rawda 8 Report post Posted December 22, 2015 I found this guide some where, how to lg tribute stock. Use it your own risk 1. First grab the files you are gonna need. Download the: adb-setup.exe, CT_HsPhone_General_Drivers, Stockboot.img, StockRecovery.img, Recovery_bumped.img, ports.bat, Send_Command.exe 2. Install adb-setup.exe and CT_HsPhone_General_Drivers 3. Then you want to boot up into downloadmode. Vol + and plug in USB 4. Double click ports.bat (This will give us the COM port in which our device is connected we are looking for the Diag port) 5. Then open a command prompt run these commands it will put fastboot on your phone. Send_Command.exe \\.\COM4(replace COM4x with the correct COM#) dd if=/dev/zero of=/dev/block/platform/msm_sdcc.1/by-name/laf 6. Then once that is down pull battery then boot up into downloadmode again but this time it will be fastboot. 7. Once in fastboot run this command to put TWRP back onto the boot partition. fastboot boot recovery_bumped.img* 8. Once that is done pull the battery and let the phone boot into TWRP. 9. After that flash the FactoryBoot.img to the boot partition and the FactoryRecovery.img to the recovery partition. 10. Reboot and enjoy stock phone again. I have a softbricked tribute2 .. any solution? Share this post Link to post Share on other sites
sunilromy 62 Report post Posted December 22, 2015 I found this guide some where, how to lg tribute stock. Use it your own risk 1. First grab the files you are gonna need. Download the: adb-setup.exe, CT_HsPhone_General_Drivers, Stockboot.img, StockRecovery.img, Recovery_bumped.img, ports.bat, Send_Command.exe 2. Install adb-setup.exe and CT_HsPhone_General_Drivers 3. Then you want to boot up into downloadmode. Vol + and plug in USB 4. Double click ports.bat (This will give us the COM port in which our device is connected we are looking for the Diag port) 5. Then open a command prompt run these commands it will put fastboot on your phone. Send_Command.exe \\.\COM4(replace COM4x with the correct COM#) dd if=/dev/zero of=/dev/block/platform/msm_sdcc.1/by-name/laf 6. Then once that is down pull battery then boot up into downloadmode again but this time it will be fastboot. 7. Once in fastboot run this command to put TWRP back onto the boot partition. fastboot boot recovery_bumped.img* 8. Once that is done pull the battery and let the phone boot into TWRP. 9. After that flash the FactoryBoot.img to the boot partition and the FactoryRecovery.img to the recovery partition. 10. Reboot and enjoy stock phone again. I have a softbricked tribute2 .. any solution?From mulund ? show me Sent from my 0PJA2 using Tapatalk Share this post Link to post Share on other sites
sbaji52 8 Report post Posted December 22, 2015 I also have soft bricked tribute 2 after king root. Anyone have solution how to get back it unbrick. Sent from my SM-G360FY using Tapatalk Share this post Link to post Share on other sites
faizabul 0 Report post Posted January 3, 2016 1 of my friend had unknowingly updated a rooted LG tribute and from then onwards it reboots to recovery only. I had tried installing various roms via stock recovery but no development.Plz help masters!!! Share this post Link to post Share on other sites
Anand Mehta 15 Report post Posted February 12, 2016 LG tribute 2 ls665 hv new update zv4 of 277 mb for those who hv rooted and removed qcrilmessagetunnel.apk pls do not update your phone or it will softbricked and there is no stock firmware for lg tribute 2 ls665 Share this post Link to post Share on other sites
Anand Mehta 15 Report post Posted February 13, 2016 1 of my friend had unknowingly updated a rooted LG tribute and from then onwards it reboots to recovery only. I had tried installing various roms via stock recovery but no development.Plz help masters!!! i can fix lg tribute ls660 sprint/boost/virgin softbrick or stuck on lg logo after fix it will be completly on factory stock Share this post Link to post Share on other sites
waqyum 1 Report post Posted February 17, 2016 LG Realm how to get spc for free. How to enable DIAG mode without MSL code Install Shortcut Master Lite Run Shortcut Master Lite Select the top right corner menu shown marked red Now in submenu select search as shown marked red Type diag in search field shown marked in red, select search button shown marked yellow, Select Select Service Pragramu shown marked in green. Select launch shown marked in red Enable/Disable I think Everybody know to how to read spc once the phone is on Diag Enabled. Is there a way out to read spc code of LG Optimus F3 LS720? Shortcut master lite couldn't enable diag mode on F3. None of the SPC apps work. If some knows a way out please let me know. Thanks Share this post Link to post Share on other sites
ankurcshah 112 Report post Posted February 19, 2016 LG Realm how to get spc for free. How to enable DIAG mode without MSL code Install Shortcut Master Lite Run Shortcut Master Lite Select the top right corner menu shown marked red Now in submenu select search as shown marked red Type diag in search field shown marked in red, select search button shown marked yellow, Select Select Service Pragramu shown marked in green. Select launch shown marked in red Enable/Disable I think Everybody know to how to read spc once the phone is on Diag Enabled. Is there a way out to read spc code of LG Optimus F3 LS720? Shortcut master lite couldn't enable diag mode on F3. None of the SPC apps work. If some knows a way out please let me know. Thanks Try eBay.com and see. You'll get it. Share this post Link to post Share on other sites
Prakash Jeswani 0 Report post Posted February 19, 2016 I have lg g stylo ls 770 i updated through wifi on andriod 6 but after updating mobile data not working can some help me to get this downgrade to andriod 5.1.....please solve my issue Share this post Link to post Share on other sites
Guru Gopal 589 Report post Posted February 20, 2016 LG Realm how to get spc for free. How to enable DIAG mode without MSL code Install Shortcut Master Lite Run Shortcut Master Lite Select the top right corner menu shown marked red Now in submenu select search as shown marked red Type diag in search field shown marked in red, select search button shown marked yellow, Select Select Service Pragramu shown marked in green. Select launch shown marked in red Enable/Disable I think Everybody know to how to read spc once the phone is on Diag Enabled. Is there a way out to read spc code of LG Optimus F3 LS720? Shortcut master lite couldn't enable diag mode on F3. None of the SPC apps work. If some knows a way out please let me know. Thanks PM me meid i will try. But it is payment method. Share this post Link to post Share on other sites
Tauji 8 Report post Posted February 20, 2016 does LG tribute 2(US Version) support EVDO Rev. B in india? Share this post Link to post Share on other sites
shreesh 406 Report post Posted February 20, 2016 Nope Sent from my XT1526 using Tapatalk Share this post Link to post Share on other sites
ashishsethi 55 Report post Posted May 14, 2016 Any way the LG Tribute 2 LS665 can be unlocked for GSM use? Share this post Link to post Share on other sites
Guru Gopal 589 Report post Posted May 14, 2016 LG tribute 2 has no GSM radio at all. Not fit for Gsm Share this post Link to post Share on other sites