keval32 25 Report post Posted June 30, 2014 Hello everyone, I was so desirous to use Kitkat on my G2, the only thing was barrier to my desire was no data on OMH and I didn't wanted to use in on NV. I was so desperate and was messing with it since long, yesterday, something clicked in my mind, I have marked that it was showing 'Service Disabled' on lock screen when CDMA SIM was in. I thought it must be something related to internal lock that is preventing device to get connected to data. I started exploring build.prop and yes, here it was. I found solution. So, here you go! It has cons as well, I have discussed them below, I hope veterans like Vinod ji and others will have solution for it. Have a look and enjoy! Here is the tutorial : Requirements : 1- Must be on Kitkat (Of course, lol!) 2- Must be rooted 3- Must have ROM Toolbox Lite or Root Explorer Execute ROM Toolbox Lite and go to performance tab by sliding your finger left, there is "build.prop Editor", click it and it will present to you with lots of texts, find ' ro.build.target_operator ' as below : <a href="http://imgur.com/zRNRjfb"><img src="http://i.imgur.com/zRNRjfb.png" title="Hosted by imgur.com" /></a> Your phone must have it's value as SPR, change its value to REL as shown in the above pic and restart. Whoila! You have data on Kitkat on OMH! But wait, there are cons : 1- You will have to dial 0 before calling, else, phone application will crash. Wifi works perfectly for me!. 2- You will have that old looking thick network signal bars. I absolutely hate it and I am working to get those slim and modern looking network signal bars back. (Vinod ji, please help!) 3- Wifi hotspot not working at all. (Working on that too) You can lock the device back by changing value to SPR and you will have those slim network signal bars again with no data! So, those were cons, I have not found anything else since last 24 hours. Some of you guys may discover. Thank you all and sorry for such lengthy tutorial as I could just have said ; "Edit build.prop and change ' ro.build.target_operator ' value to REL!" 11 Share this post Link to post Share on other sites
keval32 25 Report post Posted June 30, 2014 Friends, as Vinod ji just suggested, if you want that slim network signal bars and the spark 3g icon, please put up 'spr' without quotes as value. Thanks Vinod ji, for pointing out. Share this post Link to post Share on other sites
drmadhu 87 Report post Posted June 30, 2014 Try to change SPR to OPEN and give Result Sent from my LG-LS980 using Tapatalk Share this post Link to post Share on other sites
kuduku 24 Report post Posted June 30, 2014 (edited) Nice Was this inspiration ? http://forum.xda-developers.com/showpost.php?p=52915223&postcount=814&nocache=1&z=2307072603143751 Need to try it out . Edited July 1, 2014 by kuduku Share this post Link to post Share on other sites
drmadhu 87 Report post Posted June 30, 2014 Below is my build prop screenshots in working omh in JB ZV8. Sent from my LG-LS980 using Tapatalk Share this post Link to post Share on other sites
keval32 25 Report post Posted July 1, 2014 @kuduku No it was not an inspiration, but, it seems interesting, need to try out. Hotspot might work that way. I am trying now, lets see. Share this post Link to post Share on other sites
Vinod Nayak 443 Report post Posted July 1, 2014 (edited) Hmmm we need to know if the data works on ZVC on OMH. DATA on any build below ZVC works without any edit. Edited July 1, 2014 by Vinod Nayak Share this post Link to post Share on other sites
keval32 25 Report post Posted July 1, 2014 @Vinod Yes, data works on ZVC on OMH, this post is all about that. Didn't it work for you? Share this post Link to post Share on other sites
bigbyte 24 Report post Posted July 1, 2014 Hello everyone, 1- You will have to dial 0 before calling, else, phone application will crash. Wifi works perfectly for me!. This is taken from the xda thread but I feel it is worth a try to fix the above issue... "To fix the issue of the com.android.phone process crashing when you don't dial a 1 in front of the number edit the /data/data/com.android.providers.settings/databases/settings.db file with a SQLlite editor and change in the "system" table "assist_dial" and "assist_dial_init_db_check" to "0". If you don't see those 2 rows then you can add them. Fix permissions, wipe cache and reboot." Source http://forum.xda-developers.com/showpost.php?p=:52915223&postcount=814&nocache=1&z=2307072603143751 Share this post Link to post Share on other sites
st_7 138 Report post Posted July 3, 2014 @Keval32, I couldn't stop laughing when I saw your solution(it was such a simple & well known solution but still no one thought about it), it was the first method that was tried to unlock Sprint LG G2 for GSM networks and every one used that till 'Carrier' folder method was published. And yet no one(including me) tried it for RUIM DATA problem in Kitkat, we didn't even got the thought of trying it , instead we were banging our heads. Thanks for the tip any way. Share this post Link to post Share on other sites
keval32 25 Report post Posted July 4, 2014 @st_7 Yes buddy, I also thought so, I guess we didn't tried because G2 veteran Vinod exhausted and said he didn't find anything yet. Btw, any solution for Wifi Hotspot buddy? I am trying hard to get it working but nothing so far, I even tried replacing service.jar and others, but, still hotspot never started. Share this post Link to post Share on other sites
keval32 25 Report post Posted July 4, 2014 Hello everyone, 1- You will have to dial 0 before calling, else, phone application will crash. Wifi works perfectly for me!. This is taken from the xda thread but I feel it is worth a try to fix the above issue... "To fix the issue of the com.android.phone process crashing when you don't dial a 1 in front of the number edit the /data/data/com.android.providers.settings/databases/settings.db file with a SQLlite editor and change in the "system" table "assist_dial" and "assist_dial_init_db_check" to "0". If you don't see those 2 rows then you can add them. Fix permissions, wipe cache and reboot." Source http://forum.xda-developers.com/showpost.php?p=:52915223&postcount=814&nocache=1&z=2307072603143751 I can confirm that above method didn't work for me. It still crashes phone application. 1 Share this post Link to post Share on other sites
josh596007 26 Report post Posted July 10, 2014 Now in Kitkat with DATA with RCDMA OMH .. . just changed ' ro.build.target_operator ' value to spr Calls going through even for numbers not starting with 0 (No Crashes ) Share this post Link to post Share on other sites
drmadhu 87 Report post Posted July 10, 2014 Can u check wifi or wifi hotspot It will crash in jb after changing this value Sent from my LG-LS980 using Tapatalk Share this post Link to post Share on other sites
keval32 25 Report post Posted July 10, 2014 Now in Kitkat with DATA with RCDMA OMH .. . just changed ' ro.build.target_operator ' value to spr Calls going through even for numbers not starting with 0 (No Crashes ) Great buddy, did you perform any tweaks for that crash thing? If so, plz share. Share this post Link to post Share on other sites
keval32 25 Report post Posted July 10, 2014 I have found temporary fix for wifi hotspot on KitKat, if you want wifi hotspot on the go just change value to TMO, you will have zero network signal bars but it will be connected to the network and you will be able to turn on data as well as hotspot. Hotspot application will crash but hotspot will tuen on. Share this post Link to post Share on other sites
rijujeevan 1 Report post Posted July 10, 2014 Hi, Updated to kit Kat and got data to work in reliance cdma omh. No crashes on calls.only problem is that tethering not working.I don't know how it's happened,in jelly been dialer app was crashing while changing target operator or country. Things I have done, Flashed ZV7.tot>rooted>unlocked by carrier folder method>took ZV8,ZVA and ZVC ota >rooted>changed to.build.target_operator to REL> data worked but dialer crashed>changed value to spr>Restart>every thing works fine except WiFi tether.. Share this post Link to post Share on other sites
kuduku 24 Report post Posted July 11, 2014 (edited) I have tried with spr REL TMO and OPEN on using OPEN no crashes and no 1 signal bug , shows proper full signals . Signal bars are thick . I tried it in GSM as my RUIM is not catching any signal . It reads MIN correctly from RUIM and shows it . Its on RUIM only using DFS . Done TOT from ZV8 to ZVC . Whenever i change any of these from SPR the proximity sensor stops working . Can any one confirm this . SystemUI has crashed error comes intermittently when once/twice but fully usable mobile . One advantage of this is that amount of free RAM doubles over . I had generally 300MB free , now after a reboot atleast 1000MB free . Can any one tell why ? EDIT Proximity sensor working fine , just option cannot be activated in menu . During calls when mobile is brought near to face , screen does switch off Edited July 11, 2014 by kuduku Share this post Link to post Share on other sites
lipakprusty 3 Report post Posted July 27, 2014 I. tried spr, OPEN.. can see 3g symbol in the task bar but no Internet.. is it phone issue or carrier.. I am in MTS prepaid, got an omh Sim yesterday, phone has been recharged for both 2g and 3g.. any clue.. thanks Share this post Link to post Share on other sites
rijujeevan 1 Report post Posted August 2, 2014 Any updates on wifi tether unlock.. Share this post Link to post Share on other sites
vipsy6 4 Report post Posted March 25, 2015 Hello All, I have tried OP solution and I am getting error on start up after reboot like "Unfortunately, process com.android.systemui has stopped". and "Unfortunately Home has stopped" I am not able to access the phone thereafter. It gets popup constantly. Kindly advise the solution. Share this post Link to post Share on other sites
varkey 51 Report post Posted May 25, 2015 Does this continue to work with the Lollypop update? Share this post Link to post Share on other sites
Vinod Nayak 443 Report post Posted May 25, 2015 Lollipop does not need any tweak, Data works without any build.prop edit by default. 1 Share this post Link to post Share on other sites
varkey 51 Report post Posted May 25, 2015 Lollipop does not need any tweak, Data works without any build.prop edit by default. Awesome, thanks for the confirmation. Share this post Link to post Share on other sites
varkey 51 Report post Posted May 27, 2015 Lollipop does not need any tweak, Data works without any build.prop edit by default. I got my Verizon G2 today VS980 and OMH data doesn't appear to be working. I am still on Kitkat 4.4.2 though. There are no errors or anything, it just doesn't connect. Will try updating to Lollipop and see if it works. Share this post Link to post Share on other sites