papikondalu 1 Report post Posted October 3, 2005 Hi, If 00000 SPC code does not work for u then the following procedure might help in getting the SPC code. The following procedure was listed somewhere for SE47. However, it also works for 7135. Well it took some doing but here it is How to find your SPC (Service Programming Code) for Kyocera 7135 using BitPim. 0. Put Kyocera 7135 in service programming mode (hold back light button for around 10 seconds - while holding this tap with stylus on fax/modem - Select "service programming mode") 1. Connect Serial Data cable to 7135 and open BitPim 2. Expand the folder NVM and the sub folder NVM 3. Double click on the file nvm_security 4. The last 6 digits on the bottom right hand side are the SPC for your phone. I've found two 6 digit numbers. One works with 7135 service programming menu. Another code works with PST software. Don't know why two numbers Also, if you cannot see folder information in BitPim. Try resetting the 7135 and try the above procedure. Happy exploration. -PK Share this post Link to post Share on other sites
ashoksoft 83 Report post Posted October 3, 2005 Hmm ... now we have another hackable phone ... good work papikondalu . All the best Cheers Ashok Share this post Link to post Share on other sites
