Jat 11 Report post Posted November 29, 2013 Steps for Diagnostic Mode and getting Reliance CDMA 1. Install drivers and unlock the bootloader and root the device. I use Unified_Android_Toolkit (link : http://forum.xda-developers.com/showthread.php?t=2525026 ) 2. Get the MSL/SPC code Here are the steps :1. Connect your phone to your computer, with USB Debugging enabled.2. Open a command terminal, change directory to wherever you have the Android SDK's platform-tools installed.3. Enter "ADB devices" to ensure your device is properly connected. This should print your device's serial number.4. Enter "ADB logcat" to print the device log.At this point the terminal window will start vomiting up tons of information. Wait for the scrolling to stop and then continue.5. Now, on your phone, enter the dialer and type *#*#3282#*#*.6. Select "LTE/Edit" again.7. At this point the terminal on your PC should spit out a few more lines. A few of them will look like this:D/QC_RIL_OEM_HOOK(18638): sendOemRilRequestRaw returns value = 10V/LG_SVC_ITEMS(18638): length =6 responseBytes=REMOVED itemValue=******D/LG_SVC_ITEMS(18638): getCommands commandId 200 = ******-ENDD/LG_SVC_CMD(18638): itemID = 200, Value = ******Where the "*" values are the digits to your MSL. You can ALSO install CATLOG from playstore and it will show up the SPC/MSL code using the above steps. 3. In the download link below after unrar you will get a folder Nexus 5 Reliance, it contails all the files needed. Install Lg United Mobile Driver file provided. 4. Put your device into FASTBOOT mode (Volume down key + Power) and use the following command : fastboot boot boot.img. The device will reboot itself and you will see homescreen. 5. To open DIAG MODE : adb devices (you should see it shows device as connected and serial #) adb shell su setprop sys.usb.config diag,adb Nothing will happen on device but you would see the pc is busy installing various drivers and in Device Manager-àPorts (there will LGE AndroidNet USB Serial Port (ComXX)) 6. Connect DFS to the device (You have SPC code and port setup already with you) 7. Change the parameters for Reliance (assuming all knows what needs to be done) 8. To make sure EVDO settings gets written AND they don’t revert back to stock, use the LG.txt file and write it with Free NV reader/writer progam provided. Credit to this goes to rimweb user KanishkGandharv (link : http://www.rimweb.in/forums/topic/36320-sprint-lg-optimus-g-evdo-solution/ ) 9. You would be able to dial *228 and hear Reliance IVR welcoming you on the network 10. Get the MEID registered and you are good to go!!! Download link : http://www.mediafire.com/download/3wf9ilhsq9t1mux/Nexus%205%20Reliance.rar 10 Share this post Link to post Share on other sites
SUDYEcaZ 67 Report post Posted November 30, 2013 Is this applicable to all the N5 device? Or is it specific to North America Versions. If all device can the N5 available in India be programed? Share this post Link to post Share on other sites
Jat 11 Report post Posted November 30, 2013 Is this applicable to all the N5 device? Or is it specific to North America Versions. If all device can the N5 available in India be programed? I did this on my D820 which is US version. I don't think its gonna work on International version D821. An observation : If you change 'Network Mode' to Global/Insert GSM Sim card....Device picks up GSM PRL. In that case, need to connect with DFS and select CDMA_HDR again. Sent from my iPhone using Tapatalk Share this post Link to post Share on other sites
::: VA ::: 531 Report post Posted November 30, 2013 i thought members here were speculating that nexus 5 US version would run indian cdma omh out of box. guess that was only a wishful thinking. Share this post Link to post Share on other sites
HetalDP 947 Report post Posted December 2, 2013 N5 in India is D821 it have Exact same Radio (Software / Firmware) but CDMA Band is disabled at Hardware level N5 in USA have 2 Varients N5 16gb Sprint Version D820 N5 32gb/16gb Google Play Edition D820 dont know about sprint but Google Play can be configured via Patched Kernel which allows mounting DIAG port on /dev Call + SMS works fine MEID can be changed / SPC can be read via CDMA Workshop LG Method 3G(EVDO) is not stable We require Sprint SIMCard into slot to put the phone into CDMA Mode and EVDO to work / Once EVDO stops we have to reprogram device and reboot 1 Share this post Link to post Share on other sites
KanishkGandharv 46 Report post Posted December 4, 2013 @OP, can you make sure while the phone is set to CDMA_HDR only and you reboot the phone, does you are having same issues as Hetal ? Or your phone is working fine on reboots and without any simcard inserted? Share this post Link to post Share on other sites
rakeshm 1 Report post Posted January 11, 2014 I have a nexus 5 from US playstore. The box has IMEI number as well as MEID number. I have tested with GSM and it works perfectly. Don't know how to set it in CDMA. I have tried putting OMH sim, but the phone does not show any network. Any pointers for a newbie ? Thanks 1 Share this post Link to post Share on other sites
matrunner 0 Report post Posted February 4, 2014 i used it but no port opens in the US nexus 5. the port of LG doesnt turn up. tried in win 7 & win 8 too. wat is the issue ? how to rectify !!!!! will this work with SIm based ? or its only with MEID regist ? Share this post Link to post Share on other sites
garv 0 Report post Posted April 29, 2014 Steps for Diagnostic Mode and getting Reliance CDMA Hi Ragavan, I bought Nexus 5 d820 model from Google playstore US factory unlocked and was trying to follow your method. I could unlock the boot loader and boot in diag mode, however when I'm flashing reliance PRL it's not sticking at all. After reboot nothing happens and I don't get reliance tower. Could you help? I'm using the above method on out of the box new piece phone. The os is Kitkat 4.4.0. Share this post Link to post Share on other sites
matrunner 0 Report post Posted April 29, 2014 I was not succeeding I can't make any config thru CFS. Even tried one hr ago. I can't write though i have SpC code I can't unlock Sent from my Nexus 5 using Tapatalk Share this post Link to post Share on other sites
matrunner 0 Report post Posted May 10, 2014 Hitesh sir. Can u help? Nexus 5 gsm data service not working when tried to activate reliance cdma. Used only dfs. Calls and SMS is fine Sent from my Nexus 5 using Tapatalk Share this post Link to post Share on other sites
garv 0 Report post Posted May 10, 2014 Hi matrunner, Could you let me know how you did it? I tried above steps but won't work. And also did you had US Google play store d820 model? Share this post Link to post Share on other sites
ev1lb0ygen1us 27 Report post Posted May 14, 2014 Does EVDO works good with D820? I would love to try nexus 5, if RCDMA is really possible with it. Share this post Link to post Share on other sites
shreesh 406 Report post Posted May 14, 2014 Evdo is not stable. It requires sprint sim to work on cdma evdo mode. If evdo stops then again whole data configuration is required. Sent from my VS950 4G using Tapatalk 2 Share this post Link to post Share on other sites
ananth001 21 Report post Posted May 15, 2014 (edited) Does EVDO works good with D820? I would love to try nexus 5, if RCDMA is really possible with it.i could get evdo while on CDMA mode by keeping inserted a bsnl gsm sim on calkulin's stock based rom Edited May 17, 2014 by ananth001 Share this post Link to post Share on other sites
ezeuba 0 Report post Posted April 17, 2016 Can anyone help me out please? I did this with a CDMA network in Nigeria here and it worked but when I reverted back to GSM I cannot connect to data anymore. APN is still there and OK but no data. Is there any way I can revert back to factory settings so I can get the GSM data working again? Share this post Link to post Share on other sites