Strange Problem Connecting With Local Cable

[deepakm 0]

I have purchased a local cable for LG RD2030 and installed the drivers but am notbeing able to connect to R-Connect using dialup.

What I am able to do:

With hyperterminal, the command at+cta=30 gives OK and ATDT#777 gives CONNECT. Using hyperterminal,

If I give ATDT#anyotthernumber the phone tries to dials the given number. However using the reliance dialler or using a new connection does not show any activity.

Modem logs at the end of the mail after using the dialer

My assumptions:

The cable seems to be okay since I can communicate with the phone and the phone attempts to dial with hyperterminal. I assume thatthe CONNECT from hyperterminal shows that a connection is setup. Any clues on why the dialer is not working and what I need to do to setup a PPP connnection ??

Thanks

Deepak

05-30-2005 20:38:00.162 - File: C:\WINDOWS\System32\tapisrv.dll, Version 5.1.2600

05-30-2005 20:38:00.162 - File: C:\WINDOWS\System32\unimdm.tsp, Version 5.1.2600

05-30-2005 20:38:00.162 - File: C:\WINDOWS\System32\unimdmat.dll, Version 5.1.2600

05-30-2005 20:38:00.162 - File: C:\WINDOWS\System32\uniplat.dll, Version 5.1.2600

05-30-2005 20:38:00.162 - File: C:\WINDOWS\System32\drivers\modem.sys, Version 5.1.2600

05-30-2005 20:38:00.172 - File: C:\WINDOWS\System32\modemui.dll, Version 5.1.2600

05-30-2005 20:38:00.172 - File: C:\WINDOWS\System32\mdminst.dll, Version 5.1.2600

05-30-2005 20:38:00.172 - Modem type: LG USB MODEM

05-30-2005 20:38:00.172 - Modem inf path: oem23.inf

05-30-2005 20:38:00.172 - Modem inf section: Gen2300

05-30-2005 20:38:00.172 - Matching hardware ID: mdmgenlg

05-30-2005 20:38:00.252 - Opening Modem

05-30-2005 20:38:00.252 - 115200,8,N,1, ctsfl=1, rtsctl=2

05-30-2005 20:38:00.262 - Initializing modem.

05-30-2005 20:38:00.262 - DSR is low while initializing the modem. Verify modem is turned on.

05-30-2005 20:38:00.262 - CTS is low while initializing modem.

05-30-2005 20:38:00.272 - Send: AT<cr>

05-30-2005 20:38:00.292 - TSP(0000): Monitoring

05-30-2005 20:38:02.275 - Timed out waiting for response from modem

05-30-2005 20:38:02.275 - The modem failed to respond to the initialization command, Retrying one more time

05-30-2005 20:38:02.275 - 115200,8,N,1, ctsfl=1, rtsctl=2

05-30-2005 20:38:02.285 - DSR is low while initializing the modem. Verify modem is turned on.

05-30-2005 20:38:02.285 - CTS is low while initializing modem.

05-30-2005 20:38:02.285 - Recv: AT<cr>

05-30-2005 20:38:02.285 - Command Echo

05-30-2005 20:38:02.285 - Recv: <cr><lf>OK<cr><lf>

05-30-2005 20:38:02.285 - Interpreted response: OK

05-30-2005 20:38:02.295 - Send: AT<cr>

05-30-2005 20:38:04.298 - Timed out waiting for response from modem

05-30-2005 20:38:04.298 - The modem failed to respond to the initialization command, Retrying one more time

05-30-2005 20:38:04.298 - 115200,8,N,1, ctsfl=1, rtsctl=2

05-30-2005 20:38:04.308 - DSR is low while initializing the modem. Verify modem is turned on.

05-30-2005 20:38:04.308 - CTS is low while initializing modem.

05-30-2005 20:38:04.308 - Recv: AT<cr>

05-30-2005 20:38:04.308 - Command Echo

05-30-2005 20:38:04.308 - Recv: <cr><lf>OK<cr><lf>

05-30-2005 20:38:04.308 - Interpreted response: OK

05-30-2005 20:38:04.318 - Send: AT<cr>

05-30-2005 20:38:06.321 - Timed out waiting for response from modem

05-30-2005 20:38:06.321 - Session Statistics:

05-30-2005 20:38:06.321 - Reads : 18 bytes

05-30-2005 20:38:06.321 - Writes: 9 bytes

[rEdshiFt 1]

DSR is low while initializing the modem. Verify modem is turned on.

          CTS is low while initializing modem.

this is the key part i think...

errm.... actualy i dont know WHAT is wrong with ur setup... but those are the key messages... maybe cable.

wait for a lil more, im sure u'll get a better answer

[deepakm 0]

DSR is low while initializing the modem. Verify modem is turned on.

          CTS is low while initializing modem.

this is the key part i think...

errm.... actualy i dont know WHAT is wrong with ur setup... but those are the key messages... maybe cable.

wait for a lil more, im sure u'll get a better answer

32942[/snapback]

I think it is the cable but cant understand why hyperterminal communication works. Maybe the trick is to ignore all error messages :-)

[Pankaj Verma 0]

DSR is low while initializing the modem. Verify modem is turned on.

             CTS is low while initializing modem.

have you activated your handset's modem. If no then call *333 and tell them to activate your modem.

Edited June 2, 2005 by Chirag