Ashokjp 15 Report post Posted June 17, 2004 You can read the code using UniCDMA See this topic http://www.rimweb.com/forums/index.php?showtopic=1034 Share this post Link to post Share on other sites
vinodh 0 Report post Posted June 20, 2004 Hi all, i am a new member to rimWEB , but i was glad to see the forum really very active & busy always. I am always a guy who is very much passionate with comps, i read most of the Posts by the users that really impressed me with a idea that u guyz are all really geeky that too special words to Ashok, Arun, Static,Emmi,NGcoders and more. i wish that u are all gonna have a real good future once u are fully into a field of this kind , May god bless u all Anyway, i got a Reliance LG 2030 fone that is Deactivated , i brought USB cable and it did was not a use for me, because i was not able to use it, as my system detectys the USB , but it does not detects that as the USB cable for reliance and i am not able to use iti got BITPIM 0.7.12 but all was a vain, i was not able to connect it , cos, it got options to connect to the COM ports alone, i got only USB. So i decided to buy the Serial , i too did, the cable was a little typical it had both USB & Serial pin attached with the mobile plugging pin.but it also again irritates me, It charges thro the USB from the cable, and it does not again work with the serial pin. plz help me. i need assistance . 15:28:19.720 COM1: Opening port COM1, 115200 baud, timeout 3.000000, hardwareflow 0, softwareflow 0 15:28:19.990 COM1: Open of comm port suceeded 15:28:19.990 LG-VX4400: Attempting to contact phone 15:28:19.990 LG-VX4400: Listing dir '' 15:28:23.069 COM1: Timed out waiting for 7e, requested bytes 1 - 0 bytes read 15:28:23.339 COM1: Changed port speed to 38400 15:28:26.799 COM1: Timed out waiting for 7e, requested bytes 1 - 0 bytes read 15:28:27.079 COM1: Changed port speed to 115200 15:28:30.539 COM1: Timed out waiting for 7e, requested bytes 1 - 0 bytes read 15:28:33.559 LG-VX4400: No response to setting QCDMG mode 15:28:33.559 COM1: Changed port speed to 115200 15:28:37.069 LG-VX4400: No response to setting QCDMG mode 15:28:37.289 COM1: Changed port speed to 19200 15:28:40.750 LG-VX4400: No response to setting QCDMG mode 15:28:40.750 COM1: Port speed 230400 not supported 15:28:43.779 COM1: Timed out waiting for 7e, requested bytes 1 - 0 bytes read 15:28:44.000 COM1: Changed port speed to 38400 15:28:47.680 COM1: Timed out waiting for 7e, requested bytes 1 - 0 bytes read 15:28:47.890 COM1: Changed port speed to 115200 15:28:51.359 COM1: Timed out waiting for 7e, requested bytes 1 - 0 bytes read 15:28:51.410 Error: Device needs attention - LG-VX4400 on COM1 LG-VX4400 on COM1: The phone is not responding while transitioning mode from none to brew. See the help for troubleshooting tips and again 15:28:19.720 COM1: Opening port COM1, 115200 baud, timeout 3.000000, hardwareflow 0, softwareflow 0 15:28:19.990 COM1: Open of comm port suceeded 15:28:19.990 LG-VX4400: Attempting to contact phone 15:28:19.990 LG-VX4400: Listing dir '' 15:28:19.990 LG-VX4400: brew request Data - 2 bytes <#! p_brew.memoryconfigrequest !#> 00000000 59 0c Y. 15:28:23.069 COM1: Timed out waiting for 7e, requested bytes 1 - 0 bytes read 15:28:23.069 COM1: Incomplete read was Data - 0 bytes 15:28:23.339 COM1: Changed port speed to 38400 15:28:23.839 LG-VX4400: brew request Data - 2 bytes <#! p_brew.memoryconfigrequest !#> 00000000 59 0c Y. 15:28:26.799 COM1: Timed out waiting for 7e, requested bytes 1 - 0 bytes read 15:28:26.799 COM1: Incomplete read was Data - 0 bytes 15:28:27.079 COM1: Changed port speed to 115200 15:28:27.569 LG-VX4400: brew request Data - 2 bytes <#! p_brew.memoryconfigrequest !#> 00000000 59 0c Y. 15:28:30.539 COM1: Timed out waiting for 7e, requested bytes 1 - 0 bytes read 15:28:30.539 COM1: Incomplete read was Data - 0 bytes 15:28:30.539 COM1: Writing Data - 10 bytes 00000000 41 54 24 51 43 44 4d 47 0d 0a AT$QCDMG.. 15:28:33.559 LG-VX4400: No response to setting QCDMG mode 15:28:33.559 COM1: Changed port speed to 115200 15:28:34.049 COM1: Writing Data - 10 bytes 00000000 41 54 24 51 43 44 4d 47 0d 0a AT$QCDMG.. 15:28:37.069 LG-VX4400: No response to setting QCDMG mode 15:28:37.289 COM1: Changed port speed to 19200 15:28:37.789 COM1: Writing Data - 10 bytes 00000000 41 54 24 51 43 44 4d 47 0d 0a AT$QCDMG.. 15:28:40.750 LG-VX4400: No response to setting QCDMG mode 15:28:40.750 COM1: Port speed 230400 not supported 15:28:40.750 LG-VX4400: brew request Data - 2 bytes <#! p_brew.memoryconfigrequest !#> 00000000 59 0c Y. 15:28:43.779 COM1: Timed out waiting for 7e, requested bytes 1 - 0 bytes read 15:28:43.779 COM1: Incomplete read was Data - 0 bytes 15:28:44.000 COM1: Changed port speed to 38400 15:28:44.650 LG-VX4400: brew request Data - 2 bytes <#! p_brew.memoryconfigrequest !#> 00000000 59 0c Y. 15:28:47.680 COM1: Timed out waiting for 7e, requested bytes 1 - 0 bytes read 15:28:47.680 COM1: Incomplete read was Data - 0 bytes 15:28:47.890 COM1: Changed port speed to 115200 15:28:48.390 LG-VX4400: brew request Data - 2 bytes <#! p_brew.memoryconfigrequest !#> 00000000 59 0c Y. 15:28:51.359 COM1: Timed out waiting for 7e, requested bytes 1 - 0 bytes read 15:28:51.359 COM1: Incomplete read was Data - 0 bytes 15:28:51.410 Error: Device needs attention - LG-VX4400 on COM1 LG-VX4400 on COM1: The phone is not responding while transitioning mode from none to brew. See the help for troubleshooting tips i really wonder that y it does nt work for me. do anyone here have USed to connect the BITPIM with a USB cable ???? if so plz help me, do anyone from here know any good software that converts the USB to a vitrual COM port ??? i heard that there were some softwares to do that are there any one from CHENNAI ???? plz PM me Thank You, Vinodh.T Share this post Link to post Share on other sites
Arun 795 Report post Posted June 20, 2004 USB cable did not work for me. So I brought a serial cable (for Rs.275) and it worked perfectly ! Share this post Link to post Share on other sites
Ashokjp 15 Report post Posted June 20, 2004 I guess you can use USB with Bitpim.. It dint work for few and it did work for some others When you install the R-Connect drivers, it will convert your USB to a new virtual com port.. You download the drivers from here LG 2030 USB Then Open Bitpim Go to settings and select the new port which represents your USB and try now One more thing.. You wont get the file system in the first trial.. I mean after you click the "/" it will show and error and then you have click it again to get it properly Share this post Link to post Share on other sites
vinodh 0 Report post Posted June 20, 2004 Thx Arnu & Ashok, Ashok it was really nice , thx abt that. As arun adviced me, i need to buy another Serial cable inspite of me having a SERIAL & a USB cable Thx anyway for ur suggestions Vinodh.T Share this post Link to post Share on other sites
pmchaudhary 0 Report post Posted June 20, 2004 I have installed the 0.7.12 and connected to the LG7130 Phone but when i tried to get the phone data it is throwing following error. can any one hel me in to resolve this An unexpected exception has occurred. Please see the help for details on what to do. Traceback (most recent call last): File "gui.pyo", line 152, in run File "gui.pyo", line 92, in __call__ File "gui.pyo", line 1117, in getdata File "gui.pyo", line 1111, in getfundamentals File "com_lgvx4400.pyo", line 92, in getfundamentals File "com_brew.pyo", line 221, in getfilecontents File "com_brew.pyo", line 360, in sendbrewcommand BrewNoSuchFileException: No such file Variables by last 8 frames, innermost last Frame __bootstrap in threading.pyo at line 436 self = <WorkerThread(BitPim helper, started daemon)> Frame run in gui.pyo at line 145 e = <com_brew.BrewNoSuchFileException instance at 0x01B7F918> res = None self = <WorkerThread(BitPim helper, started daemon)> item = (<gui.Request instance at 0x01B7F760>, <gui.Callback instance at 0x01B7FAD0>) call = <gui.Request instance at 0x01B7F760> ex = <com_brew.BrewNoSuchFileException instance at 0x01B7F918> resultcb = <gui.Callback instance at 0x01B7FAD0> first = 0 Frame __call__ in gui.pyo at line 92 self = <gui.Request instance at 0x01B7F760> args = () d = {} kwargs = {} Frame getdata in gui.pyo at line 1117 self = <WorkerThread(BitPim helper, started daemon)> req = <guiwidgets.GetPhoneDialog instance; proxy of C++ wxDialog instance at _17f8a20_ Frame getfundamentals in gui.pyo at line 1111 self = <WorkerThread(BitPim helper, started daemon)> results = {'uniqueserial': 'f0ceba09605fabefa66f8373d14bdd845c574f8f'} Frame getfundamentals in com_lgvx4400.pyo at line 92 self = <com_lgvx4400.Phone instance at 0x01B7FAA8> results = {'uniqueserial': 'f0ceba09605fabefa66f8373d14bdd845c574f8f'} Frame getfilecontents in com_brew.pyo at line 221 self = <com_lgvx4400.Phone instance at 0x01B7FAA8> req = <p_brew.readfilerequest object at 0x01B5A730> start = 1087767933.0610001 file = 'pim/pbgroup.dat' data = <cStringIO.StringO object at 0x01B5A920> desc = 'Reading pim/pbgroup.dat' Frame sendbrewcommand in com_brew.pyo at line 360 responseclass = <class 'p_brew.readfileresponse'> origdata = 'Y\x04\x06g\xdb~' d = 0 err = 6 buffer = <prototypes.buffer instance at 0x01B7FC10> request = <p_brew.readfilerequest object at 0x01B5A730> callsetmode = True firsttwo = 'Y\x04' crc = 'g\xdb' data = 'Y\x04\x06' self = <com_lgvx4400.Phone instance at 0x01B7FAA8> Share this post Link to post Share on other sites
MasterMind 0 Report post Posted June 21, 2004 Guys, I also had the same problem vinodh is facing.... I got the same message once... but, then when I tried to connect after connecting thru hyperterminal.. as instructed by ashok... i got thru.... -Uday Share this post Link to post Share on other sites
Arun 795 Report post Posted June 21, 2004 Check out this post, MasterMind Share this post Link to post Share on other sites
Utsav 0 Report post Posted June 21, 2004 I am having a lot of problem regarding the connection with the phone with Com ports. More often than not, the Bitpim fails to communicate with the phone. i really don't know why and how it works simetimes and sometimes it doesn't. Can anyone tell me if there are some tweaks to configure my PC? I'm using Windows98SE on a Celeron 633Mhz. Share this post Link to post Share on other sites
Ashokjp 15 Report post Posted June 21, 2004 You dont need any special tweaks Bitpim usually connects to LG 2030 after a error ie. after you click / the second time If you are not able to connect after second time and if its so that you were able to connect earlier, try restarting the phone and try again Share this post Link to post Share on other sites
sklm 0 Report post Posted June 23, 2004 Hi Everybody, My friends knows that I can unlock LG 2030 or RD 7130 or moonlight. So, today one of my friends came and gave his phone to unlock. But bitpin not recognised the phone. I have both USB and serial cables. I unlocked many phones (LG 2030 or RD 7130 or moonlight) but this time I got an error. After bitpim refused to detect the phone I attached my 2030 and refreshed bitpim and it showed the file system as before. What is the problem with my friend's 2030? Share this post Link to post Share on other sites
Jacob 0 Report post Posted July 17, 2004 hi mates, bitpim has released their latest version 0.7.14, i am yet to test it as its still downloading, thanx to the highspeed service of R-Connect (its almost 40 mins now, still 50% left hahaha ) heres the link http://optusnet.dl.sourceforge.net/sourcef....7.14-setup.exe if anyone tested it on RD2130, pls share the experience here. Share this post Link to post Share on other sites
z80pio 0 Report post Posted July 20, 2004 Hi all, I tried to use bitpim [http://bitpim.sourceforge.net] to access my rd2030. I just can view the file system, other tabs does not work and raise an exception everytime. Did anyone able to access/modify ringtone/wallpaper/contacts tabs from bitpim? Thanks z80pio Share this post Link to post Share on other sites
ssr 10 Report post Posted July 20, 2004 Hey have u seen the following topic How To Upload Ringtones/wallpapers ?, A newbie guide Share this post Link to post Share on other sites
Dhananajay 0 Report post Posted August 6, 2004 i downloaded bitpim .7 i have LG RD 7230 but my model is not listed in choose phone in bitpim which should i use Share this post Link to post Share on other sites
Ganesh 0 Report post Posted August 6, 2004 Use LG-VX4400 Share this post Link to post Share on other sites
kshah 452 Report post Posted August 12, 2004 Does any one knows where MIN / NAM number is stored in LG RD 2030 file system? Share this post Link to post Share on other sites
karpar 1 Report post Posted August 13, 2004 I don't think the MIN/NAM are stored in the file structure...not seen it anyway. The easier way is to press Menu and Zero if you use Rel11 or use Inter PST. This topic is off bounds btw. Share this post Link to post Share on other sites
Dhananajay 0 Report post Posted August 18, 2004 hi again i am tyring to connect LG RD 7230 with bitpim .7 the error message comes is An unexpected exception has occurred.Please see the help for details on what to do. Traceback (most recent call last):  File "gui.pyo", line 152, in run  File "gui.pyo", line 92, in __call__  File "gui.pyo", line 1129, in getdata  File "gui.pyo", line 1123, in getfundamentals  File "com_lgvx4400.pyo", line 92, in getfundamentals  File "com_brew.pyo", line 220, in getfilecontents  File "com_brew.pyo", line 359, in sendbrewcommand BrewNoSuchFileException: No such file Variables by last 8 frames, innermost last Frame __bootstrap in threading.pyo at line 436     self = <WorkerThread(BitPim helper, started daemon)> Frame run in gui.pyo at line 145        e = <com_brew.BrewNoSuchFileException instance at 0x01D22DA0>       res = None     self = <WorkerThread(BitPim helper, started daemon)>     item = (<gui.Request instance at 0x01D22F80>, <gui.Callback instance at 0x01D22D78>)     call = <gui.Request instance at 0x01D22F80>      ex = <com_brew.BrewNoSuchFileException instance at 0x01D22DA0>   resultcb = <gui.Callback instance at 0x01D22D78>      first = 0 Frame __call__ in gui.pyo at line 92     self = <gui.Request instance at 0x01D22F80>     args = ()        d = {}    kwargs = {} Frame getdata in gui.pyo at line 1129     self = <WorkerThread(BitPim helper, started daemon)>       req = <guiwidgets.GetPhoneDialog instance; proxy of C++ wxDialog instance at _a9e4e0_w Frame getfundamentals in gui.pyo at line 1123     self = <WorkerThread(BitPim helper, started daemon)>     results = {'uniqueserial': '63aee093ad4030bda09b0520815248c04d90371e'} Frame getfundamentals in com_lgvx4400.pyo at line 92     self = <com_lgvx4400.Phone instance at 0x01CE8440>     results = {'uniqueserial': '63aee093ad4030bda09b0520815248c04d90371e'} Frame getfilecontents in com_brew.pyo at line 220     self = <com_lgvx4400.Phone instance at 0x01CE8440>       req = <p_brew.readfilerequest object at 0x01CFA3B0>      start = 1092800484.9679999     file = 'pim/pbgroup.dat'     data = <cStringIO.StringO object at 0x01CFA760>     desc = 'Reading pim/pbgroup.dat' Frame sendbrewcommand in com_brew.pyo at line 359  responseclass = <class 'p_brew.readfileresponse'>   origdata = 'Y\x04\x06g\xdb~'        d = 0       err = 6    buffer = <prototypes.buffer instance at 0x01D22F08>     request = <p_brew.readfilerequest object at 0x01CFA3B0>   callsetmode = True   firsttwo = 'Y\x04'       crc = 'g\xdb'     data = 'Y\x04\x06'     self = <com_lgvx4400.Phone instance at 0x01CE8440> what went wrong ??? Share this post Link to post Share on other sites
mitian 0 Report post Posted August 28, 2004 Thanks to this website n members i successfully changed my ringtones n wallpapers LG RD2030 USB connect cable using the File system But once i tried to Select "Get Phone Data" Then it returned the following error An unexpected exception has occurred. Please see the help for details on what to do. Traceback (most recent call last): File "gui.pyo", line 197, in run File "gui.pyo", line 138, in __call__ File "gui.pyo", line 1045, in dirlisting File "com_lgvx4400.pyo", line 607, in getfilesystem File "com_lgvx4400.pyo", line 886, in sendbrewcommand File "com_lgvx4400.pyo", line 740, in setmode File "com_lgvx4400.pyo", line 767, in _setmodebrew File "com_lgvx4400.pyo", line 929, in _sendbrewcommand BrewCommandException: Brew Error 0x13 From then on everytime i try to access the file system the error is repeating.. I tried re-installing bit pim but it didnt solve the problem Can anyone help me pls.... Magesh :'( Share this post Link to post Share on other sites
Arun 795 Report post Posted August 28, 2004 So you were able to access it and change the ringtones/wallpapers initially before the error started showing ? USB cables often have problems with Bitpim. Share this post Link to post Share on other sites
iiii_pretender_iiii 0 Report post Posted August 28, 2004 Mitian, The error messge you've submitted is just part of the error msg, Copy the whole thing so we can figure out exactly what happened and why it happened . If you want copy the whole thing to a text file and attach it. Also mention what Os you are using. Share this post Link to post Share on other sites
StaticElectricity 8 Report post Posted August 28, 2004 hey mitian, since u say that it gives an error every time, just keep in mind that usuall u have to try 2 times to access the filesystem. The first time it always gives an error 'Device needs attention' Share this post Link to post Share on other sites
compenn 0 Report post Posted August 28, 2004 i also faced the same problem. i'm using LG 2030 n serial cable with it. i could not even change ringtone or wallpaper. i'm using WINDOWS 2000. Share this post Link to post Share on other sites
mitian 0 Report post Posted August 28, 2004 :'( Hey folks thanks for ur interest But human mind is silly off course I was concentrating wat could be the problem with computer but everthing back in order when i switched off n removed the battery put back again and bingo i m back in track thnx again for ur time with this topic Happily here after.... Share this post Link to post Share on other sites
