vabs 81 Report post Posted April 18, 2015 (edited) hi friends need help, yesterday morning my wife's Lenovo s820 mobile went down , all of sudden went to boot loop and now stuck up at lenovo logo at start now i have already tried hard reset its not working, it goes in to meta mode and factory moe but thats it nothing happens later when i tried going into recovery mode it shows "no command", look like all is wiped out, but strange part when i connected to pc today lenovo suite started getting install is there any hoipe for data or app i already dl usb drivers sp flash tool but now looking for stock rom lenovo s820 8gb indian model could not find any where and secondly how can normal running phone come to this stage with out doing anything (last she spoke with me then after 30 min when she was back it was in this state before giving it to lenovo service center i would like to load stock rom onto it any pointers will be very helpful Thanks in advance Vaibhav Edited April 18, 2015 by vabs Share this post Link to post Share on other sites
::: VA ::: 531 Report post Posted April 18, 2015 vaibhav bhai, you are missing something here when you use volume key+power key to get to recovery it shows no command at this point you have to press either of the voume keys again(or maybe it was the power key , cant remember right now) to get into recovery, where you can do factory reset its a two step process to reach there. i have tried this on lenovo s920 & p780 both first reach the no command page. Share this post Link to post Share on other sites
dave123 7 Report post Posted April 18, 2015 If just pressing the volume key does not help,try pressing power Button and both volume keys together. Means all three pressed. And then release the power key while still holding on to volume buttons. As soon as u release the power button u may find yourself in recovery Share this post Link to post Share on other sites
vabs 81 Report post Posted April 18, 2015 Babaji, yes u were right after pressing power key it got into recovery.. Yes Dave thanks a lot but needed some try Now friends already in recovery wiped catche and kept it for factory reset ... Don't know how much time it will take already 1 hr pass Removed both sim and SD card before doing all this. Thanks a lot babaji n Dave Share this post Link to post Share on other sites
vabs 81 Report post Posted April 18, 2015 Update : managed to factory reset it but still stuck up at lenovo logo at start, no animation or any activity.. looked like bricked phone. now searching for India specific stock ROM for 8GB model .. strangely its not easily available. any pointers would help Share this post Link to post Share on other sites
::: VA ::: 531 Report post Posted April 19, 2015 Why don't you try need ROM? They have official and custom ROMs for this phone. For e.g. http://www.needrom.com/download/lenovo-s820-vibeui-2-0/ Share this post Link to post Share on other sites
vabs 81 Report post Posted April 19, 2015 Babaji .. Yes DL exactly same rom last nite .. Now will try today and will update here.. Hope all goes smooth. But question remains . how can perfectly running phone end up in this situation?? Share this post Link to post Share on other sites
vabs 81 Report post Posted April 19, 2015 Stuck at this? Any suggestions?? Trying other ROM as of now Sent from my MI 3W using Tapatalk Share this post Link to post Share on other sites
vabs 81 Report post Posted April 19, 2015 May be i need the exact ROM S820_ROW_8G_S221_140730 ? but still could not find it .. am i doing something wrong here Share this post Link to post Share on other sites
Notam 43 Report post Posted April 19, 2015 U can try this link. Not sure it will solve your problem but give it a try https://drive.google.com/uc?id=0B45LKW_C9CrpaWxoemVnNDhVeGM&export=download 1 Share this post Link to post Share on other sites
::: VA ::: 531 Report post Posted April 19, 2015 This page seems to have the ROM you asked but requires registration to download. Give it a shot http://www.symbianize.com/showthread.php?t=1093206 Share this post Link to post Share on other sites
vabs 81 Report post Posted April 19, 2015 (edited) Thanks a Lot SK, will update here once it get downloaded Babaji : do you understand that verifcation question on register page, its not english, i am not getting register due to those .. Let me try SK's solution first Edited April 19, 2015 by vabs Share this post Link to post Share on other sites
vabs 81 Report post Posted April 20, 2015 (edited) SK your ROM and flash tool are perfect but i am getting problem with MTK preloader Com USB drivers tried many solutions including xda methods to install it but nothing is getting work out .. may be i am missing some steps./ or doing wrong or something with my system (feeling stupid) - cleard all USB and driver entry with USBDview, also cleaned the registry - then once it showed but gones in seconds before i can run the flash tool - then back to same route cleaning and reinstalling drivers .. but still no luck will try today one more time then give up and head over to service station tried on vista and win8.1 same issue happening over and over thanks guys for all help .. weekend was spend on this without any luck . Vaibhav Update :i find the workaround u need to start flash tool press download then connect phone then atleast its get ecognized error : "PMT Changed need to DL new ROM" ... Now What is This as per my research going on net it looks like some issue with scatter file but now back to square one where i will it Edited April 20, 2015 by vabs Share this post Link to post Share on other sites
Notam 43 Report post Posted April 20, 2015 Try This flashing tool http://www.4shared.com/zip/QT4zOqiace/SP_Flash_Tool_v5135201.html U may need these also USB Vcom Driver http://www.4shared.com/zip/mKGyo0b9ba/USB_VCOM_Driver.html First thing to do is install USB Vcom driver on your computer, without this driver installed on your computer flash tool will not recognize your device and progress bar will stay at 0%, for installing USB Vcom driver please refer to this below : turn off your device and remove the battery, If you device using non removable make sure that your device is completely turn off wait like 20 seconds after power off the device open device manager on your computer connect your device using USB cable there will be MTK65xx Preloader Devices show on your device manager, PORT section for 5 second or less and then disappear disconnect and connect your device again, right click on MTK65xx Preloader Devices before it disappear, select Update Driver Software point it USB VCOM extracted folder, and install the driver from there. disconnect and connect your device again, there will be Mediatek PreLoader USB VCOM Port on your device manager PORT section. After successful install USB Vcom driver now we can start the step to update Lenovo S920, for step by step for update please refer to below : Extract ROM downloaded and the flash tool on then same folder, for easy organize it and flashing it. Go to flash tool extracted folder and run flash_tool.exe. If you are using windows 7 or later please run it using administrator privilege. On the flash tool, please go to Options ↦ Option ↦ Download please make sure DA DL All with Checksum already checked, click X (Close) to back to Flash Tool, this option is very important so please don't forget it. Once back to flash tool, now please click on the Scatter-Loading button and point it to ROM extracted folder and the select MT6589_Android_scatter_emmc.txt this will automatically loaded all required images file to update your device, Please wait until flash tool finish processing the image files and become stand by. Change Download option from Download Only to Firmware Upgrade mode, now you can press Download button or hit CTRL+D. Flash tool will initialize the files that add to the flash tool and when finish flash tool will ready to make connection with your device. When flash tool already finish and stand by, now please turn off your device and remove the battery. Connect your device to computer using USB cable, flash tool will immediately recognize your device and begin to start flashing process, this process will take 5-6 minutes to finish and when you see GREEN CIRCLE in the middle of flash tool that mean flashing process already finish Done, you have successful update your Lenovo S820 with firmware version , please confirm it with go to System Setting ↦ About Phone and look at the Build Number it must be same with the downloaded ROM. 3 Share this post Link to post Share on other sites
vabs 81 Report post Posted April 20, 2015 Except second last step of DL to firmware upgrade I have been doing same for whole day .. Let me try this and update you here BTW thanks a lot for such detailed post. Wow.. Respect sir Sent from my MI 3W using Tapatalk Share this post Link to post Share on other sites
Notam 43 Report post Posted April 20, 2015 Or try this one This contains all required files to flashing your device to S124 version for Lenovo S820 8GB. This files can be install using SP Flash Tool http://lenovo-forums.ru/Files/OS/S820/S820_ROW_8G_S124_140404.rar 2 Share this post Link to post Share on other sites
vabs 81 Report post Posted April 20, 2015 Sir, here is the error if i select firmware upgrade Share this post Link to post Share on other sites
Notam 43 Report post Posted April 20, 2015 Try Download option instead of firmware update Share this post Link to post Share on other sites
vabs 81 Report post Posted April 20, 2015 (edited) this is the error for download only Edit it never went ahead of red completion bar what you feel is the issue ? Edited April 20, 2015 by vabs Share this post Link to post Share on other sites
vabs 81 Report post Posted April 20, 2015 SK sir thanks alot for that Rom Link it worked .. thanks a lot friends will update if any error found Share this post Link to post Share on other sites
vabs 81 Report post Posted April 23, 2015 Or try this one This contains all required files to flashing your device to S124 version for Lenovo S820 8GB. This files can be install using SP Flash Tool http://lenovo-forums.ru/Files/OS/S820/S820_ROW_8G_S124_140404.rar this is the ROM solve my issue, thanks a lot SK sir, after flashing this version i just updated the gapps then let the lenovo go thru system update then it done bog update of 721 MB of S221 (kitkat) still no sw install except gapps again there was 220 MB & 8.12 MB system updates only after system updates are complete i have installed required software done all required regular setting disabling which ever sw was not necessary at startup now its working perfectly fine... even famous restart bug is also sorted out i think. thanks a lot SK sir 1 Share this post Link to post Share on other sites
Notam 43 Report post Posted April 23, 2015 Firstly don't say "Sir" to me. I am just learner myself. Secondly we all are here to help each other with whatever little knowledge n resources we have. I am just happy to see that u go your phone back in working state by yourself. You did it all by yourself n i know it gives a lot satisfaction n pride also. 4 Share this post Link to post Share on other sites