AT Commands For Samsung

[StaticElectricity 8]

Here are some AT Commands For Various Samsung Phones May Work On Reliance Samsung-N191.

I have not tested even one since I do not Have Samsung-N191

Just Compiled a list from various sources.

Most Of These Codes Work For Reliance LG-2030 Except For The Data Transfer Ones.

at+CAD=? +CAD:

at+CAD? +CAD: 1 [Analog=0, Digital=1]

at+CBC=? +CBC:

at+CBC? +CBC: 0,80 [battery Condition <Power Type>,%]

at+CDR=? +CDR: (0-1)

at+CDR? +CDR: 0

at+CDS=? +CDS: (0-0),(1-1),(512-65535),(6-250)

at+CDS? +CDS: 0,1,2048,6

at+CFC=? +CFC: (0-0)

at+CFC? +CFC: 0

at+CFG? +CFG: ""

at+CQD? +CQD: 10

at+CRC? +CRC: 0

at+CRM=? +CRM: (0-1)

at+CRM? +CRM: 0 [set RM Interface Protocol]

at+CSO=? +CSO: (12, 33)

at+CSO? +CSO: 33

at+CSQ=? +CSQ:

at+CSQ? +CSQ: 29, 99 [signal Quality <RSSI>, <BER> or <Quality Measure>,<Frame Error Rate>]

at+CSS=? +CSS:

at+CSS? +CSS: A, 17 [serving System Identification]

at+CTA=? +CTA: (0-255)

at+CTA? +CTA: 0 [MT-Terminated Async. Data Calls]

at+CXT=? +CXT: (0-1)

at+CXT? +CXT: 0 [Cellular Extension]

at+CBIP=? +CBIP:

at+CBIP? OK

at+CDVW=? and at+CDVW? through at+CEGK=? and at+CEGK? return a "BUSY" response.

at+CDVW? OK

at+CMIP=? +CMIP:

at+CMIP? OK

at+CMUX=? +CMUX: (1, 2, 3, 4, 5, 6, 7, 8, 9, A, B, C, D, F),(1, 2)

at+CMUX? +CMUX: C,2

at+ESR? +ESR: 1 [selective Repeat]

at+GCAP=? +GCAP:

at+GCAP +GCAP: +CIS707-A, +MS, +ES, +DS, +FCLASS

at+GMI=? +GMI: [Request Manufacturer Identification]

at+GMI +GMI: SAMSUNG ELECTRONICS CO.,LTD.

at+GMM=? +GMM: [Request Model Identification]

at+GMM +GMM: SCH-A310

at+GMR=? +GMR: [Request Revision Identification]

at+GMR +GMR: S/W VER: ND2.1.75 SCH-A310

at+GOI=? +GOI: [Request Global Object Identification]

at+GSN=? +GSN: [Request Product Serial Number Identification]

at+ICF=? +ICF: (3-3),(0-3) [Framing <Supported format values>,<Supported parity values>]

at+ICF? +ICF: 3,3 [DTE-DCE Character Framing <Format>,<Parity>]

at+IFC=? +IFC: (0-3),(0-2) [Flow control <Supported DCE_by_DTE values>,<Supported DTE_by_DCE values>]

at+IFC? +IFC: 2,2 [DTE-DCE Local Flow Control <DCE_by_DTE>,<DTE_by+DCE>]

at+IPR=? +IPR: (0, 1200, 2400, 4800, 9600, 19200), (45, 50, 75, 110, 150, 300, 600, 38400, 57600, 115200, 230400) [DTE rates <possible autodetect rates>,<possible fixed-only rates>]

at+IPR? +IPR: 230400 [Fixed DTE Rate 0=autodetect]

at+MIN=? +MIN:

at+MIN? +MIN: NNN-NNN-NNNN [Your Phone Number]

Battery Condition Power Type: 0=Battery, 1=Charging, 2=N/A, 3=Power Failure

Signal Quality RSSI: Values from 0 - 31

Signal Quality Frame Error Rate: 0 = Less than 0.01%

1 = 0.01% to 0.1%

2 = 0.1% to 0.5%

3 = 0.5% to 1.0%

4 = 1.0% to 2.0%

5 = 2.0% to 4.0%

6 = 4.0% to 8.0%

7 = Greater than 8.0%

Cellular Extension: 0 = do not pass unrecognized commands to IWF

1 = pass unrecognized commands to IWF

RM Interface Protocol: 0 = Use Circuit Switched Data

1 = Use Packet Switched Data

Phone Capabilities: CIS707-A = CDMA Circuit Switched Data

MS = Modulation Selection (IWF)

ES = Error Control Selection (IWF v.42)

DS = Data Compression Selection (IWF v.42bis)

FCLASS = Group III Fax

CIS707P = CDMA Packet Switched Data

AT#PXXXX=? shows entry format

AT#PXXXX? shows current setting

AT#PXXXX=<data> writes data

and maybe...

AT#PXXXR=N reads data from location N

AT#PXXXW=<data> writes data

at#PBDYN?

#PBDYN: NNN-NNN-NNNN [Your Phone Number]

at#PBGRR=?

#PBGRR: (0-4),12 [Read the name of group 0-4, 12 characters long]

at#PBGRW=?

#PBGRW: (0-4),12 [Write the name of group 0-4, 12 characters long]

at#PBMNR=?

at#PBMNW=?

at#PBOKR=?

#PBOKR: (1-500),(0-4),12,32,48,0 [Format of phone book read - inaccurate]

at#PBOKW=?

#PBOKW: (1-500),(0-4),12,32,32,0 [Format of phone book write - inaccurate]

at#PBSEL?

#PBSEL: 0,25,"1C2C3C4C5C6C7C8C9C10C11C12C13C14C15C16C17C18C19C20C21C22C23C24C25C"

at#PCBIT?

#PCBIT: 1005,1,0,8,5,500,500,31,1,13,48,12,32,0

at#PCBND?

#PCBND: 1

at#PCKEY?

#PCKEY: 0

at#PCLNK?

#PCLNK: 0

at#PCLNK=?

#PCLNK: (0-1)

at#PCMIT?

#PCMIT: 1000,1,4,0,0,0,0,0,3,12,1,128,80,10,12,1,0,0,0,0,12,0,0,0,0,0

at#PCOUT?

#PCOUT: 1

at#PCOUT=?

#PCOUT: (0-1)

at#PCPIT?

#PCPIT: 1002,32,20,1,5,16,20,32,20

at#PCSIT?

#PCSIT: 1002,32,10,160,30,160,30,160,20,22528,80

at#PCUIT?

#PCUIT: 1002,12,4096,0,5,0

at#PIDYR=?

#PIDYR: (0-19),16

at#PIDYW=?

#PIDYW: (0-19),16

at#PIMMR=?

#PIMMR: (0-9),60

at#PIMMW=?

#PIMMW: (0-9),60

at#PISHR=? [Read Calendar Item]

#PISHR: (0-19),(0-4),32

100

0

10

30

60

at#PISHW=? [Write Calendar Item]

#PISHW: (0-19),(0-4),32

100

0

10

30

60

at#PITDR=? [Read Note Pad Item]

#PITDR: (0-19),32

at#PITDW=? [Write Note Pad Item]

#PITDW: (0-19),32

at#PIWTM?

#PIWTM: 19800106T000000

19800106T000010

19800106T000020

19800106T000030

19800106T000040

19800106T000050

19800106T000100

19800106T000110

19800106T000120

19800106T000130

19800106T000140

19800106T000150

19800106T000200

19800106T000210

19800106T000220

19800106T000230

19800106T000240

19800106T000250

19800106T000300

19800106T000310

19800106T000320

19800106T000330

19800106T000340

19800106T000350

at#PIWTM=?

#PIWTM: (0-23),16

San Francisco

Denver,Arizona

Chicago,Mexico

NewYork,D.C.

Caracas

Buenos Aires

Mid Atlantic

Cape Verde

London,Madrid

Paris,Berlin

Athens,Helsinki

Moscow

Abu Dabi

Tashkent

Alma-ata

Bangkok,Jakarta

Hongkong,Beijing

Seoul,Tokyo

Guam,Sydney

Okhotsk

Wellington

Samoa,Midway

Honolulu,Hawaii

Alaska

at#PMGLG?

#PMGLG: (0-14)

0,Golf

0,Elf

1,Elf

1,Space

2,Flower

2,Snow

2,Leopard

2,Elf

2,Clock1

2,Clock2

2,Dual clock

30,Down image1

31,Down image2

32,Down image3

33,Down image4

at#PMGLG=?

#PMGLG: (0-2)

Opening

Closing

Wall Paper

at#PMIDL? [DL? Download something?]

#PMIDL: 1,"Y"

at#PMIDL=?

#PMIDL: (1-10),(0-2),(0-1),12,40960,128,80

at#PMIUL=? [uL? Upload something?]

#PMIUL: (1-10),(0-2),(0-1),12,40960,128,80

at#PMLGT?

at#PMODE? [Must be in PMODE=1 to recieve commands.]

#PMODE: 1

at#PMODE=?

#PMODE: (0-1)

at#PMUNA?

#PMUNA: 20021107T205540,S," [Phone banner text and date it was recorded.]

at#PMUNA=?

#PMUNA: 30,1

at#PSFMR?

OK

at#PSFMR=?

#PSFMR: (0-19)

at#PSRMR?

OK

at#PSRMR=? [Read Text message]

#PSRMR: (0-29)

at#PSSEL?

#PSSEL: 10,1,0

at#PSSMR?

OK

at#PSSMR=?

#PSSMR: (0-29)

at#PSSMW?

#PSSMW: 80

at#PSSMW=?

#PSSMW: (0-29)

at#PSSTC?

#PSSTC: 10

at#PSSTC=?

#PSSTC: (0-10)

at#PSSTR?

#PSSTR: 10

at#PSSTR=?

#PSSTR: (0-10)

at#PSSTW?

#PSSTW: 10

at#PSSTW=?

#PSSTW: (0-10)

at#PSTRM?

#PSTRM: 4

at#PSTRM=?

#PSTRM: (0-1)

at#PSTTC?

#PSTTC: 1,441

at#PSTTC=?

#PSTTC: (0-80),22528

at#PUGSN?

#PUGSN: (0-26)

0,255,Inactive

1,0,Bell 1

2,0,Bell 2

3,0,Bell 3

4,0,Bell 4

5,0,Bell 5

6,1,Melody 1

7,1,Melody 2

8,1,Melody 3

9,1,Melody 4

10,1,Melody 5

11,1,Melody 6

12,1,Melody 7

13,1,Melody 8

14,1,Melody 9

15,1,Melody 10

16,1,Melody 11

17,1,Melody 12

18,1,Melody 13

19,1,Melody 14

20,1,Melody 15

21,1,Melody 16

22,2,Inactivo

23,2,Timbre 1

24,2,Timbre 2

25,2,Timbre 3

26,2,Timbre 4

at#PUMDL=? [DL? Another Download? No matching upload...]

#PUMDL: 12,4096

at#PUMRD=?

[niket 0]

Many many Thanx. buddy

[StaticElectricity 8]

hey niket...

please post weather all worked...

how u liked it etc...

since i cant test

[niket 0]

hey niket...

please post weather all worked...

how u liked it etc...

since i cant test

All AT+______ command does but AT#_________ didn't

[StaticElectricity 8]

well, then it seems that samsung supports data only over brew!!

[niket 0]

well, then it seems that samsung supports data only over brew!!

It may be true, because all your code for RD2030 works on my phone expect one.

Following code always instantly turn off my phone.

AT$QCDMG

When i used Bitpim on my phone. same happens when i start to browse file system in bitpim (i.e phone turn off instantly)

Today I downloaded CVS Source of Bitpim. hope that i will find out way to make my phone work of Bitpim.

Here all LG phone users change their ringtones, wallpaper, pc sync but poor guy like me can't do that...

[StaticElectricity 8]

i'll check and see what i can do... but at$qcdmg is used to bring the phone into BREW mode.. and here u say that it turns ur phone off... so there must be another command for bringing it into BREW mode...

[shailk_jain 0]

Hi all

i am trying to find the command to send sms.

i am using Samsung SCH N191 mobile. I have also LG 2030.

on both of the mobile the command "at+cmgs" returns error..

i dont know the command to send sms..

thanx for any kind of help..

[sun_capri 0]

hey how all these work

CAN ANYBODY pl help me

[Ashokjp 15]

Connect to the port to which your handset is connected...

You can do that using Hypertimnal which comes along with your windows..

You can find that in Start > Programs > Accessories > Communication

After getting the program connected to your phone, type in these commands..

[StaticElectricity 8]

hey guys it seems... that at#pmode=1 will set the samsung phone in BREW mode... and then maybe it can be used normally with bitpim!!!

[niket 0]

hey guys it seems... that at#pmode=1 will set the samsung phone in BREW mode... and then maybe it can be used normally with bitpim!!!

wow gr8 ...

pls make samsung to work with Bitpim sooooon.. needed badly.. u know

[Ashokjp 15]

Hey niket,

you got samsung na..

Try entering the command (at#pmode=1) given by static using Hyperterminal connected to your phone..

Then if it returns OK, open Bitpim and try accessing the file structure

[niket 0]

Not works..

at#pmode=1 returns error. this code doesn't exist for N191. because at#pmode? and at#pmode=? also not works.

[niket 0]

BitPim shows following log on my phone...

17:59:21.421 COM3: Opening port COM3, 115200 baud, timeout 3.000000, hardwareflow 0, softwareflow 0

17:59:21.441 COM3: Open of comm port suceeded

17:59:21.451 Other CDMA Phone: Listing dir ''

17:59:24.476 COM3: Timed out waiting for 7e, requested bytes 1 - 0 bytes read

17:59:24.496 COM3: Changed port speed to 38400

17:59:28.002 COM3: Timed out waiting for 7e, requested bytes 1 - 0 bytes read

17:59:28.022 COM3: Changed port speed to 115200

17:59:31.526 COM3: Timed out waiting for 7e, requested bytes 1 - 0 bytes read

17:59:31.546 COM3: Changed port speed to 115200

17:59:32.217 Other CDMA Phone: No response to setting QCDMG mode

17:59:32.247 COM3: Port speed 19200 not supported

17:59:32.247 COM3: Port speed 230400 not supported

17:59:32.247 Error: Device needs attention - Other CDMA Phone on COM3

Other CDMA Phone on COM3: The phone is not responding while transitioning mode from none to brew.

See the help for troubleshooting tips

static u have any ans..!

[StaticElectricity 8]

well, according to the log u've posted... it seems that Samsung Phone Dosen't Support AT$qcdmg command and is not responding...

sorry buddy but i cant say any thing on this ...

the only prob is that i dont have a samsung phone so i cant do anything firsthand.....

it's very difficult to know tech stuff about things w/o doing expts. firsthand....

[niket 0]

sorry buddy but i cant say any thing on this ...

the only prob is that i dont have a samsung phone so i cant do anything firsthand.....

it's very difficult to know tech stuff about things w/o doing expts. firsthand....

Ok but whenever u able to get samsung try on this.