kshah 452 Report post Posted June 25, 2013 Is phone reading iccid? Share this post Link to post Share on other sites
kshah 452 Report post Posted June 25, 2013 Here is one probable solution. Down grade radio Enable hidden menu Use hidden menu apk and open ##data setting Select edit > other > 1x/hdr > lte+cdma+evdo Do not reboot.post if data works 1 Share this post Link to post Share on other sites
Maulik.Parekh 34 Report post Posted June 25, 2013 Yes phone is reading ICCID. Where can i get hiddenmenu.apk ? Share this post Link to post Share on other sites
skssha 8 Report post Posted June 26, 2013 Yes phone is reading ICCID. Where can i get hiddenmenu.apk ? Its here http://www.rimweb.in/forums/topic/34656-diag-mode-for-mobiles/?p=290847 sivashankkar Share this post Link to post Share on other sites
Maulik.Parekh 34 Report post Posted June 26, 2013 Ok .. Its working for me now .... I did following steps: 1. Downgraded to ICS (LG1). Even after downgrading did not work. 2. Enabled hidden menu and went to ##DATA 3. 1x/HDR was set already set to LTE+CDMA+EVDO 4. I toggled it to Hybrid and back to LTE+CDMA+EVDO 5. Under EVDO I also enabled DDMT. Can anyone tell me what is that ? --> I enabled without knowing what it is !! 6. No data ... then i put phone to airplane mode and back to normal ... and I see EVDO data. 7. Rebooted the phone twice ... Data is still available ... I am not sure what happened in backend. Gurus can throw some light. I am yet to upgrade to MB1 again. Will post results after upgrading to MB1. Share this post Link to post Share on other sites
cavarun 13 Report post Posted June 26, 2013 1. do we have to root the phone to flash modem.2. ##3282 does not work in 4.1.2 aka jelly bean Share this post Link to post Share on other sites
Maulik.Parekh 34 Report post Posted June 26, 2013 No no .. no need to root .. install modem thru odin .. Install hidden menu aa in previous post .. it should work ... Share this post Link to post Share on other sites
bigbyte 24 Report post Posted June 26, 2013 Maulik, did you downgrade full ROm or you downgraded just the modem and enabled the hidden menu and made changes to ##data ? Share this post Link to post Share on other sites
skssha 8 Report post Posted June 26, 2013 Here is one probable solution.Down grade radioEnable hidden menuUse hidden menu apk and open ##data settingSelect edit > other > 1x/hdr > lte+cdma+evdoDo not reboot.post if data works Downgraded my modem to LK5 and followed above mentioned trick, viola now evdo is working perfectly Share this post Link to post Share on other sites
Maulik.Parekh 34 Report post Posted June 26, 2013 There is MD1 update available on teamuscellular website without radio ... we cam use it if we want multi-windiw as well as older radio... I will post link once i am back ... 1 Share this post Link to post Share on other sites
Maulik.Parekh 34 Report post Posted June 26, 2013 Maulik, did you downgrade full ROm or you downgraded just the modem and enabled the hidden menu and made changes to ##data ? Unfortunately I downgraded the entire ROM and lost all data, but I think downgrading the radio must do the trick ... I am going to try that later today ... Share this post Link to post Share on other sites
RiteshDharod 5 Report post Posted June 26, 2013 Will the Downgrade of just Radio solve this problem , if so can u post the link to download Radio for s3 and Guide a little bit . No no .. no need to root .. install modem thru odin ..Install hidden menu aa in previous post .. it should work ... Kindly assist me how to install Modem and link for Modem. Share this post Link to post Share on other sites
skssha 8 Report post Posted June 26, 2013 Maulik, did you downgrade full ROm or you downgraded just the modem and enabled the hidden menu and made changes to ##data ? Unfortunately I downgraded the entire ROM and lost all data, but I think downgrading the radio must do the trick ... I am going to try that later today ... No need to downgrade rom.Only radio is sufficient.I have done only down grade of radio Share this post Link to post Share on other sites
kshah 452 Report post Posted June 26, 2013 @aboy I am experimenting with USC N2 so I have no links for s3 with me. Use ODIN to downgrade. Use only radio .bin file and .pit file to flash radio. Share this post Link to post Share on other sites
Maulik.Parekh 34 Report post Posted June 26, 2013 Installing Modem via ODIN in PDA Link to download MODEM http://teamuscellular.com/Forum/topic/3345-modems-uscc-sgs3-sch-r530u-recovery-or-odin-flashable/ 1 Share this post Link to post Share on other sites
RiteshDharod 5 Report post Posted June 26, 2013 Installing Modem via ODIN in PDA Link to download MODEM http://teamuscellular.com/Forum/topic/3345-modems-uscc-sgs3-sch-r530u-recovery-or-odin-flashable/ Which particular Modem/ Radio to download from the link so as to get Data back to work. Ok .. Its working for me now .... I did following steps: 1. Downgraded to ICS (LG1). Even after downgrading did not work. 2. Enabled hidden menu and went to ##DATA 3. 1x/HDR was set already set to LTE+CDMA+EVDO 4. I toggled it to Hybrid and back to LTE+CDMA+EVDO 5. Under EVDO I also enabled DDMT. Can anyone tell me what is that ? --> I enabled without knowing what it is !! 6. No data ... then i put phone to airplane mode and back to normal ... and I see EVDO data. 7. Rebooted the phone twice ... Data is still available ... I am not sure what happened in backend. Gurus can throw some light. I am yet to upgrade to MB1 again. Will post results after upgrading to MB1. How to get to this option ... method please ..( 2. Enabled hidden menu and went to ##DATA ) dont know how even after installing Hidden menu ... what commands to type to get to the 2nd option. Share this post Link to post Share on other sites
kshah 452 Report post Posted June 26, 2013 Here is solution for USC N2 where after upgrading modem to MB1, data breaks. Though this is not perfect solution, this does make DATA available on N2. One has to repeat this process every reboot. So I believe same must be applicable and good for S3. You are editing NV items so be careful. Don't do if you do not know what you are doing. Downgrade Radio from MB1 to LL1 Edit NV item 896 From 1 to 0 THis NV item is UIM_FIRST_INSTRUCTION_CLASS 0 is GSM (PHone will not read UICC ID) 1 is UMTS (Phone will read UICC ID but Data will not work) 2 is UICC 3 is UICC with other suffixes. Then follow this http://www.rimweb.in/forums/topic/35979-samsung-galaxy-s3/page-36#entry292974 OR http://www.rimweb.in/forums/topic/35979-samsung-galaxy-s3/page-36#entry292998 2 Share this post Link to post Share on other sites
Maulik.Parekh 34 Report post Posted June 26, 2013 I dont know why but after today evening ... after reboot DATA is not working ... earlier i had posted that it worked but now it is not .. I have to repeat steps after reboot ,,,, Share this post Link to post Share on other sites
Maulik.Parekh 34 Report post Posted June 26, 2013 Really messed up with NV !!! Lost Voice also ... any help is appreciated !!!! Share this post Link to post Share on other sites
kshah 452 Report post Posted June 27, 2013 Reprogram nam and prl. Also check if phone is configured to use nv only Share this post Link to post Share on other sites
Maulik.Parekh 34 Report post Posted June 27, 2013 I thought NAM and PRL it reads from RUIM. it is reading from RUIM i am able to see my MIN. Actually i had pressed rebuild NV in service menu. Also i had tried FTM mode Share this post Link to post Share on other sites
kshah 452 Report post Posted June 27, 2013 If RUIM based just check that RUIM CONFIG is RUIM ONLY. Do you have NV item backup? Share this post Link to post Share on other sites
thackervijay 16 Report post Posted June 27, 2013 Did anyone tried updating without the radio as someone shared earlier, on USC team website.Any success by doing that file update without hampering the evdo settings??? Share this post Link to post Share on other sites
parin 857 Report post Posted June 27, 2013 I thought NAM and PRL it reads from RUIM. it is reading from RUIM i am able to see my MIN. Actually i had pressed rebuild NV in service menu. Also i had tried FTM mode U Should not have Used NV Rebuild Share this post Link to post Share on other sites
Maulik.Parekh 34 Report post Posted June 27, 2013 Yes .. it is RUIM-only.. iam able to see MIN .. I dont have nv backup... Now what should i do? Worried ... Share this post Link to post Share on other sites
