Nokia Cdma Mobiles Stuff

[Vishal Gupta 4]

Guys!

Here I'm posting some interesting secrets & codes for Nokia CDMA mobiles.

Don't know whether these work on other Nokia sets or not.

So pls try them!

Field test (Net Monitor) activation

-------------------------

To activate Net Monitor menu

type *3001#12345#

scroll to Field Test

enable (it says something about switching your phone off)

exit menus

turn off

switch on

menu

Net Monitor

Enter display/group code (eg 3101 for link info or 6101 battery info)

ok

scroll to page desired with up-down

hold down * to toggle between description and data

to get your normal screen back you can type in the display/group code 0000

page 31-01

-RXX Rx signal strength, probably in dBW but maybe in dBm

-TXX Tx signal strength

PPN is something about the tower's ID number I think

FER frame error rate

page 31-02

IDLHO could be about the Idle hand over. maybe signal strength or minimum time spent on 1 tower before it is handed over to another tower

page 31-08

BaseID just thought you'd like to know what page this was on

page 32-02

mux is often short for multiplex

page 61-01

Mon monitor battery charging program state

(cha=charging Rst=reset mon=maybe monitoring external power

sockets to see when power is inserted mai=mains supply)

Volt battery voltage in milliVolts

Temp battery temp in tenths of a degree Celcius ie 301 is 30.1degrees

ChMo Charge Mode (not=not, LiC=LiIon charging, Dco=disconnected)

page 61-08

PWM pulse width moulator (0-255) the position in the count to 255

where the power supply switches from on to off. it switches back

to on when it cycles from 255 back to 0

page 68-01

BER bit error rate

page 68-02

CRC cyclic redundancy check

*#363# - Searches for network.

*#639# (*#new#) is a shortcut to program a new number into the telephone.

*#725# - Clears resent channel list.

*#74# - Displays current Sys ID.

*#762# or *#769# - Display goes back to wallpaper.

*#763# - Displays Calling ID.

*#837# lets you check your PRL and software version.

*#7780# Will restore factory settings.

*#7370# - Full factory reset. Resets all settings including non-user changeable items (like SPC). (Use this code at ur own risk!)

*#6767# - Used for setting mo-sms on/off.

*#75681# - Restarts phone, Restarts slot cycle.

*#0000# - Displays software version.