Tutorial: How To Flash Sprint Moto X & any Moto G CDMA To Reliance CDMA

[::Hitesh:: 1,763]

Sprint Moto X & any Moto G Flashed to Reliance CDMA

FINAL Photo Tutorial Updated:- 08/04/2014
New Method Works 100%
Follow easy to use , Modified Photo Tutorial
http://www.slideshare.net/hambarde/moto-g-ver3final

_________________________________________________________________________________________________

Tested on Verizon and confirmed to be working on Boost model.
1) First we need working wifi connection on phone
2) Then an APK from this link >> http://www.mediafire.com/download/i038c12rrdcbtlj/SPCUtility.apk
3) Allow this MSL app to use WiFi,
4) It gives you SPC, [Works on Verizon and Boost both] [Also works with sprint Moto X]
5) for boost Moto G and Sprint Moto X ##diag# works, but dose not work for Verizon.
6) For verizon Diag , Turn off mobile, remove usb cable, and Press both vol key + power button.
7) As soon as you leave these keys , one menu will pop-up.
8) use vol down keys to select BP Tools then connect use cable.
9) then press vol up . Phone will boot normally with DIAG turn ON.
10) for Boost ##diag# require SPC, which you will get it by SPC apk.
11) now PC will search for drivers (even latest moto driver pack dont have drivers for this)
12) attaching drivers for moto g DIAG. (install it manually) 64Bit Drivers | 32Bit Drivers
13) Use DFS, send SPC. and Put phone in Offline-A mode
14) then you need to change phone and min number to any 1234567890 to change PRL
15) till that time PRL wont change,
16) From DFS you can write AKey.
17) But for data need to use DUMP file,
18) you can use CW nv item write and write DATA DUMP, use free NV Item writer from CW http://www.cdma-ware.com/workshop/nv-items/NV-items_reader_writer.rar (get CW3.6 Dump after registration) here also need to put phone in Offline-A mode before writing DUMP to phone
19) after writing all above, go to DFS and change Min and MDN to ZERO so you will be ready for activation (*228).
20) As you always do - Hit Like


UPDATE :-
If phone is on 4.3, then you should first update to 4.4.2 then do above steps,
other wise you need to redo data settings and might have to flash PRL again.


Here are official drivers from Motorola http://www.mymotocast.com/download/MDM?platform=windows
I have not tested it but hope this works.
These official driver dont work, use above 32bit or 64bit drivers

Update : 19/03/2014
1)32bit Drivers mention in point no -12 are tested on WinXP 32bit and on Win7 32bit
2) 64bit Drivers are tested on Win7 & 8 64bit.
3) After factory reset, Min and akey stays as it is, But need to re-configure DATA and PRL.
4) One Click update to 4.4. for boost works perfectly from fastboot mode. Link [and it takes only 10min to update from 4.3 to 4.4.2]
5) Need to reconfigure PRL and DATA after one Click update [same as updating on Wifi]

Update 25/03/2014
Photo tutorial [Drivers and Sending SPC]
LINK removed, use link on top

Update 08-04-2014 (use link on top)
Photo tutorial [ Till voice and sms configuration]
Data config will be updated sooooon......
LINK removed, use link on top

Update :- 14apr14
Getting many msg about not finding software for using tutorial so here are all the software required


Dfs demo
http://cdmatool.com/downloadFiles/application/Setup%20DFS%2014.03.26.0.zip
Nv writer 3.6
http://www.cdma-ware.com/workshop/nv-items/NV-items_reader_writer.rar
Spc apk
http://www.mediafire.com/download/i038c12rrdcbtlj/SPCUtility.apk
32bit drivers moto g & x
https://www.mediafire.com/?ic25458youq1xd9
64 bit drivers
https://www.dropbox.com/s/ucr03xx6esqtcdc/DroidX_Diag_x64.rar

Moto G MTP Drivers For Win XP SP3 [Modded by Me]

https://www.dropbox.com/s/37hpk21lc26h78i/wpdmtp.inf

Sent by Moto G on Reliance CDMA

DroidX_Diag_x64.rar

Edited April 24, 2014 by ::Hitesh::

[Genius 817]

Moto G Flashed to Reliance CDMA

after long time some phone has been worked upon

[rajanmehta 4,056]

<< New Topic created, Split from Motorola Announces Moto G >>

------------------------------------------------------------------------------------

Awesome!

Will Thank Hitesh in Motorola Language for sharing!

Exceptional Phone, Exceptional Price & Above all exceptional helping / sharing Member!

[::Hitesh:: 1,763]

^^^

Thanks for making it new thread, I was going to new post thread but then though of continuing the old one,

But you are the best judge !!

Thanks again !

[::Hitesh:: 1,763]

On Moto G do not try *#*#33666633*#*#

Phone will reboot to DEMO mode and you wont be able to do anything, on every reboot all data will be lost as its in DEMO mode.

to get out of DEMO mode, need to do wipe from stock recovery !!

So stay away from demo code !!

For bypassing initial activation screen just press home key or recent app key, phone will skip activation !

[cooladitya007 41]

Great work hitesh ji.

does it have a Uim slot?

Edited February 18, 2014 by cooladitya007

[digitalnirvana 646]

I am going to like each post that HH makes on this thread

Awesome work mate

[KanagaDeepan 1,084]

Double LIKE Hitesh ji... Nowadays you are in fire breathing mode... Nice selfless contributions and very very happy to see you back to the form... Hats off to you boss...

[::Hitesh:: 1,763]

Great work hitesh ji.

does it have a Uim slot?

Nop no uim slot on boost or Verizon

Actually back cover is same as one Sim moto g , but its covered (blocked) and on main board no place to solder Sim slot ..

Tapping from Verizon moto G

Sent from my XT1028 using Tapatalk

[ankurcshah 112]

Any help on getting the spc?

Sent from my SPH-L900 using Tapatalk 2

[loypalm 9]

So it will need MEID registration for programming on reliance CDMA?

[ruiner21 43]

Will boost mobile moto g have the same developer support as verizon one??

[::Hitesh:: 1,763]

^^^

Yes, Both will have same support,

But Boost one can be bootloader unlocked

[varkey 51]

Thanks Hitesh for the step by step instructions!

[varkey 51]

Any help on getting the spc?

Sent from my SPH-L900 using Tapatalk 2

Step 2 - SPCUtlility will give you the SPC.

[varkey 51]

So it will need MEID registration for programming on reliance CDMA?

Yes

[Deepak Shankar 79]

Thanks for the step by step Instructions Hitesh Bhai

[pbp76 1]

Moto G Flashed to Reliance

hit LIKE and also hit LIKE HITESH SO MUCH

lol

hats off to you n your hard work

[::Hitesh:: 1,763]

UPDATE :-

If phone is on 4.3, then you should first update to 4.4.2 then do above steps,

other wise you need to redo data settings and might have to flash PRL again.

[digitalnirvana 646]

Like karne walo ko like karne ka bahaana chahiye

Kya baat HH

[rajupandit 0]

Thanks Hitesh for sharing this wonderful post.
I am a complete noob when it comes to CDMA technology.
I am a vodafone customer and came here and registered specially becasue of this Moto G deal.
The deal is quite tempting and its really hard to resist.

Now the thing is, that i dont get all these technical terms.
I do not understand what do u mean by the following :

3) Allow this MSL app to use WiFi,

4) It gives you SPC, [Works on Verizon and Boost both]

5) for boost ##diag# works, but dose not work for Verizon.

6) For verizon Diag , Turn off mobile, remove usb cable, and Press both vol key + power button.

7) As soon as you leave these keys , one menu will pop-up.

8) use vol down keys to select BP Tools then connect use cable.

9) then press vol up . Phone will boot normally with DIAG turn ON.

10) for Boost ##diag# require SPC, which you will get it by SPC apk.

11) now PC will search for drivers (even latest moto driver pack dont have drivers for this)

12) attaching drivers for moto g DIAG. (install it manually) DroidX_Diag_x64.rar 106.95KB 24 downloads

13) Use DFS, send SPC.

14) then you need to change phone and min number to any 1234567890 to change PRL

15) till that time PRL wont change,

16) From DFS you can write AKey.

17) But for data need to use DUMP file,

18) you can use CW nv item write and write DATA DUMP, use free NV Item writer from CW http://www.cdma-ware...ader_writer.rar (get CW3.6 Dump after registration)

19) after writing all above, go to DFS and change Min and MDN to ZERO so you will be ready for activation (*228).

I could not understand a single one of the above terms.

please could you explain me the detailed procedure as to how can i really get this thing working ?
or is there someone here in delhi who could help me out doing this ?
some place here in delhi ? some mobile repair shop guy ?
or can the relaince customer care guyd do it for me if i take the phone there ?

Please can someone help me out ? I'd be highly obliged.

Thanks in advance

[shreesh 406]

Read my signature and Add me on gtalk!

Sent from my VS950 4G using Tapatalk 2

[::Hitesh:: 1,763]

Thanks Hitesh for sharing this wonderful post.

I am a complete noob when it comes to CDMA technology.

I am a vodafone customer and came here and registered specially becasue of this Moto G deal.

The deal is quite tempting and its really hard to resist.

Now the thing is, that i dont get all these technical terms.

I do not understand what do u mean by the following :

/....

.../

I could not understand a single one of the above terms.

please could you explain me the detailed procedure as to how can i really get this thing working ?

or is there someone here in delhi who could help me out doing this ?

some place here in delhi ? some mobile repair shop guy ?

or can the relaince customer care guyd do it for me if i take the phone there ?

Please can someone help me out ? I'd be highly obliged.

Thanks in advance

Do u have cdma version of Moto g and want to flash it for reliance cdma?

Then check ur pm, I have a special msg for u!

tapatalking.....

Edited February 21, 2014 by ::Hitesh::

[Dushie 30]

Any luck in getting the same working with Tata. I am still on my old Nexus and want to move to Moto G. Is there an option of getting Tata indicom working on boost Moto G.

[::Hitesh:: 1,763]

Problem with TATA activation is you wont get EVDO with registration

for EVDO you need to change meid of phone, which is not possible in moto g.

so you can use same method for tata till 1x data.

thanks