Samsung Note 4 Sprint N910P GSM/CDMA Unlocking

[ssr 10]

can u plz provide link to the custom rom which u are using?

[Guru Gopal 589]

can u plz provide link to the custom rom which u are using?

what is the os and what is model number of the phone? I will provide link for custom rom

[phonegeek 588]

http://forum.xda-developers.com/note-4-sprint/development/rom-t2956667

Sprint_Hybrid_N910PVPU4COG5_Deodexed

[ssr 10]

Thanks, I have already installed same in my sprint note 4, for cdma sim to work do I have to unlock the sim?

galaxy tools does not install on 5.1.1

tried to downgrade to N910PVPU1ANIE_N910PSPT1ANIE_N910PVPU1ANIE_HOM but failed in odin

Edited November 14, 2015 by ssr

[phonegeek 588]

Cdma works normally.

Sent from my SM-N910P using Tapatalk

[ssr 10]

so is it prob with my sim card?

let me check using one sim

Edited November 14, 2015 by ssr

[phonegeek 588]

I am not very much sure about cdma as I am using it for gsm but have you changed the network settings to lte/cdma?

Sent from my SM-N910P using Tapatalk

[ssr 10]

yes, tried with lte/cdma, cdma and also automatic.

do I have to do any changes with ##data#? for that I need to find MSL

tried with oneworld sim and it said sim error.

used a working sim from my LG G2 to note4, network mode to LTE/CDMA no signal, it shows "x" on signal bar.

btw how did u got rid of "checking device status". I could not find Samsung service to disable as mentioned in other blogs.

now planning to downgrade to N910PVPU1BOB7_N910PSPT1BOB7_SPR

Edited November 14, 2015 by ssr

[ssr 10]

used cm remix ROM and in settings its set to nv mode and not changing to RUIM mode

btw, i am not able to use dfs and workshop on my note, they donot pull any data

and device info in dfs shows operator as reliance.

and also imei number is empty

Edited November 15, 2015 by ssr

[phonegeek 588]

My suggestion, go complete stock first by flashing the stock tar file using odin, preferably bob7 as you mentioned earlier. After that, use galaxy tool, it should work as I heard that they have updated it to be used with lollipop. Please always take your efs backup before tinkering anything with your phone.

Sent from my SM-N910P using Tapatalk

[Guru Gopal 589]

used cm remix ROM and in settings its set to nv mode and not changing to RUIM mode

btw, i am not able to use dfs and workshop on my note, they donot pull any data

and device info in dfs shows operator as reliance.

and also imei number is empty

you have to root the phone, use idoneapps site for getting GSM unlocked and getting SPC get rid off HFA etc. http://idoneapps.com/index.php?os=android You can order directly or want some concession use my account. (pm for details) Though old galaxy tools works on 5.1.1, still i am using official way to honour the hardwork of Idone. You have to change Ruim pref to get your CDMA sim worked and change other parameters as earlier.

Edited November 16, 2015 by Guru Gopal

[ssr 10]

thanks, I downgraded to bob7 and then able to use galaxy tools, got spc.

only prob now is I wast able to change r-uim mode from nv to ruim.

tried both workshop and dfs.

in workshop when i click write error is "phone ask for spc. spc 6 digits is required"

Edited November 15, 2015 by ssr

[phonegeek 588]

^ So all issues resolved?

[ssr 10]

in workshop when i click write error is "phone ask for spc. spc 6 digits is required", did my EFS got corrupted?

[phonegeek 588]

So when you first input SPC, does it accepts it?

You can look into the DFS log.

[ssr 10]

So when you first input SPC, does it accepts it?

You can look into the DFS log.

ys, I accepts spc and unlocks both in dfs and workshop.

in DFS log screen does not show writting for ruim and only shows while reading

[18:25:08] SAMSUNG Mobile USB Serial Port (COM7) device in daignostic mode

[18:25:19] SPC Unlocked

[18:25:47] Read NV Items Range Operation Started.Please wait until completed...

[18:25:48] Read NV Item (BD_ADDR) VARIABLE_WAS_NOT_ACTIVE

[18:25:48] Read NV Item (RTRE_CONFIG) OK

[18:25:48] Read NV Item (HDRAMP_HARDWARE_ID) VARIABLE_WAS_NOT_ACTIVE

[18:25:48] Read NV Item (HIGH_SPEED_USB_CURRENT_COMPOSITION) VARIABLE_WAS_NOT_ACTIVE

[18:25:48] Read NV Item (WLAN_MAC_ADDRESS) VARIABLE_WAS_NOT_ACTIVE

[18:25:48] Read NV Items Range Operation Completed

[18:26:54] Switching OfflineD OK

[18:26:54] Write NV Items Range Operation Started.Please wait until completed...

[18:26:54] Write NV Item (BD_ADDR) Skipped

[18:26:54] Write NV Item (HDRAMP_HARDWARE_ID) Skipped

[18:26:54] Write NV Item (HIGH_SPEED_USB_CURRENT_COMPOSITION) Skipped

[18:26:54] Write NV Item (WLAN_MAC_ADDRESS) Skipped

[18:26:54] Write NV Items Range Operation Completed

or do i need to send 16 digit password also?

Edited November 15, 2015 by ssr

[ssr 10]

If I try to read SPC I get

[18:33:20] Read NV Item (SEC_CODE) BAD_SPC_MODE

[phonegeek 588]

You need 16 digit pass

[ssr 10]

Yes, Also tried with pass, no use. will try something else

no problem in reading, but writing RTRE_CONFIG does not show. and if I press write 2nd time, dfs crashes

yesterday, after few tries It did write ruim setting. but there was no entry for RTRE_CONFIG in log. restarted dfs and read config data confirmed the write.

was able get the signal and data in stock.

Thanks for the help Saurabh

Edited November 16, 2015 by ssr

[ssr 10]

used cm remix ROM and in settings its set to nv mode and not changing to RUIM mode

btw, i am not able to use dfs and workshop on my note, they donot pull any data

and device info in dfs shows operator as reliance.

and also imei number is empty

you have to root the phone, use idoneapps site for getting GSM unlocked and getting SPC get rid off HFA etc. http://idoneapps.com/index.php?os=android You can order directly or want some concession use my account. (pm for details) Though old galaxy tools works on 5.1.1, still i am using official way to honour the handwork of Idone. You have to change Ruim pref to get your CDMA sim worked and change other parameters as earlier.

Thanks, my mobile was already unlocked by the original owner, idone app confirmed that.

[ssr 10]

Current using Sprint_Hybrid_N910PVPU4COG5_Deodexed, not receiving SMS from some sources (i checked online sms), anything particular I have to do?

I did not upload reliance PRL file in workshop, only changed ruim settings to ruim prefered.

Both voice and data working fine

Edited November 18, 2015 by ssr

[phonegeek 588]

Which series sim are you using?

Sent from my SM-N910P using Tapatalk

[ssr 10]

Which series sim are you using?

Sent from my SM-N910P using Tapatalk

I could not understand your question, can u plz tell me where to check that?

[ev1lb0ygen1us 27]

Which series sim are you using?

Sent from my SM-N910P using Tapatalk

I could not understand your question, can u plz tell me where to check that?

You need RGE sim to get everything working on Sprint Note 4.

Which was your handset before Note 4? You are probably using REC sim, since you are not getting SMS. Contact your local RWW and confirm your sim first and ask them if they have RGE sim in stock. You may have to buy the RGE SIM online.

Edited November 18, 2015 by ev1lb0ygen1us

[ssr 10]

You need RGE sim to get everything working on Sprint Note 4.

Which was your handset before Note 4? You are probably using REC sim, since you are not getting SMS. Contact your local RWW and confirm your sim first and ask them if they have RGE sim in stock. You may have to buy the RGE SIM online.

I was using G2 before this, I have also got One world sim(RECRU series) which I have not yet activated.

btw, how to check if my sim is RGE?

Edited November 18, 2015 by ssr