shreesh 406 Report post Posted September 24, 2014 34hrs Share this post Link to post Share on other sites
bharat5143 0 Report post Posted September 25, 2014 Hi I am using moto g which was running well along with data on 4.4.2 but did update it to 4.4.4 on this sunday. So I guess I will have to reprogramme it but the installed drivers do not detect this updated phone. So i have find another drivers or the old drivers shd work for DFS ? I wanted to PM you on rimweb but do not know how to do, so email you personally. please help me ..... Share this post Link to post Share on other sites
::: VA ::: 531 Report post Posted September 25, 2014 34hrs Yeah, he is on a paid leave to travel and tinker with his moto g Share this post Link to post Share on other sites
axiprash 7 Report post Posted September 25, 2014 Dear Friends, I had updated MOTO G Boost to Kitkat 4.4.4. I had to Downgrade it. So i downloaded and flashed " falcon_boost_user_4.3_14.10.0Q3.X-84-9_11_release-keys-cid9.xml " When was flashing the above Script i had only on error, and rest all succeeded The Error WAS as follows : " C:\Users\Notebook\Desktop\fastboot>fastboot flash partion gpt.bin target reported max download size of 536870912 bytes sending 'partion' (32 KB)... OKAY [ 0.034s] writing 'partion'... (bootloader) Permission denied FAILED (remote failure) finished. total time: 0.058s " where as on Screen(Device) cmd: getvar:partion-type:partion cmd: getvar:max-download-size cmd: :Download:00008000 cmd: :flash:partion and now the phone is rebooting... and rebooting and rebooting in interval of 1-2 min in meanwhile it says Statring Service..... and again reboots.. NOTE : the Devie is UNLOCKED. Status Code:3 Please guide May i have the Solution for this... Share this post Link to post Share on other sites
::Hitesh:: 1,763 Report post Posted September 25, 2014 (edited) Hi I am using moto g which was running well along with data on 4.4.2 but did update it to 4.4.4 on this sunday. So I guess I will have to reprogramme it but the installed drivers do not detect this updated phone. So i have find another drivers or the old drivers shd work for DFS ? I wanted to PM you on rimweb but do not know how to do, so email you personally. please help me ..... Drivers for all MOTO G are same, no need for new drivers, you should have Reliance PRL and DATA dump for your phone's meid. Nothing more is required. Dear Friends, I had updated MOTO G Boost to Kitkat 4.4.4. I had to Downgrade it. So i downloaded and flashed " falcon_boost_user_4.3_14.10.0Q3.X-84-9_11_release-keys-cid9.xml " When was flashing the above Script i had only on error, and rest all succeeded The Error WAS as follows : " C:\Users\Notebook\Desktop\fastboot>fastboot flash partion gpt.bin target reported max download size of 536870912 bytes sending 'partion' (32 KB)... OKAY [ 0.034s] writing 'partion'... (bootloader) Permission denied FAILED (remote failure) finished. total time: 0.058s " where as on Screen(Device) cmd: getvar:partion-type:partion cmd: getvar:max-download-size cmd: :Download:00008000 cmd: :flash:partion and now the phone is rebooting... and rebooting and rebooting in interval of 1-2 min in meanwhile it says Statring Service..... and again reboots.. NOTE : the Devie is UNLOCKED. Status Code:3 Please guide May i have the Solution for this... Just did this two days back, your phone will be rebooting from Home screen or after few min of full boot. This is due to Radio / Modem, I was on same stage while downgrading. even if you install custom rom it will do same. (reboot) you need to flash 4.4.4 modem partition on this. download this partition table updater file :- https://s.basketbuild.com/filedl/devs?dev=SuperR&dl=SuperR/Motorola/falcon/falcon_KXB21.14-L1.57_partition_updater_2.zip put phone in Recovery [twrp] Push this zip file to /sdcard/ , or if you are luck you can get MTP drive for sufficient time. just copy it to phone. Flash using TWRP 2.7.0.0 Or Download this rar file, https://www.dropbox.com/s/5vpu1uj15j48v6x/Boost_4.4.4_390.81.01P.rar?dl=0 which content radio dump from 4.4.4 Extract IMG file and push it to /sdcard/ then using DD command in adb shell you can restore radio partition. ADB shell will work in recovery , you need TWRP 2.7.0.0 for that. here is command for DD from ADB shell. dd if=/sdcard/radio_firmware.img of=/dev/block/platform/msm_sdcc.1/by-name/modem Edited September 25, 2014 by ::Hitesh:: 3 Share this post Link to post Share on other sites
::Hitesh:: 1,763 Report post Posted September 25, 2014 (edited) Any one with working stock 4.4.2 from boost moto g? Need a rooted device to pull few partitions from working phone thru adb shell and DD command. No harm for your device, just 20min for pulling files, and if possible upload of those files too. Mainly I need modem partition which is 67mb and after zip 25mb. So any one willing to spare some time and upload few mb.? If not rooted, will root your device . also will reprogram his/her phone for every update . Edited September 25, 2014 by ::Hitesh:: Share this post Link to post Share on other sites
bharat5143 0 Report post Posted September 25, 2014 Hi hitesh, am still on 4.4.2 u can take the above details if you want ... Share this post Link to post Share on other sites
axiprash 7 Report post Posted September 26, 2014 (edited) Hi I am using moto g which was running well along with data on 4.4.2 but did update it to 4.4.4 on this sunday. So I guess I will have to reprogramme it but the installed drivers do not detect this updated phone. So i have find another drivers or the old drivers shd work for DFS ? I wanted to PM you on rimweb but do not know how to do, so email you personally. please help me ..... Drivers for all MOTO G are same, no need for new drivers, you should have Reliance PRL and DATA dump for your phone's meid. Nothing more is required. Dear Friends, I had updated MOTO G Boost to Kitkat 4.4.4. I had to Downgrade it. So i downloaded and flashed " falcon_boost_user_4.3_14.10.0Q3.X-84-9_11_release-keys-cid9.xml " When was flashing the above Script i had only on error, and rest all succeeded The Error WAS as follows : " C:\Users\Notebook\Desktop\fastboot>fastboot flash partion gpt.bin target reported max download size of 536870912 bytes sending 'partion' (32 KB)... OKAY [ 0.034s] writing 'partion'... (bootloader) Permission denied FAILED (remote failure) finished. total time: 0.058s " where as on Screen(Device) cmd: getvar:partion-type:partion cmd: getvar:max-download-size cmd: :Download:00008000 cmd: :flash:partion and now the phone is rebooting... and rebooting and rebooting in interval of 1-2 min in meanwhile it says Statring Service..... and again reboots.. NOTE : the Devie is UNLOCKED. Status Code:3 Please guide May i have the Solution for this... Just did this two days back, your phone will be rebooting from Home screen or after few min of full boot. This is due to Radio / Modem, I was on same stage while downgrading. even if you install custom rom it will do same. (reboot) you need to flash 4.4.4 modem partition on this. download this partition table updater file :- https://s.basketbuild.com/filedl/devs?dev=SuperR&dl=SuperR/Motorola/falcon/falcon_KXB21.14-L1.57_partition_updater_2.zip put phone in Recovery [twrp] Push this zip file to /sdcard/ , or if you are luck you can get MTP drive for sufficient time. just copy it to phone. Flash using TWRP 2.7.0.0 Or Download this rar file, https://www.dropbox.com/s/5vpu1uj15j48v6x/Boost_4.4.4_390.81.01P.rar?dl=0 which content radio dump from 4.4.4 Extract IMG file and push it to /sdcard/ then using DD command in adb shell you can restore radio partition. ADB shell will work in recovery , you need TWRP 2.7.0.0 for that. here is command for DD from ADB shell. dd if=/sdcard/radio_firmware.img of=/dev/block/platform/msm_sdcc.1/by-name/modem tried the 1st PArt Said [before "OR"] was not on TWRP 2.7.0.0... SO got to Downloaded it from a link "http://crackflasher.com/twrp-2-7-0-0-falcon-img-moto-g-dhacker29/" (phone was not starting... in that case had to Sideload) TWRP>ADVANCED>ADB Sideload on computer/Notebook/ type -> adb sideload <file_name> the contents will be copied to tmp folder & will be renamed as sideload.zip | V tried by Sideload... Just copied the zip to sideload and was stored in the /tmp/ & was able to flash the ZIP but error flashes... ON PC ------------ then copied all the files in Fastboot folder where all adb n fastboot files are present.. RUN Script : <before running below script, extract all contents of current zip file uploaded by Hitesh sir and place/overwrite over prvs one...> SET fastboot=fastboot.exe %fastboot% flash partition gpt.bin ' this is where u will get success %fastboot% reboot-bootloader %fastboot% flash logo logo.bin %fastboot% flash boot boot.img %fastboot% flash recovery recovery.img %fastboot% flash system system.img_sparsechunk1 %fastboot% flash system system.img_sparsechunk2 %fastboot% flash system system.img_sparsechunk3 %fastboot% flash modem NON-HLOS.bin %fastboot% erase modemst1 %fastboot% erase modemst2 %fastboot% flash fsg fsg.mbn %fastboot% erase cache %fastboot% erase userdata pause here then u will get the Phone started for few mins say 1-2 mins... then immd you copy the original file Uploaded by hitesh Sir [before 'or'] {falcon_KXB21.14-L1.57_partition_updater_2} and copy to you Device then again come to TWRP 2.7.0.0 and flash ... "falcon_KXB21.14-L1.57_partition_updater_2" installation/flashing goes smooth. (PLEASE NOTE: after flashing the above code the stock recovery is been flashed, so do FLASH CUSTOME RECOVERY Again :-) ) Phone got a SOUL- A Life... all credits goes to Hitesh Sir... I just shared my Experience.. HITesh @ what i observed is Change of MIN Number...??? Can you please clarify it, if known??? thank you, Prashant No Network.. should flash PRL... but DIAG DISABLED also the SPC/MSL is not working... by default the DIAG Mode is Disabled.. when tried to enable the SPC : 000000 PRvsly set. is not working .. when read the Phone SPC / MSL it Prompeted to Nothing"NULL" and a SPACE " " or Blank was seen on the Read Status MSL utility Phone is ON ... but not SIgnal (as PRL needs to be Written) Please Assist Edited September 26, 2014 by axiprash Share this post Link to post Share on other sites
girish33 1 Report post Posted September 26, 2014 i am stuck with 4.4.4 Verizon stock Rom on my Moto G which cannot be rooted. Please suggest any solution to retrieve it. Share this post Link to post Share on other sites
::Hitesh:: 1,763 Report post Posted September 26, 2014 @axiprash use BP tools method to get diag mode. Like we use with Verizon moto g @girish do you have boost moto g? And flashed Verizon ? Then you need to revert back to boost stock. If its Verizon then stay as it is. 1 Share this post Link to post Share on other sites
girish33 1 Report post Posted September 26, 2014 @ Hitesh: i have Verizon Moto G stock version from the beginning I updated it to 4.4.4 and tried to get SPC with MSL Utility but it failed. Now i cannot program it as i don't know SPC and also my Verizon Moto G (XT1028) cannot be routed like Boost model so i am stuck with this device. Share this post Link to post Share on other sites
::Hitesh:: 1,763 Report post Posted September 26, 2014 you cannot rollback verizon, as bootloader is locked. but your spc wont change from 4.4.2 to 4.4.4 so try your old spc.. Share this post Link to post Share on other sites
mcnu 5 Report post Posted September 26, 2014 Any one with working stock 4.4.2 from boost moto g? Need a rooted device to pull few partitions from working phone thru adb shell and DD command. No harm for your device, just 20min for pulling files, and if possible upload of those files too. Mainly I need modem partition which is 67mb and after zip 25mb. So any one willing to spare some time and upload few mb.? If not rooted, will root your device . also will reprogram his/her phone for every update . Hitesh, i have a Boost Moto G with 4.4.2. Share this post Link to post Share on other sites
axiprash 7 Report post Posted September 27, 2014 @ Hitesh: i have Verizon Moto G stock version from the beginning I updated it to 4.4.4 and tried to get SPC with MSL Utility but it failed. Now i cannot program it as i don't know SPC and also my Verizon Moto G (XT1028) cannot be routed like Boost model so i am stuck with this device. I too had same problem... Do one thing you need to reset the DIAG by default to ENABLED. just GO to Bootloader Select BPTools (VOL Up+) now ur phone will restart in, by default DIAG Enabled... So enjoy... oPeN DFS / NV WRITER.... send SPC 000000 or PRVS one whichever u have initially Program... Success... :-) @axiprash use BP tools method to get diag mode. Like we use with Verizon moto g @girish do you have boost moto g? And flashed Verizon ? Then you need to revert back to boost stock. If its Verizon then stay as it is. Thank you a lot for help... Share this post Link to post Share on other sites
::Hitesh:: 1,763 Report post Posted September 27, 2014 (edited) Here is the link for fastboot 4.4.4 boost moto g. http://www.filefactory.com/file/42f2hnqhrhjr/falcon_boost_user_4.4.4_KXB21.14-L1.57_57_release-keys-cid9.xml.zip It will full wipe your device and delete all data including SD card. It is factory original image. Need to flash thru fastboot. Sent from my XT1031 using Tapatalk 2 Edited September 27, 2014 by ::Hitesh:: 1 Share this post Link to post Share on other sites
bharat5143 0 Report post Posted September 28, 2014 I am trying to reprogramming for moto g but the min nunber shows 0000000000 ... have I done anything wrong??? Gurus please help! Share this post Link to post Share on other sites
axiprash 7 Report post Posted September 28, 2014 ask Reliance to Remove the Number from your handset make handset blank... in Short Release the Handset from Your Number... TAke your Number on SIM.... Later Ask them Again to Put the Other Number On the Same MEID/HANDSET prior 2 days ... You will get the MIN Number Back.. ([{ I tried other Number.... <as i got MIN> you can also ask to Put the Same Number and Give a TRY... when i asked Reliance Store to Remove the my Number and re-insert/flash same number Again then they did as SAID. But Nothing Worked for ME...(as might the time SPAN was vin SECS/MINs so it might had not worked) WHat Worked is OTHER Number.. also FLASHING OTHER Number you NEED to KEEP THE MEID BLANK for more than 1 day... HURRY Messes the THINGS ... So you need to Give TIME & Most important Have Patience :-) bEsT LuCk }]) This is what i did and got a worth lesson... Share this post Link to post Share on other sites
::Hitesh:: 1,763 Report post Posted September 28, 2014 You used wrong tutorial. Use ##000000# and put your min back Sent from my XT1031 using Tapatalk 2 Share this post Link to post Share on other sites
bharat5143 0 Report post Posted September 28, 2014 Thanks , Intially I did not note my min number and after my first attempt of programming I noted my min which is 0000000000... is there any way to reterive it now .... Share this post Link to post Share on other sites
::Hitesh:: 1,763 Report post Posted September 29, 2014 Give re-otaf request in WW Sent from my XT1031 using Tapatalk 2 Share this post Link to post Share on other sites
bharat5143 0 Report post Posted September 29, 2014 By reotaf u mean to say I have to resubmit the transfer request in web world? Please excuse me for asking these stupid questions ... Share this post Link to post Share on other sites
axiprash 7 Report post Posted September 29, 2014 Here is the link for fastboot 4.4.4 boost moto g. http://www.filefactory.com/file/42f2hnqhrhjr/falcon_boost_user_4.4.4_KXB21.14-L1.57_57_release-keys-cid9.xml.zip It will full wipe your device and delete all data including SD card. It is factory original image. Need to flash thru fastboot. Sent from my XT1031 using Tapatalk 2 Dear i flashed the 4.4.4. to My MOTO G. everything is working fine... but not the DATA.. Data in not working/starting... Also i set the MObile Main Setting > DS QxMIP - to - Simple IP Then too data not working.. As prvs it was working like a charm... Any idea... Thank you, Prashant Share this post Link to post Share on other sites
bharat5143 0 Report post Posted September 29, 2014 I searched my old phone which is still blank and carried the same number. The phone has min number, I copied it to my moto g but the phone still does not show the network. Am I something wrong or writting wrong prl to it?? Share this post Link to post Share on other sites
::Hitesh:: 1,763 Report post Posted September 29, 2014 By reotaf u mean to say I have to resubmit the transfer request in web world? Please excuse me for asking these stupid questions ...Its something like reactivation of number on same RSN Here is the link for fastboot 4.4.4 boost moto g. http://www.filefactory.com/file/42f2hnqhrhjr/falcon_boost_user_4.4.4_KXB21.14-L1.57_57_release-keys-cid9.xml.zip It will full wipe your device and delete all data including SD card. It is factory original image. Need to flash thru fastboot. Sent from my XT1031 using Tapatalk 2 Dear i flashed the 4.4.4. to My MOTO G.everything is working fine... but not the DATA.. Data in not working/starting... Also i set the MObile Main Setting > DS QxMIP - to - Simple IP Then too data not working.. As prvs it was working like a charm... Any idea... Thank you, Prashant Write data dump nv item thru cdma workshop, and then write simple IP and HDR user name pass via dfs I searched my old phone which is still blank and carried the same number. The phone has min number, I copied it to my moto g but the phone still does not show the network. Am I something wrong or writting wrong prl to it?? To get network you don't need min, you need PRL. To make calls after PRL , you need MIN. Sent from my XT1031 using Tapatalk 2 2 Share this post Link to post Share on other sites
bharat5143 0 Report post Posted September 29, 2014 Thanks Hitesh ji for your responce and making it clear, I will try to re programme it with DFS. can you please help me with correct PRL file so that i do not mess thing up again ? Share this post Link to post Share on other sites
