joshm 818 Report post Posted July 22, 2013 Debloater script that amit has shared, i had verified it myself, The benefit is that this script removes the apk and its odexed file as well. Also this has been developed specifically for this mobile The best part is it removes crap and stores them in a folder called removed apps. Its safe and does its work in a second And amit one can use it with twrp recovery as well, which is my personal favourite. 2x NOTE that down........... 1 Share this post Link to post Share on other sites
vijaykv 5 Report post Posted July 23, 2013 i followed the step and checked the md5 file. however many of these unwanted apps are still there ... what do i do Share this post Link to post Share on other sites
amitroutray 384 Report post Posted July 23, 2013 (edited) Thank you Josh for your concern About the TWRP Recovery, The file I am sharing it now. Step 1. Download the TWRP Recovery file from here. Check the MD5: 6296D231A3BD67A584C2AA9A3E04FF5E The process will be the same for the process above mentioned… Step 2. Store it in to your Internal Storage of your phone. Step 3. Unplug the USB cable. Switch off your Phone. Step 4. Hold down the HOME + VOLUME UP buttons and press the POWER button for about 5 Seconds to enter into Recovery Mode. [MOST IMPORTANT TAKE THE Nandroid Backup] NOTE: The CWM recovery Nandriod Backup and TWRP recovery Nandriod Backup are not same. Step 5. Hit Install ZIP from SDcard and select the file TWRP_Flashable_Recovery.zip which you download from Step 1. Step 6. Then wipe cache partition go to Advance and wipe Dalvik cache go back and Hit Reboot System. This will Install TeamWin Recovery Project – or TWRP for short – is a fully touch-based custom recovery that was initially developed for Nexus devices, but has since been made available for countless other smartphones and tablets as well, in form of both official and third-party builds. Few Screen Shots : [ WARNING - flashing your phone, however safe the method may be termed, can BRICK your phone, so do it on your own , I or RIMWEB cant be held responsible for any BRICKED devices regards ] Have Fun Cheers Edited July 23, 2013 by amitroutray Share this post Link to post Share on other sites
amitroutray 384 Report post Posted July 23, 2013 @ Vijaykumar Flash it again. If still some application are there then Install the Titanium backup Root from Play Store. open it and goto Backup / Restore tab from the top. Select the apk from the list then hit Backup fast then UnInstall. then Reboot your phone. 1 Share this post Link to post Share on other sites
sougatadc 358 Report post Posted July 24, 2013 Went for an upgrade today with Cyanogenmod ROM to JB 4.2.2 (AOKP version mr1_milestone-2, Kernel version 3.4.53) and finally installed the latest GAPPS through recovery.e It's an all-new experience with almost everything from latest Nexus but one bad thing I'm noticing. This ROM cannot recognize my 64GB MSD card, while it's fine with my earlier 32GB Sandisk Ultra. So, it appears that the Cyanogenmod team didn't take into account the feature that USC SGS3 is designed to support 64GB card. It's frustrating after the update and having a 64GB card in hand. Is there any way out? 2 Share this post Link to post Share on other sites
sougatadc 358 Report post Posted July 24, 2013 The best part of this custom ROM is that it is supporting Conference Calling. I'll not revert back to stock even if it fails to support 64 GB card. I was desperately looking for conference calling. I'll use the 64 GB card with Nikon D90. 1 Share this post Link to post Share on other sites
rajanmehta 4,056 Report post Posted July 25, 2013 Went for an upgrade today with Cyanogenmod ROM to JB 4.2.2 (AOKP version mr1_milestone-2, Kernel version 3.4.53) and finally installed the latest GAPPS through recovery.e It's an all-new experience with almost everything from latest Nexus but one bad thing I'm noticing. This ROM cannot recognize my 64GB MSD card, while it's fine with my earlier 32GB Sandisk Ultra. So, it appears that the Cyanogenmod team didn't take into account the feature that USC SGS3 is designed to support 64GB card. It's frustrating after the update and having a 64GB card in hand. Is there any way out? Formatting your 64GB card with fat32 file system should fix the issue of it not being detected by Cyanogenmod ROM. 1 Share this post Link to post Share on other sites
bigbyte 24 Report post Posted July 26, 2013 The best part of this custom ROM is that it is supporting Conference Calling. I'll not revert back to stock even if it fails to support 64 GB card. I was desperately looking for conference calling. I'll use the 64 GB card with Nikon D90. How is the camcorder volume? Any problems with data? Share this post Link to post Share on other sites
huaweitrick 22 Report post Posted July 26, 2013 is wifi hotspot work in this custom rom.... Share this post Link to post Share on other sites
sougatadc 358 Report post Posted July 26, 2013 (edited) Absolutely no problem for data with MTS EVDO. Wifi hotspot flawless. It sports PhotoSphere camera of Nexus 4 with latest smart controls. I haven't tested camcorder yet. Edited July 26, 2013 by sougatadc 1 Share this post Link to post Share on other sites
huaweitrick 22 Report post Posted July 26, 2013 I m using rooted. 4.1.2 cmd recovery. When I click on wifi hotspot. With tata. .it show insert sim now........sent by huaweitrick@gmail.com (samsung s3 ) Share this post Link to post Share on other sites
snorlax 319 Report post Posted July 26, 2013 Try power toggle widget for hot spot. Hopefully it will work. Share this post Link to post Share on other sites
bigbyte 24 Report post Posted July 26, 2013 The best part of this custom ROM is that it is supporting Conference Calling. I'll not revert back to stock even if it fails to support 64 GB card. I was desperately looking for conference calling. I'll use the 64 GB card with Nikon D90. I installed the above ROM but still can't do conference call with Reliance. Will try it with tata and update. Don't have MTS sim to test. Share this post Link to post Share on other sites
sougatadc 358 Report post Posted July 26, 2013 I m using rooted. 4.1.2 cmd recovery. When I click on wifi hotspot. With tata. .it show insert sim now........ Use FoxFi. Download from google play store. You will be able to choose SSID name and use WPA password. Share this post Link to post Share on other sites
imdad 0 Report post Posted August 18, 2013 hi amit, I did everything which is explained but still i am unable to use data on my S3 CDMA ODIN worked fine as instructed. The CF-Auto-Root-d2usc-d2usc-schr530u also pass but still the data is not working i am extremely helples on this please help. Share this post Link to post Share on other sites
amitroutray 384 Report post Posted August 18, 2013 I did everything which is explained but still i am unable to use data on my S3 CDMA What is your Baseband Version ? If it is MD4 then plz refer to this topic: How To Get Data Working After Latest Jellybean Update On Galaxy S3 - US Cellular Share this post Link to post Share on other sites
alex2414 0 Report post Posted February 8, 2015 Hi friends. I have an sch-r530u and this can flash with odin, i have an issue on Nand Write. But i install a twrp recovery and i flash a cm 11 os. My sch-r530 its alive thanks to cm 11. But i don't have an IMEI number :0. Please i need one backup from one official sch-r530u, this can be with twrp recovery. Please very please i need this backup, grettings from México. Share this post Link to post Share on other sites
rawda 8 Report post Posted June 24, 2015 Hello I have a brand new R530 S3 on 4.4.2 network comes and goes any solution ? I have 2 phones with same problem Thanks Share this post Link to post Share on other sites
