on other sites
dnyanu11 0 Report post Posted December 12, 2013 I was using evdo on ma evo lte till i transfered numbr to note ....now i m seeing that evdo stl running on evo lte .....so do i need to deactivate evdo and activate again???Sent from my SCH-R950 using Tapatalk Share this post Link to post Share on other sites
::Hitesh:: 1,763 Report post Posted December 12, 2013 ^^^ send evdo sms again, you will get confirmation of evdo alrady activated or not. Share this post Link to post Share on other sites
axiom 5 Report post Posted December 12, 2013 dial *228,,,,,1 (to insert commas , long press *) it should ask u to enter 9 digit pin if you phone is fully activated. if it says "your phone could not be acivated" your OTAF status is 4 which shoud be 3. Share this post Link to post Share on other sites
dnyanu11 0 Report post Posted December 12, 2013 My phone is activated and running ...only issue m facing is evdo. Sent from my SCH-R950 using Tapatalk Share this post Link to post Share on other sites
snorlax 319 Report post Posted December 12, 2013 My phone is activated and running ...only issue m facing is evdo. Sent from my SCH-R950 using Tapatalk PM me your number. Will get evdo activated on your new device. Share this post Link to post Share on other sites
axiom 5 Report post Posted December 12, 2013 Dnyanu11, Ankitji will sure do it for u. will u please dial *228,,,,,1 and confirm if my observation is right? what is that message u r getting? i have gone thru this 3 months back. please. it will help all of us. Share this post Link to post Share on other sites
joshm 818 Report post Posted December 12, 2013 (edited) You need to get evdo transferred Get it de activated now and after 24 hrs give request for reactivation All will be well. This is a well known issue, so the way around is give request for evdo deactivation and then re activation. Sent from my SCH-R950 using Tapatalk 2 Edited December 12, 2013 by joshm Share this post Link to post Share on other sites
dnyanu11 0 Report post Posted December 13, 2013 Got Evdo working ... Thanks for the Great help Ankit. Thanks to all the Rimwebians for ur valiable suggestions. Now i am getting OTA for 4.3 is it ok to take ota or flash the 4.3 using recovery??? Sent from my SCH-R950 using Tapatalk Share this post Link to post Share on other sites
joshm 818 Report post Posted December 13, 2013 Dont take the ota Use recovery Sent from my Nexus 7 using Tapatalk 2 Share this post Link to post Share on other sites
dnyanu11 0 Report post Posted December 13, 2013 Thanks.... Sent from my SCH-R950 using Tapatalk Share this post Link to post Share on other sites
dnyanu11 0 Report post Posted December 15, 2013 My note 2 is on 4.1.2 ME2 Need help to install TWRP and root ....anyone have link for d odin files????? Sent from my SCH-R950 using Tapatalk Share this post Link to post Share on other sites
vahidmomin 66 Report post Posted December 16, 2013 My note 2 is on 4.1.2 ME2 Need help to install TWRP and root ....anyone have link for d odin files????? Sent from my SCH-R950 using Tapatalk Go here. http://theunlockr.com/2013/02/08/how-to-root-the-samsung-galaxy-note-2-us-cellular/ Share this post Link to post Share on other sites
Dnyaneshwar Patekar 5 Report post Posted December 20, 2013 Hello everyone, I facing weird incoming calls issue with Note 2 r950. i have got my note 2 10 days back ...it is activated for reliance and everything like voice ...evdo all working. But in last 10 days i observed some weird issue. whenever somebody dials my number ....Most of the time u get it is not reachable...not available...switched off status ...even though phone is up with full network coverage at that time ....... Some time call gets through with first dial ...otherwise person have to try at least a 5-10 times to reach me . Is it know issue ???? Any solution for it phone is running on ME 2 modem MK3 ROM provided by joshm here in this thread . it is having USC sim In it as well . So plz help if anyone know d solution ...goggles a lot but have not found anything Share this post Link to post Share on other sites
kshah 452 Report post Posted December 21, 2013 Disable ddtm. It is in hidden menu forgot exact location. You will have to downgrade to change setting Share this post Link to post Share on other sites
joshm 818 Report post Posted January 4, 2014 Hey all Just wanted to share my experience with you all. Since past 1 week I have been using pure vanilla, I mean CYanogen mod most stable version, and it's really so awesome, battery consumption is so low and its smooth as hell. No bloat whatsoever and there are so many practical options in it. If anyone wants I can upload the rom, gasps and compatible Cwm to flash it. Let me know Sent from my SCH-R950 using Tapatalk 2 Share this post Link to post Share on other sites
pradeep564 8 Report post Posted January 4, 2014 Joshm- I have been using stock rom on USC note 2 which is rooted & have removed all the bloatwares. I am very satisfied with the battery life. Can u throw some light on the difference in performance among both the roms if u have used stock as well Share this post Link to post Share on other sites
dnyanu11 0 Report post Posted January 5, 2014 Yes upload plz......Thanks Sent from my SCH-R950 using Tapatalk Share this post Link to post Share on other sites
joshm 818 Report post Posted January 5, 2014 (edited) CYANOGEN MOD 10.1.3 ( based on 4.2.2 ) STABLE for SCH-R950 - US Cellular NOTE II Works wonderfully well with awesome battery backup and with pure vanilla experience Ok here you Go This is the Official Cyanogen Mod 10.1.3 STABLE build with no bugs reported total bare bones and tremendous battery life and awesome smooth pure VANILLA interface I have uploaded all the needed things in a folder to MEDIAFIRE for all MEDIAFIRE Link - ( all three files put in one folder ) - https://www.mediafire.com/?k94owj439j52eop,6s65o309auie4yd,9ztyrbkt5te45km OFFICIAL Direct Links - Official CM servers link For ROM - http://download.cyanogenmod.org/get/jenkins/42549/cm-10.1.3-r950.zip Google Apps ( Gapps ) direct link - http://goo.im/gapps/gapps-jb-20130812-signed.zip CWM6 Recovery - which is to be used for flashing this - http://www.androidfilehost.com/?fid=9390288116658471792 Samsung official Touchwiz Camera app that works with CM on our note 2 now : what i have found in CM is the Camera isnt to my liking , but Thanks to awesome developer at XDA, Treeki and the great USCC developer na7q , here we have a working TW camera app for the CM , Please Note that the CAMCORDER dioesnt work in this , but its a great addition , now we can use the CM as our dependable ROM Download this : store on memory reboot in recovery make a backup ( just in case ) Flash in recovery http://upload.teamuscellular.com/318 Dark Messaging App in zip form - If you are like me who prefers everything DARK and BLACK then you may flash this DARK Messaging zip which will darken your messages ( to me they look awesome) Should be flashed in CWM recovery http://www.mediafire.com/download/vze7hkry3ifshui/Dark-Messaging-7-16.zip TWRP Recovery for USCC NOTE2 - version 2.6.3.1 - This is the latest and works well with 4.3 MK3 TOUCHWIZ Roms too If you ever want to revert to your previous backups , or wish to go back to stock roms then its better to flash back the TWRP recovery this is the latest version of the TWRP recovery Zip file - recovery flashable - http://www.mediafire.com/download/okb590kigsl9x4a/openrecovery-twrp-2.6.3.1-t0lteusc.zip Odin flashable TAR file - http://www.mediafire.com/download/d4o7ikh04ub0o5b/t0lteusc-recovery.img.tar INSTALLATION : This Rom can only be flashed if you are rooted and have custom recovery installed , if you arenot rooted then probably you should skipthis rom and be with your stock rom. 1.. backup your current ROM ( probably you are on TWRP recovery so make a backup of your rOM in it ) If possible copy the backup and also store in your PC too for safety. ALso make a backup of your apps , contacts , sms , call logs , apmn settings , systems settinmgs , bookmarks using MY BAKUP ROOT APP 2.. Copy all the three or even 4 files ( including the dark messaging app ) to your internal or external storage. 3.. again reminding - make a BACKUP of your current rom. 4.. First of all FLASH the CWM TOUCH recovery that i have added , its ABSOLUTELY important as CM Roms cant be flashed properly with TWRP 5.. Once the flash of recovery finishes , go to reboot option in main menu and hit reboot in recovery This will reboot phone straight into CWM touch recovery 6.. wipe , cache , wipe dalvik, and then wip data or factory reset while in CWM Touch recovery 7.. flash the ROM first ( use the flash zip from sd card or external sd card option ) 8.. after that flash the GAPPS file. REBOOT THE PHONE AND LET IT BOOT COMPLETELY , CHK EVERYTHING IF ALL IS WORKING WELL 9.. If you want to convert your messaging app into darker black shade then reboot into recovery and flash the dark messaging zip file. enjoy !! IF YOU ARENT HAPPY or may be want to get back to your backup the follow these steps 1.. Reboot into CWM recovery , and make a backup ( if in future you may feel like moving back to your CM backup - but plz mind you should be on CWM recovery to restore CWM recovery nandroid backups ) 2.. stay on the recovery and find the TWRP recovery zip and flash it OR reboot phone in download mode and flash the ODIN Tar of TWRP recovery and reboot in recovery 3.. once done reboot again in recovery and this will boot phone in TWRP recovery 4.. restore your previous ROMs backup using your latest TWRP Have Fun , Dont foregt to Hit Thanks Plz note : flashing , rooting might brick your phone so We are not responssible if your phone is rendered as a heavy weight paperweight or it explodes in your face. Edited January 7, 2014 by joshm 4 Share this post Link to post Share on other sites
joshm 818 Report post Posted January 5, 2014 For those who may ber wonderring about the icons and launcher well i have installed NOVA LAUNCHER and activated KITKAT icons set inside it also i like full screen NON scrolling wallpapers so i have disabled scrolling of wallpapers and while selecting an image to set as a wallpaper i select the portrait mode only so the full resolution is justified for the image and it fills the full screen without any crop Share this post Link to post Share on other sites
dnyanu11 0 Report post Posted January 5, 2014 Great Input. ....Thanks a ton man Sent from my SCH-R950 using Tapatalk Share this post Link to post Share on other sites
amitroutray 384 Report post Posted January 5, 2014 Very nice tutorial every time as always. Good work... Triggered from Transformer 300 using Tapatalk HD Share this post Link to post Share on other sites